Features at a glance:
- Based on Qualcomm platform, support 5G NSA and SA networking, support multi-mode & multi-band
- Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS
- Operating system support: Windows/Linux/Android
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high-speed 5G communication
- Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 / RM5XX series, setting via DIP switches
- Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
- Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable and flexible power supply
- Onboard power supply on/off switch, reset button, and LED indicator, easy to turn on/off the module or monitor the operating status
- 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas
- 2x SIM card slot, dual card single standby, switchable via AT command
- Onboard audio jack and audio decoder, allow audio operation like making a phone call
- High-efficiency power supply circuit, up to 3A output current
Note: The case is only suitable for Raspberry Pi 4B (not included)
Specifications:
5G Standard: 3GPP R16
CHIP: Qualcomm Snapdragon X62
Frequency Band
Sub-6G: n1, n2, n5, n7, n12, n13, n14, n18, n20, n25, n30, n41, n48, n66, n71, n77, n78, n79
LTE-FDD: B1,B2, B4, B5, B7, B12, B13, B14, B17, B18, B19, B25, B26, B29, B30, B66, B71
LTE-TDD: B38, B41, B42, B43, B46, B48
WCDMA: B1, B2, B4, B5, B8
GNSS: GPS, GLONASS, Beidou, Galileo and QZSS
Data Rate
Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL)
LTE: 1 Gbps (DL) / 200 Mbps (UL)
HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL)
Software Functions
Operating Systems: Windows 7/8/10/11, Linux, Android, Raspberry PI OS, OpenWRT
Communication Protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0
Dial Up: RNDIS, NDIS, PPP, MBIM
SMS: Supports MT, MO, CB, Text, PDU
Firmware Upgrade: Supports firmware upgrade via USB port
Hardware Specifications
SIM Card: 1.8V / 2.95V
Antenna: For 3G / 4G / 5G / GNSS, 4 x IPEX-4 connectors
Power Supply: 3.132~4.4V
Form Factor: M.2
Dimensions: 42.0 x 30.0 x 2.3 mm
Operating Temperature: -30℃ ~ +70℃
Applications
Applicable Regions: Americas
Application Examples: CPE, Smart gateway, Drone, Live streaming, Remote medical treatment, Intelligent security
Dimensions:
WARNING
