RM520N-GL 5G HAT for Raspberry Pi with Case, Quad Antennas LTE-A, Global Band, GNSS Positioning, Support 3GPP 16, 4G/3G
Raspberry Pi RM520N-GL 5G HAT
Supports 5G/4G/3G communication and GNSS positioning, Global Band
Based On Quectel RM520N-GL 5G Module, Supports 3GPP 16
Features At A Glance
- Comes with the Quectel RM520N-GL 5G Sub-6GHz module, supports various network standards such as 5G/4G/3G and LTE-A, GNSS positioning support
- Comes with M.2 TO 4G/5G HAT, compatible with the RM500U-CN/RM500Q-GL/RM502Q-AE/RM520N-GL series 5G modules
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano to enable high speed 5G network
- Standard M.2 B KEY slot, compatible with SIM7600X/EM06X/SIM82XX/RM5XX series 4G/5G M.2 modules
- Onboard control pins, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
- Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable and flexible power supply
- Onboard power supply switch, reset button and LED indicator, easy to turn on/off the module and monitor the operating status
- 2x SIM card slot, dual card single standby, switchable via AT command
- High efficiency power supply circuit, up to 3A output current
- Comes with metal case, supports wall and rail mounting, more convenient for installation
Quectel RM520N-GL 5G Global Band Module
Supports 3GPP 5G Release 16 Specification, M.2 Form Factor
Supports 5G/4G/3G Networking, Global Band
Support 5G NSA (4G And 5G Co-Networking) And SA (5G Standalone Networking) Support 4G/3G Network
* the frequency band diagram above is for reference only, please confirm the supported bands according to your local service provider.
Multi-Constellation High-Precision GNSS
Supports GPS, Beidou, Glonass, Galileo, QZSS
Comes With M.2 TO 4G/5G HAT
Compatible With RM500U-CN/RM500Q-GL/RM502Q-AE/RM520N-GL Series 5G Modules, Supports Direct Access To Raspberry Pi 4B/3B+ And CM4-IO-BASE-A/B Baseboards, Etc
What's On Board
- Raspberry Pi GPIO header
for connecting with Raspberry Pi - DIP switches
Enables the power control and reset pins - M.2 slot
Compatible with most SIMCom and QUECTEL 4G/5G modules in M.2 form factor - SIM card slot 1
one of the 2x SIM card slots, dual card single standby - USB3.1 port
USB 2.0 compatible, for connecting with different hosts - USB Type-C port
5V 3A input, stable and flexible power supply - Audio jack
SIM7600X/SIM8XXX series supports audio function, but RM5XX/EM06XX series temporarily does not support this function
- Antenna connector
Supports quad antennas - Reset button
- Power supply switch
Switch the power supply mode:
When set to USB, the module is powered via the "5. USB3.1 port"
When set to EXT PWR, the module is powered by the external power supply via the "6. USB Type-C port" - Cooling fan
Better heat dissipation for both Raspberry Pi and the 5G module - Indicator
Easy to monitor the operating status of module
- Cooling fan
Better heat dissipation for both Raspberry Pi and the 5G module - SIM card slot 2
Switchable via AT command - Module settings switch
Switch A to ON for SIM7600X/A7906X/SIM7906X/SIM7912X series 4G M.2 modules;
Switch B to ON for SIM8202X/SIM8200EA/SIM8262X series 5G M.2 modules;
Switch C to ON for RM50X/RM520N-GL/EM06X series 5G/LTE-A M.2 modules
- USB 2.0 interface pads
- NAU8810X Audio Chip
For SIM7600X/SIM8XXX series modules, RM5XX and EM06XX series modules temporarily does not support this function - Fan Header
5V cooling fan power supply
Multi System Support, Easy To Use
Supports Windows 7/8/10/11, Ubuntu, Raspberry Pi OS, OpenWRT...Just Plug It Into USB Port, Go Through Some Simple Configuration, The High Speed 5G Network Connection Will Be Ready To Use
Connecting To Raspberry Pi
Metal Case, Rugged And Nice-Looking, Easy To Install
Supports Wall And Rail Mounting, Convenient For Various Application Scenarios Such As Industry
*Note: The case is only suitable for Raspberry Pi 4B*
Application Examples
More Possibilities
Outline Dimensions
Resources & Services
WARNING
