Our Brands

Wireless

1 2 3 4
Newest Items First
128 Per Page
GPS-29491 GNSS Flex pHAT - DAN-F10N
US$86.22

This SparkFun GNSS Flex pHAT kit combines the dual-band DAN-F10N with the capability of a Raspberry Pi or other 40-pin single-board computer.

Delivery within 2-3 weeks
+ −
Add to wish list
GPS-29061 SparkPNT GNSS Flex Module - DAN-F10N
US$58.92
The SparkFun DAN-F10N GNSS Flex Module provides L1/L5, meter-level accuracy, and a plug-in modular design for your GNSS projects. This product requires...
In stock
+ −
Add to wish list
WAVE-31752 L76K GNSS Module Raspberry Pi Pico, GPS / BeiDou (BDS) / GLONASS / QZSS
US$22.52
The Waveshare 31752 is the Pico-GPS-L76K module which is the L76K GNSS Module for Raspberry Pi Pico, GPS / BeiDou (BDS) / GLONASS / QZSS Support, supports A-GNSS Function.
In stock
+ −
Add to wish list
WAVE-31594 Wireless MINIPCIE RTL8852BE NIC, Gigabit Dual-Band Wi-Fi 6, Bluetooth 5.2
US$15.24
The Waveshare 31594 is the Wireless-MINIPCIE-RTL8852BE device, which is the Wireless WiFi 6 module MINIPCIE RTL8852BE, Gigabit Dual band Wi-Fi 6, norm...
In stock
+ −
Add to wish list
WAVE-31593 Wireless MINIPCIE AX210 NIC, Gigabit Tri-Band Wi-Fi 6E, 802.11AX Standard, Bluetooth 5.3
US$31.62

The Waveshare 31593 is the Wireless-MINIPCIE-AX210 which is a Wireless MINIPCIE AX210 NIC Gigabit Tri-Band Wi-Fi 6E, 802.11AX Standard, Bluetooth 5.3.

In stock
+ −
Add to wish list
WAVE-31592 Wireless MINIPCIE AX200 NIC, Gigabit Dual-Band Wi-Fi 6, 802.11AX Standard, Bluetooth 5.2
US$30.71

The Waveshare 31592 is the Wireless-MINIPCIE-AX200 which is a wireless MINIPCIE AX200 Gigabit Dual-Band Wi-Fi 6, 802.11AX Standard with Bluetooth 5.2 .

In stock
+ −
Add to wish list
ANT-36, 32mm × 14mm 3dBi PCB Antenna with IPEX MHF I Connector
US$2.96

This 3 dBi PCB antenna supports both 2.4GHz and 5GHz frequency bands, ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible) connector and a RG1.13 coaxial cable. The rigid PCB ensures signal consistency.

In stock
+ −
Add to wish list
ANT-34, 40mm × 8mm 3dBi PCB Antenna with IPEX MHF I Connector
US$3.14

This 3 dBi PCB antenna supports both 2.4GHz and 5GHz frequency bands, ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible) connector and a RG1.13 coaxial cable. The rigid PCB ensures signal consistency.

In stock
+ −
Add to wish list
ANT-33, 51mm × 9mm 4dBi PCB Antenna with IPEX MHF I Connector
US$2.59

This 4 dBi PCB antenna supports both 2.4GHz and 5GHz frequency bands, ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible) connector and a RG1.13 coaxial cable. The rigid PCB ensures signal consistency.

In stock
+ −
Add to wish list
ANT-32, 48mm × 14mm 8dBi PCB Antenna with IPEX MHF I Connector
US$3.14

This high-gain PCB antenna supports both 2.4GHz and 5GHz frequency bands, ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible) connector and a RG1.13 coaxial cable. The rigid PCB ensures signal consistency.

In stock
+ −
Add to wish list
ANT-31, 95mm x 13mm 8dBi PCB Antenna with IPEX MHF I Connector
US$3.14

This high-gain PCB antenna supports both 2.4GHz and 5GHz frequency bands, ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible) connector and a RG1.13 coaxial cable. The rigid PCB ensures signal consistency.

In stock
+ −
Add to wish list
ANT-30, 25mm x 9mm 3dBi FPC Antenna with IPEX MHF I Connector
US$3.41

This 3 dBi FPC (Flexible Printed Circuit) antenna supports both 2.4GHz and 5GHz frequency bands, making it ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible, 1st Generation) connector and RG1.13 coaxial cable, along with an adhesive backing for easy internal mounting.

In stock
+ −
Add to wish list
ANT-29, 40mm x 18mm 5dBi FPC Antenna with IPEX MHF I Connector
US$2.50

This 5 dBi FPC (Flexible Printed Circuit) antenna supports both 2.4GHz and 5GHz frequency bands, making it ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible, 1st Generation) connector and RG1.13 coaxial cable, along with an adhesive backing for easy internal mounting.

In stock
+ −
Add to wish list
ANT-28, 45mm x 10mm 5dBi FPC Antenna with IPEX MHF I Connector
US$2.59

This 5 dBi FPC (Flexible Printed Circuit) antenna supports both 2.4GHz and 5GHz frequency bands, making it ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible, 1st Generation) connector and RG1.13 coaxial cable, along with an adhesive backing for easy internal mounting.

In stock
+ −
Add to wish list
ANT-27, 50mm x 14mm 5dBi FPC Antenna with IPEX MHF I Connector
US$2.68

This 3 dBi FPC (Flexible Printed Circuit) antenna supports both 2.4GHz and 5GHz frequency bands, making it ideal for Wi-Fi and Bluetooth applications. It features an IPEX MHF I (U.FL-compatible, 1st Generation) connector and RG1.13 coaxial cable, along with an adhesive backing for easy internal mounting.

In stock
+ −
Add to wish list
GPS-16481 SparkFun GPS-RTK-SMA Breakout Board - ZED-F9P (Qwiic)
US$363.77
The SparkFun GPS-RTK-SMA is the latest in a line of high-precision RTK boards featuring the ZED-F9P module from u-blox. The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions including RTK capable of 10mm, 3-D accuracy.
Delivery within 2-3 weeks
+ −
Add to wish list
GPS-17285 SparkFun GPS Breakout - NEO-M9N, SMA (Qwiic)
US$108.97
The SparkFun NEO-M9N GPS Breakout is a high-quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~1.5-meter accuracy.
In stock
+ −
Add to wish list
CAB-29325 50-Ohm U.FL to U.FL Mini Coax Cable - 50mm
US$5.41
CAB-29325 50-Ohm U.FL to U.FL Mini Coax Cable - 50mm
Delivery within 2-3 weeks
+ −
Add to wish list
XB24-API-001 Emitter-Receiver RF Module Standard 802.15.4 Wire antenna integrated
US$53.69
This RF module provides cost-effective wireless connectivity to electronic devices. They are interoperable with other ZigBee PRO feature set devices, including devices from other vendors.
In stock
+ −
Add to wish list
ANT-14, 2.4G/5.8G GSM Antenna 6DBI Dual Frequency with IPX4 to RP-SMA Connector
US$8.14
ANT-14, 2.4G/5.8G GSM Antenna 6DBI Dual Frequency with IPX4 to RP-SMA Connector
In stock
+ −
Add to wish list
ANT-18, 5dB GSM Antenna with Magnetic Base (3m)
US$7.96
This is a GSM antenna with SMA connector. Its magnetic base can be easily absorbed on the surface of ferrous material. The working frequency 800-2200 MHz meets the most requirements of GSM application. This Antenna extension cable uses 174 copper material, which has less impedance than the other cable. The antenna signal gain could reach 5dBi.
In stock
+ −
Add to wish list
WL-371 15W Type-C Wireless Charger Transmitter Module
US$11.78
15W Ultra-thin Wireless Charger Transmitter Module USB Type C + Coil for QI Circuit Board with Protection
In stock
+ −
Add to wish list
WAVE-29333, Wireless BE200 NIC, Gigabit Tri-Band Wi-Fi 7, IEEE 802.11a/b/g/n/ac/be/ax Standard, Bluetooth 5.4
US$36.35
WAVE-29333, Wireless BE200 NIC, Gigabit Tri-Band Wi-Fi 7, IEEE 802.11a/b/g/n/ac/be/ax Standard, Bluetooth 5.4 Wi-Fi 7 Wireless BE200 NIC Tri-Band...
In stock
+ −
Add to wish list
WAVE-27698, PCIe to M.2 4G/5G And USB 3.2 HAT for Raspberry Pi 5, Compatible with SIMCom/Quectel 4G/5G modules, Raspberry Pi 5 HAT, High-speed Networking
US$53.46
WAVE-27698, PCIe to M.2 4G/5G And USB 3.2 HAT for Raspberry Pi 5, Compatible with SIMCom/Quectel 4G/5G modules, Raspberry Pi 5 HAT, High-speed Networking...
In stock
+ −
Add to wish list
TEL0161 Gravity: CAT1 SIM7600G Global 4G Communication and GNSS Positioning Module (10Mbps/5Mbps)
US$108.97
The SIM7600G is an integrated wireless communication module. It features 4G CAT1 with an uplink speed of 5Mbps and a downlink speed of 10Mbps, and supports GNSS positioning (GPS, BD, GLONASS). The module is compatible with Raspberry Pi, Arduino, and LattePanda single-board computers, and can be used as a 4G network card.
In stock
+ −
Add to wish list
WL-312, 433Mhz RF Module Receiver (RX480E) and Transmitter Module (TX118SA-4)
US$8.87
4-Channel Output Module Wireless Coding Transmitter + Decoding Receiver 433 Mhz Remote Controls
In stock
+ −
Add to wish list
WAVE-26750 ESP32-S3 SIM7670G 4G Development Board, LTE Cat-1 / WiFi / Bluetooth / GNSS Positioning Support, Global Coverage Multi Band
US$81.67
The ESP32-S3-SIM7670G-4G is a multi-functional and high-performance microcontroller development board designed by Waveshare, build-in SIM7670G 4G communication module, onboard OV series camera interface, TF card slot, RGB colorful LED, 18650 battery holder (18650 battery is NOT included), battery voltage measurement IC, solar panel charging interface, and other peripherals. Adopts the ESP32-S3R2 chip, which integrates low-power WiFi and BLE 5.0, onboard external 16MB Flash and 2MB PSRAM, built-in hardware encryption accelerator, random number generator, HMAC, and digital signature module to meet the security requirements of the IoT. Equipped with SIM7670G Cat-1 4G communication module to achieve mobile network connection and meet the low-power requirements of IoT, mobile devices, outdoor monitoring, smart home, and other applications.
Delivery within 2-3 weeks
+ −
Add to wish list
XKB2-Z7T-WZM DIGI XBEE ZIGBEE Module Development Kit
US$117.16

XKB2-Z7T-WZM DIGI XBEE ZIGBEE Module Development Kit

In stock
+ −
Add to wish list
WAVE-26542 RP2040-LoRa Development Board, Integrates SX1262 RF Chip, Long-Range Communication, HF Version
US$22.70
RP2040-LoRa is a LoRa development board using the new generation of SX1262 RF chip, provides better performance than the SX127X series in power consumption, communication distance and power efficiency. Adopts LoRa modulation technology to solve the problem in the traditional design solutions which can not balance distance, anti-interference, and power consumption at the same time. Combines with LoRa gateway for connecting Cloud Server such as TTN and ChirpStack for quick verification.
In stock
+ −
Add to wish list
XBRR-24Z8ST Digi XBee® RR Pro Module - SMA Antenna
US$68.02
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing. The XBee RR 802.15.4 RF Module supports the needs of low-cost, low-power wireless sensor networks.
Delivery within 2-3 weeks
+ −
Add to wish list
XBRR-24Z8ST-J Digi XBee® RR Module - SMA Antenna
US$45.27
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing. The XBee RR 802.15.4 RF Module supports the needs of low-cost, low-power wireless sensor networks.
In stock
+ −
Add to wish list
XBRR-24Z8UT Digi XBee® RR Pro Module - U.FL Antenna
US$72.57
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing. The XBee RR 802.15.4 RF Module supports the needs of low-cost, low-power wireless sensor networks.
Delivery within 2-3 weeks
+ −
Add to wish list
XBRR-24Z8UT-J Digi XBee® RR Module - U.FL Antenna
US$45.27
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing. The XBee RR 802.15.4 RF Module supports the needs of low-cost, low-power wireless sensor networks.
Delivery within 2-3 weeks
+ −
Add to wish list
WRL-22131 SparkFun Digi XBee® Arduino Shield - USB-C (Qwiic)
US$18.96
The Sparkfun Digi XBee® Arduino Shield is your gateway to a world of wireless innovation on your favorite Arduino device. This shield integrates Digi's cutting-edge XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR Pro modules (or any existing through-hole Digi XBee module) with your trusty Arduino, empowering you to build wireless projects that reach further and do more than ever. Whether you're a seasoned developer or a curious beginner, the SparkFun Digi XBee® Arduino Shield - USB-C (Qwiic) empowers you to bring your wildest IoT ideas to life.
In stock
+ −
Add to wish list
WRL-22032 SparkFun Digi XBee® Explorer Regulated
US$19.72
Unleash the power of Digi XBee® modules with the next-gen SparkFun Digi XBee® Explorer Regulated! This versatile breakout board bypasses a USB-C connection, packing all the XBee functionality you need alongside the power of Digi's newest XBee 3 modules (XBee 3 LTE-M/NB-IoT and XBee RR Pro) into a single, convenient solution. The SparkFun Digi XBee® Explorer Regulated is the perfect companion for any low-power cellular IoT project. Its simplicity, versatility, and robust features make it ideal for beginners and seasoned developers.
In stock
+ −
Add to wish list
WRL-22043 SparkFun Digi XBee® Explorer USB-C
US$26.52
Unleash the power of Digi XBee® modules with the next-gen SparkFun Digi XBee® Explorer USB-C! This compact, easy-to-use adapter is the perfect bridge between your computer and any through-hole Digi XBee module, making prototyping and development a breeze. Whether you're a seasoned IoT architect or just starting your wireless journey, the Digi XBee® Explorer USB-C empowers you to bring your ideas to life.
In stock
+ −
Add to wish list
WRL-21636 SparkFun Digi XBee® Development Board
US$32.32
The SparkFun Digi XBee® Development Board is designed to help you quickly and easily prototype low-power cellular IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT, Digi XBee RR, and any existing through-hole Digi Xbee module. This board breaks out all the functionality of your XBee module and adds the ability to connect to the cellular network and (drumroll, please) GNSS.
In stock
+ −
Add to wish list
WL-TTGO-SX1276-O, LORA V1.3 915Mhz ESP32 SX1276 Module 0.96 OLED WIFI And Bluetooth LILYGO TTGO
US$48.91

This is the LORA V1.3 ESP32 Bluetooth WIFI LILYGO TTGO Development Board SX1276 Chip Module, 915Mhz.

In stock
+ −
Add to wish list
COM-13909 RFM69HCW Wireless Transceiver - 915MHz
US$9.96
This is the 915MHz base RFM69HCW Wireless Transceiver that is found on our RFM69 Breakout. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. It’s perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-25926 Quectel RM530N-GL IoT 5G Global Band Module, 5G Sub-6G & mmWave Module, M.2 Form Factor With 3GPP 5G Release 16 Specification
US$436.30
The RM530N-GL is a 5G Sub-6GHz module specially optimized for IoT/eMBB applications. Adopts 3GPP Release 16 specification and supports 5G non-standalone (NSA) and standalone (SA) modes. Designed in an M.2 form factor, RM530N-GL is compatible with Quectel RM520N 5G module series, easy for users to design the devices with single Sub-6 support or both Sub-6 & mmWave support. This module is an industrial-grade module for industrial and commercial applications only.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-25932 RM520N-GL 5G/4G/3G module designed for Jetson Nano, multi mode multi band, Options for 5G Module
US$400.17
This 5G/4G/3G Jetson Nano communication module provides options for SIMCom 5G module SIM8202G-M2 and Quectel 5G module RM520N-GL, supports 5G NSA and SA networking. The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-25830 RM520N-GL 5G M.2 to Gigabit Ethernet Converter, 5G M.2 to USB3.1, Aluminum Alloy Case, Wall-Mount Support, Quad Antennas
US$395.63
Supports 5G modules with M.2 (NGFF) Key B interface, compatible with mainstream 5G modules from the brands such as SIMCom, Quectel, and Fibocom. Supports 5G modules in 3042/3052 packages such as SIM82XX, RM5XX and FM160XX series. Onboard RTL8125 Ethernet chip, supports 5G to Gigabit Ethernet for high speed 5G networking via the Gigabit Ethernet port. Onboard USB 3.1 Type-A port for connecting to PC, Raspberry Pi, or Jetson series motherboards for high-speed 5G networking or debugging.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-25928 RM530N-GL 5G DONGLE Module, quad antennas, USB3.1 port, Aluminum Alloy Heatsink, M.2 Key B Interface
US$450.22
Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom, Quectel, and Fibocom 5G modules. Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules. USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network. 4x SMA antenna connectors, easy to install the antenna. Onboard SIM card slot for NANO SIM card. Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions.
Delivery within 2-3 weeks
+ −
Add to wish list
WL-BT06-E RF Wireless Bluetooth Transceiver Slave Module RS232 / TTL to UART converter and adapter for Arduino HC-06
US$7.96
This Wireless Bluetooth Transceiver Slave Module allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
In stock
+ −
Add to wish list
WAVE-25520, RM520N-GL industrial 5G Router, wireless CPE, snapdragon X62 onboard, 5G Global Band Module, Gigabit Ethernet and WiFi
US$578.71
RM520N-GL industrial 5G Router, wireless CPE, snapdragon X62 onboard, 5G Global Band Module, Gigabit Ethernet and WiFi
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-24388, SIM8262A-M2 5G HAT For Raspberry Pi, Quad Antennas 5G NSA, Multi-Band, 5G/4G/3G Compatible, With Case
US$416.28
SIM8262A-M2 5G HAT For Raspberry Pi, Quad Antennas 5G NSA, Multi-Band, 5G/4G/3G Compatible, With Case
Delivery within 2-3 weeks
+ −
Add to wish list
WIFI-ESP8266-D, ESP8266 Development Fixture Burning Board
US$13.60
The ESP8266 development fixture board serves as a programming tool for ESP8266 chips during the development process.
 
In stock
+ −
Add to wish list
ANT-900A-S GSM/GPRS Antenna SIM900A 3G Straight SMA Connector
US$3.41
ANT-900A-S GSM/GPRS Antenna SIM900A 3G Straight SMA Connector
Delivery within 2-3 weeks
+ −
Add to wish list
ANT-900A-RA GSM/GPRS Antenna SIM900A 3G Right Angle SMA Connector
US$3.41
ANT-900A-RA GSM/GPRS Antenna SIM900A 3G Right Angle SMA Connector
In stock
+ −
Add to wish list
WAVE-25482 GNSS L1+L2+L5 Multi-frequency Antenna
US$81.67
GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna, SMA-J Connector, Supports Multi-GNSS Positioning Systems, Sunproof And IP67 Waterproof, High-Temperature Tolerance.
In stock
+ −
Add to wish list
WAVE-25346 GNSS L1+L5 Dual-frequency Antenna
US$31.80
GNSS L1+L5 Dual-Frequency Active Antenna, SMA-J Connector, Supports Multi-GNSS Positioning Systems
In stock
+ −
Add to wish list
CAB-SMA-RPMF-10M Interface Cable - RP-SMA Male to RP-SMA Female (10M, RG58)
US$31.62
CAB-SMA-RPMF-10M Interface Cable - RP-SMA Male to RP-SMA Female (10M, RG58)
In stock
+ −
Add to wish list
CAB-SMA-RPMF-1M Interface Cable - RP-SMA Male to RP-SMA Female (1M, RG174)
US$8.14
Interface Cable - RP-SMA Male to RP-SMA Female (1M, RG174)
In stock
+ −
Add to wish list
CAB-SMA-RPMF-25 Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
US$5.41
CAB-SMA-RPMF-25 Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
In stock
+ −
Add to wish list
CAB-SMA-MF-25 Interface Cable - SMA Male to SMA Female (25cm, RG174)
US$5.41
Interface Cable - SMA Male to SMA Female (25cm, RG174)
In stock
+ −
Add to wish list
ANT-9147 IPEX to Female SMA Connector Adapter Cable
US$2.68
This RF adapter cable adapts the IPEX connection on an electronics module to an external antenna with a female SMA connection. Often times, small electronics save space by using a u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM) on the PCB.
In stock
+ −
Add to wish list
MOD-SIM800L-V2 GPRS GSM Module SIM800L V2 Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V
US$14.33
GPRS GSM Module SIM800L V2 Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V , supports quad-band GSM/GPRS network, available for...
In stock
+ −
Add to wish list
ANT-FM-3.5MM Retractable FM Antenna 3.5mm
US$3.59
ANT-FM-3.5MM Retractable FM Antenna 3.5mm. Features: Length retracted: 3,45 inches (88mm) Length extended: 10 inches (255mm) Plug Type: Male 3.5mm...
In stock
+ −
Add to wish list
WAVE-24780 AW-CB375NF Dual-Band Wireless NIC, 2.4G/5GHz Dual-Band WiFi 5, RTL8822CE-CG Core, Bluetooth 5.0, Supports BLE
US$20.70
Supports 2.4G/5GHz dual-band, the speed up to 300Mbps in the 2.4GHz band and 867Mbps in the 5GHz band. Supports Bluetooth 5.0 standard, compatible with Bluetooth 2.1+EDR. Adopts NGFF (M.2 A/E Key) interface. Compatible with IEEE 802.11ac/m MIMO OFDM wireless technology, two transmit and two receive paths. Supports Linux, Windows 10/11, etc.
In stock
+ −
Add to wish list
TEL0149 Gravity: BLE Sensor Beacon Pack (5 PCS)
US$24.98
This Gravity wireless BLE Sensor Beacon with a built-in 11-bit ADC can collect data from digital and analog sensors and broadcast it via Bluetooth. Users can access the sensor data within broadcasting range on a Bluetooth-equipped device such as a smartphone or ESP32.
In stock
+ −
Add to wish list
WAVE-24654 SX1262 LoRaWAN Node Module Expansion Board for Raspberry Pi, With Magnetic CB antenna, frequency: 868/915MHz With GNSS Function
US$39.81
This series of products are LoRa modules using the new generation of SX1262 RF chip, with the features of long communication distance and strong anti-interference ability. Suitable for Sub-GHz frequency band network, and is available in LF (410~510MHz) or HF (850~930MHz) frequency band versions. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network. In addition to the basic LoRaWAN version, it also provides optional GNSS positioning function with GPS/BD support.
In stock
+ −
Add to wish list
PSM-350, Fast Charging 20W Qi Wireless Charger Transmitter Module 20W with USB Type-C
US$15.88
Fast Charging 20W Qi Wireless Charger Transmitter Module with USB Type-C Wireless charging allows you to charge a device, like your smartphone, without...
In stock
+ −
Add to wish list
WAVE-24370 LC76G Multi-GNSS Module, Supports GPS, BDS, GLONASS, Galileo, QZSS
US$22.52
The LC76G GPS Module is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS, Galileo and QZSS systems, allows multi-system combined or single-system independent positioning. Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function, provides a good positioning experience of fast, accurate, high-performance.
In stock
+ −
Add to wish list
GK-HC-05 geeekus HC-05 Bluetooth Transmission Module for Arduino Master Slave
US$14.51
You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. The default values of the module can be configured by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you. However do not expect this module to transfer multimedia like photos or songs.
In stock
+ −
Add to wish list
WAVE-24486 RM520N-GL 5G HAT for Raspberry Pi with Case, Quad Antennas LTE-A, Global Band, GNSS Positioning, Support 3GPP 16, 4G/3G
US$436.75
Comes with the Quectel RM520N-GL 5G Sub-6GHz module, supports various network standards such as 5G/4G/3G and LTE-A, GNSS positioning support. Comes with M.2 TO 4G/5G HAT, compatible with the RM500U-CN/RM500Q-GL/RM502Q-AE/RM520N-GL series 5G modules. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano to enable high speed 5G network. Standard M.2 B KEY slot, compatible with SIM7600X/EM06X/SIM82XX/RM5XX series 4G/5G M.2 modules.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-24485 Quectel RM520N-GL IoT 5G Global Band Module, 5G Sub-6G Module, M.2 Form Factor With 3GPP 5G Release 16 Specification
US$363.77
The RM520N-GL is a 5G Sub-6GHz module specially optimized for IoT/EMBB applications. Adopts 3GPP Release 16 specification and supports 5G non-standalone (NSA) and standalone (SA) modes. Designed in an M.2 form factor, RM520N-GL is compatible with Quectel RM50xQ 5G module series, LTE-A Cat 6 module EM06, Cat 12 module EM12/EM12xR/EM120K series, and Cat 16 module EM160R-GL, facilitating migration from LTE-A to 5G. This module is an industrial-grade module for industrial and commercial applications only.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-24515 USB to LoRa Data Transfer Module, Based On SX1262, HF version, TCXO Crystal Oscillator
US$27.25

The Waveshare 24515 USB to LoRa Data Transfer Module with TCXO Crystal Oscillator is based on the SX1262 and is suitable For Data Acquisition In Industry And Agriculture. This HF version is 850~930MHz frequency for Europe, America and Oceania.

In stock
+ −
Add to wish list
WAVE-24162 SIM8262A-M2 SIMCom original 5G module, M.2 form factor, Qualcomm Snapdragon X62
US$345.57
The SIM8262A-M2 is the Multi-Band 5G NR/LTE-FDD/LTE-TDD/HSPA+ module which supports R16 5G NSA/SA up to 2.4Gbps data transfer. It has strong extension capability with abundant interfaces including PCIe, USB3.1, GPIO etc. The module provides much flexibility and ease of integration for customer's applications.
Delivery within 2-3 weeks
+ −
Add to wish list
WIFI-ESP-C3-32S-4, ESP32 C3 32S 5MB Flash WiFi+Bluetooth with PCB Antenna
US$5.41
The ESP-C3-32S is a Wi-Fi module developed by Ai-Thinker. This module core processor ESP32-C3 is a Wi-Fi+ BLE combination of system-level chips (SoC),...
In stock
+ −
Add to wish list
WAVE-24095 GNSS Active Ceramic Positioning Antenna, IPEX 1 connector, Supports multiple satellite positioning systems
US$6.23
Supports Multiple Satellite Positioning Systems Such As BD, GPS, GLONASS.
In stock
+ −
Add to wish list
GK-ESP32-WROOM-32, geeekus Wi-Fi + Bluetooth BLE Low Power IOT Microcontroller, 38 pin, usb micro, authentic ESP32-WROOM-32 and CP2102
US$17.97
If you're interested in making your project connect to the web and be part of the grander scheme of IOT (Internet of Things) then this board is the gadget for you! Like other microcontrollers and microprocessors, the ESP32 now has built in power regulation circuits, on board antennas and noise filters and fits snuggly onto a breadboard for rapid prototyping. The ESP32 can interface with other MCUs as master or slave or function completely standalone through SPI/SDIO, I2C and UART. The microcontroller can also support an SD card and multiple sensors .
The geeekus ESP32-WROOM-32 is a solid development board with original parts and yellow text on a black board, which makes identifying pinsets easier on the eyes.
In stock
+ −
Add to wish list
WAVE-23992 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning (SIM7600G-H Standard version plus SPC Antenna), Global Application
US$90.50

Compatible with 2G/3G/4G network. Supports dial-up, telephone call, SMS, TCP, UDP, MQTT, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning. Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc. Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header.

In stock
+ −
Add to wish list
CAB-21281 Interface Cable - SMA Female to SMA Male (10m, RG58)
US$18.85
When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while you stay in doors and warm at your keyboard. This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF loss as possible.
Delivery within 2-3 weeks
+ −
Add to wish list
WRL-20856 SparkFun Antenna - SMA, 2dBi (433MHz)
US$26.39
A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna.
Delivery within 2-3 weeks
+ −
Add to wish list
WRL-20855 SparkFun DiPole Antenna - SMA, 2dBi (868MHz)
US$28.82
Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes. Utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna.
In stock
+ −
Add to wish list
WIFI-NODEMCU3, NodeMCU V3 Lua Wi-Fi ESP8266 Microcontroller with CH340 USB Communication Chip
US$8.87
The NodeMCU V3 is an open source ESP8266 development kit, armed with the CH340G USB-TTL Serial chip. With an integrated USB interface, and an ESP-12E WIFI...
In stock
+ −
Add to wish list
WAVE-23721, L76K Multi-GNSS Module, Supports GPS, BDS, QZSS
US$22.52
L76K Multi-GNSS Module, Supports GPS, BDS, QZSS
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-23459, R800C GSM/GPRS HAT For Raspberry Pi
US$31.62
R800C GSM/GPRS HAT For Raspberry Pi
In stock
+ −
Add to wish list
WAVE-20855-HF, Core1262 HF LoRa Module, SX1262 Chip, Long-Range Communication, Anti-Interference
US$14.51
Core1262 HF LoRa Module, SX1262 Chip, Long-Range Communication, Anti-Interference
In stock
+ −
Add to wish list
WAVE-23597, Rail-mount SX1262 LoRa Data Transfer unit, RS232/RS485/RS422 to LoRa, Suitable for Sub-GHz band
US$40.72
Rail-Mount SX1262 LoRa DTU. RS232 / RS485 / RS422 To LoRa. Suitable for data acquisition in industry and agriculture.
In stock
+ −
Add to wish list
SENS-DS18B20-ESP, Temperature Sensor Wifi IOT Adapter Module DS18B20
US$4.50
ESP8266-DS18B20 Temperature Sensor Wifi IOT Adapter Module DS18B20. This ESP-01/ESP-01S DS18B20 Temperature module based on the ESP8266 and digital...
In stock
+ −
Add to wish list
SENS-DHT22-ESP, Temperature & Humidity Sensor Wifi IOT Module DHT22 for ESP8266
US$12.69

Temperature & Humidity Sensor Wifi IOT Module DHT22.

In stock
+ −
Add to wish list
RM-2-ESP, ESP8266 Wireless Two Channel Relay Breakout Board, 5VDC
US$13.60
ESP8266 Wireless Dual Channel Relay Breakout Board, 5VDC The 12V dual WiFi relay module uses ESP-01 as the WiFi module and is compatible with 8 bit MCU...
In stock
+ −
Add to wish list
RM-1-ESP, ESP8266 Wireless Single Channel Relay Breakout Board, 5VDC
US$9.05
ESP8266 Wireless Single Channel Relay Breakout Board, 5VDC This is a neatly designed board that offers the ability to control a relay using an ESP8266....
In stock
+ −
Add to wish list
LORA-RFM98-915 LoRa Radio Node v2.0 Based on Sx1278 LoRa 915Mhz 2.4G RFM98
US$36.17
The LoRa Radio Node V2.0 based on the ATmega328P and RFM98 433Mhz radio module.
In stock
+ −
Add to wish list
WIFI-ESP8285-WFTX Remote High Precision Temperature Controller ESP8285 WIFI Module
US$27.07

This is a remote WIFI ESP8285 WFTX remote temperature controller.

In stock
+ −
Add to wish list
WAVE-23252 5G DONGLE Module, quad antennas, USB3.1 port, Aluminum Alloy Heatsink, M.2 Key B Interface
US$35.26
Features At A Glance: Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules. Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules. USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network. 4x SMA antenna connectors, easy to install the antenna. Onboard SIM card slot for NANO SIM card.
In stock
+ −
Add to wish list
PSM-349, 200mm Inductive Coil and 10 Wireless LED Kit - 12-24VDC
US$36.35
This Inductive Coil and 10 wireless LED kit uses electromagnetic fields and inductive coupling to pass power through the air to light up SMD LEDs soldered onto coils.
In stock
+ −
Add to wish list
WAVE-23251, SIM8202G-M2 5G HAT for Raspberry Pi, Quad Antennas 5G NSA, multi-band, 5G/4G/3G, with Case
US$445.85
WAVE-23251, SIM8202G-M2 5G HAT for Raspberry Pi, Quad Antennas 5G NSA, multi-band, 5G/4G/3G, with Case
Delivery within 2-3 weeks
+ −
Add to wish list
5140-ADA, Small Inductive Coil and 10 Wireless LED Kit - 5V
US$24.48
5140-ADA, Small Inductive Coil and 10 Wireless LED Kit - 5V
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-22613, SX1303 915M LoRaWAN Gateway Module With HAT for Raspberry Pi, Standard Mini-PCIe Socket, Long Range Transmission
US$172.67
WAVE-22613, SX130x 915M LoRaWAN Gateway Module With HAT for Raspberry Pi, Standard Mini-PCIe Socket, Long Range Transmission
In stock
+ −
Add to wish list
TEL0153, Gravity: UART Fiber Optic Transceiver Module
US$36.35
The TEL0153 is a fibre optic transceiver module. It runs at 2000000 baud at any time within a distance of up to 10km.
In stock
+ −
Add to wish list
DFR0937, 5V Remote Wireless Power Supply Lamp Pack
US$17.06
The DFR0937 is a small kit with LEDs that can be powered without the need for wires, or battery packs!
In stock
+ −
Add to wish list
ESP32-LCDKit, ESP32 series HMI Display Development Board
US$24.52
The ESP32-LCDKit is an HMI development board with the ESP32-DevKitC at its core. It is integrated with such peripherals as SD-Card, DAC-Audio, and can be connected to an external display.
In stock
+ −
Add to wish list
ESP32-CAM-MB, USB Shield for ESP32 Camera Module
US$5.23
The ESP32-CAM-MB is an add-on to our WIFI-ESP32-CAM camera module with a size of 39.8x27mm. This module can work in conjunction with ESP32 and it enables...
In stock
+ −
Add to wish list
WL-JDY-23 Bluetooth 5 Module with Pins
US$6.32
WL-JDY-23 Bluetooth 5 Module with Pins    The JDY-23 Bluetooth 5 Module is transparent transmission module which is based on Bluetooth 5.0 standard...
In stock
+ −
Add to wish list
5445-ADA, WiFi Antenna with w.FL / MHF3 / IPEX3 Connector
US$4.05
The 5445-ADA is a small antenna that supports 2.4GHz WiFi or BLE.
In stock
+ −
Add to wish list
TEL0146, Self-powered Wireless Switch (433Mhz)
US$14.33
The TEL0146 is a self-powered wireless switch. It uses the kinetic energy of the press into electrical energy that is then stored and used to transmit the required signals.
In stock
+ −
Add to wish list
5303-ADA, Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT - 4MB Flash + 2 MB PSRAM
US$36.17
The 5303-ADA is an ESP32-S2 module with 4MB of flash and 2MB of PSRAM. It also has a built-in BME280 Sensor, which detects temperature, humidity and pressure. Hurry! Before this product flies off the shelves!
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-21848 NodeMCU-32-S2-Kit, ESP32-S2 WiFi Development Board, with ESP-12K Module
US$14.51
This is an entry-level development board based on Espressif ESP32-S2 SoC, which is is equipped with Xtensa® 32-bit LX7 single-core processor, operating frequency up to 240 MHz, supports secondary development without using other microcontrollers or processors. The ESP32-S2 has industry-leading low-power performance and RF performance, supports IEEE802.11b / g / n protocol, integrates Wi-Fi MAC, Wi-Fi RF and baseband, RF switch, RF Balun, power amplifier, low noise Amplifier, etc, designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc.
In stock
+ −
Add to wish list
5000-ADA, Adafruit ESP32-S2 Feather - 2 MB PSRAM and STEMMA QT / Qwiic
US$27.25
The 5000-ADA is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.
Delivery within 2-3 weeks
+ −
Add to wish list
DFR0868, Beetle ESP32 - C3 (RISC-V Core Development Board)
US$12.51
The DFR0868 is a controller based on ESP32-C3 RISC-V 32bit single-core processor.  It's mainly intended for IoT applications.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-21446, SIM7600NA-H 4G DONGLE, GNSS Positioning, for North America (all providers)
US$99.87
The WAVE-21446 is a GNSS Positioning Dongle. It features up to 150Mbps downlink rate and 50Mbps uplink rate.
In stock
+ −
Add to wish list
WAVE-21474, Dual-Mode Bluetooth Module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1
US$9.96
The WAVE-21474 is a 5.1 Bluetooth module designed for the Raspberry Pi Pico. It supports SPP and BLE and can be controlled via UART commands.
In stock
+ −
Add to wish list
WAVE-21179, ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi, With LCD and Pinheader
US$22.52
The WAVE-21179 is a wifi development board with compact size and plenty of peripherals. It has an integrated low-power WiFi SoC chip, a built-in LED Display and preinstalled headers for easy installation.
In stock
+ −
Add to wish list
WT32-ETH01 Embedded WiFi Bluetooth-Compatible Ethernet Serial Port Wireless Module Network Combo Serial to Ethernet Module based on ESP32
US$34.08
The WT32-ETH01 is an embedded WiFi Bluetooth-Compatible Ethernet Serial Port Wireless Module Network Combo.
In stock
+ −
Add to wish list
MOD-SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V
US$18.77
Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission....
In stock
+ −
Add to wish list
FIT0872, IPEX to SMA Male Cable (Inner Needle)
US$9.05
The FIT0872 is a gold-plated IPEX to SMA male cable(inner needle) that passed the 48h salt spray test. It's durable and not easy to rust.
In stock
+ −
Add to wish list
LOACDI01 Lora AC Dimmer, 915MHz
US$49.82
An AC Dimmer is used to control the AC cycle. Normally, a dimmer is used to turning the power ON/OFF for lamps or heating elements, it can also be used in fans, pumps, air cleaners, etc. Makerfabs Lora AC Dimmer chopper circuit is based on Triac BT139, and zero-cross checking circuit, it detects the zero-cross points and then the Triac controlled to chop the AC. Besides, to avoid the problem of AC can not be totally shunted off with Triac, a relay is implemented to make the AC totally On/Off. On-board AC/DC module implemented, so no external power supply needed, suitable for field applications.
In stock
+ −
Add to wish list
OAC808GPS35 Maduino Zero SIM808 GPS Tracker V3.5
US$36.17
This V3.5 is the Newest Version of the Maduino Zero SIM808 GPS Tracker. Maduino Zero SIM808 GPS Tracker is an IoT (Internet of things) Solution based on the 32-bit Atmel’s SAMD21 MCU and GPRS/GSM GPS/Bluetooth module SIM808. It integrates a micro Controller ATSAMD21G18, SIM808, power management, and storage, to make the SIM808 GPS Tracker ready for a real project for IoT projects such as smart-home, outdoor monitoring, shared bicycle, etc. The Maduino Zero SIM808 GPS Tracker based on the Arduino, users can program it with Arduino IDE, which is very easy especially suit for the none-programmers.
In stock
+ −
Add to wish list
MAIGSRM Industrial-grade Soil Remote Monitor Sensor, 915MHz
US$90.77
This Industry-grade soil remote monitor intends for these applications of agriculture, it is mainly composed of 2 parts: 1. Remote monitor station with RS485: developed by Makerfabs, it converts the RS485 signal, which is usually used in agricultural field applications, to wireless connections WIFI (if there is) or Lora, or Bluetooth. 2. Industrial-grade Soil Sensor: unlike some other maker-level soil sensors that only output analog voltage that reflects the soil status/changes but not the absolute value, this sensor measures the soil parameters such Temperature/Moisture/PH/Nitrogen/ Phosphorus/Potassium.., with calculated true output, so users can get to know the real soil parameters.
In stock
+ −
Add to wish list
WRL-18034 ESP32-C3 WROOM Module - 4MB (PCB Antenna)
US$5.41
The Espressif ESP32-C3 is the next version of the popular ESP32 Bluetooth® and WiFi enabled module. This module features a single core, RISC-V-based processor with WiFi and Bluetooth LE 5.0 radios built into the SoC. The module features a PCB antenna and castellated plated pins for surface-mount soldering. This variation has 4 MB of on-board SPI flash and is the 85 °C temperature tolerant version.
Delivery within 2-3 weeks
+ −
Add to wish list
TEL0140-2 Gravity: Digital Wireless Switch Kit - Transmit and Receive (433MHz)
US$19.79
This Gravity: Digital Wireless Swtich might be just what you need! Based on 433Mhz RF communication technology, the module includes a transmitter and receiver and features the advantages of simple operation,strong penetration, and ultra-low standby power consumption. It is able to transmit digital signals and compatible with any controller that can read and write digital signals. These modules are used on a wide variety of applications that require wireless control, such as, remote control, wireless doorbell, wireless signal transmission, upgrading wired buttons to wireless buttons, etc.
In stock
+ −
Add to wish list
ANT-9146 Female RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
US$2.27
This RF adapter cable adapts the u.FL connection on an electronics module to an external antenna with a female RP-SMA-K connection. Often times, small electronics save space by using a u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM) on the PCB.
In stock
+ −
Add to wish list
WRL-18583 ESP32-S2 WROOM Module - 4MB (PCB Antenna)
US$5.41
It's best to think of the ESP32-S2 WROOM Module as the next step in the ESP32 WROOM module line. It builds on the benefits of the original ESP32 WROOM Module with new and improved features such as security, display support, and increased environmental performance.
In stock
+ −
Add to wish list
WRL-18567 SparkFun Qwiic WiFi Shield - DA16200
US$27.19
SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped RF filter, 4MB flash memory, and an on-board chip antenna. With the addition of a Qwiic connector, multiple GPIO options, JTAG connectors for deep dive programming, and you've got everything you need to get your R3 layout device ready to set up your next IoT project.
In stock
+ −
Add to wish list
MOD-BL-3.5MM, 3.5mm Wireless Car Bluetooth Audio Receiver Adapter
US$4.46
This is 3.5mm wireless Car Bluetooth audio adapter.
In stock
+ −
Add to wish list
WL-207, 2.4G Wireless Digital Audio Module, Speaker Adapter, RX and TX Modules, 5V
US$45.27

2.4G wireless digital audio module, speaker adapter, RX and TX modules, 5V. Using the latest 2.4G wireless transmission technology, 44.1K sampling rate, 24bit AD sampling lossless high-fidelity digital audio transmission, 16 selectable operating channels. Maximum distance 100 meters open ground.  

In stock
+ −
Add to wish list
ANT-SW915-XP-1M, Sucker Wireless RF Antenna, 915MHz 2.0~3.0dBi
US$7.14
The SW915-XP1M, a small sucker antenna, is specially designed for 915MHz wireless communication. It has good VSWR, ingenious structure, easy installation, stable performance, with good anti-vibration and anti-ageing ability.
In stock
+ −
Add to wish list
FIT0833, IPEX to SMA Female Connector Cable
US$8.50
The FIT0833 is a gold-plated IPEX to SMA female connector that has passed 48 hours salt spray test, which is durable and not easy to rust.
In stock
+ −
Add to wish list
DFR0809, ESP32-C3-MINI-1-N4 Module (PCB antenna)
US$8.87
The DFR0809 is a universal Wi-Fi and low-power Bluetooth LE module. The rich set of peripherals and small size make the two modules an ideal choice for smart homes, industrial automation, health care, consumer electronics, etc.

 
In stock
+ −
Add to wish list
ANT-PANEL 2.4GHz 14dbi Directional Panel Antenna kit for WiFi Router
US$18.15
This outdoor rated 2.4GHz 14dbi Directional Panel Antenna will receive or transmit signals between 1 to 3 miles under normal conditions.
Delivery within 2-3 weeks
+ −
Add to wish list
WRL-12861 Interface Cable - SMA Female to SMA Male (25cm)
WRL-12861-MF-100 Interface Cable - SMA Male to SMA Female (100cm)
US$8.56
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 100cm (39.37") long and has a 50Ω impedance that can handle frequencies up to 17 GHz.
In stock
+ −
Add to wish list
WRL-12861-MM-100 Interface Cable - SMA Male to SMA Male (100cm)
US$11.60
This is a basic SMA (Sub-Miniature A) male to male connector cable. Each cable is 100cm (39.37") long and has a 50Ω impedance that can handle frequencies up to 17 GHz.
In stock
+ −
Add to wish list
WAVE-20182, ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol
US$14.33
The WAVE-20182 is a module designed for the raspberry pi pico that allows you to integrate wifi capabilities into your raspberry pi pico related projects.

 
In stock
+ −
Add to wish list
WAVE-20268, SIM868 GSM/GPRS/GNSS Module for Raspberry Pi Pico, Bluetooth Connection
US$40.72
The WAVE-20268 is a module designed for Raspberry Pi Pico. It allows your raspberry pi pico to access a wide array of multiple communication functions. Such as making phone calls, Bluetooth, 2G, GNSS and so much more.
 
In stock
+ −
Add to wish list
OAC915MLR Maduino Lora Radio, 915MHz
US$27.07
This is a mainboard based on the ATmega328 microchip and Lora Module designed for ultra-long-range, high interference immunity and low rate data transfer. Perfect for IoT projects.
In stock
+ −
Add to wish list
OPES32A9G WIFI+BLE+GPRS+GPS Solution based ESP32 and AI-Thinker A9G
US$35.26
This is an MCU module that allows you to create Wifi/GPRS/GPS/BLE connections with your projects by combining an ESP32 and an A9G shield.
In stock
+ −
Add to wish list
1 2 3 4