WAVE-27698, PCIe to M.2 4G/5G And USB 3.2 HAT for Raspberry Pi 5, Compatible with SIMCom/Quectel 4G/5G modules, Raspberry Pi 5 HAT, High-speed Networking
PCIe TO M.2 4G/5G And USB3.2 HAT
Suitable for Raspberry Pi 5
Compatible with Multiple SIMCom/Quectel 4G/5G Modules with M.2 Key B Interface
Features At A Glance
- Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion
- Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
- Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages
- Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
- Onboard power monitoring chip for real-time measurement of voltage, current and power
- Onboard SIM card slot for NANO-SIM card
- Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status
- Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation
- Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
Designed for Raspberry Pi 5, HAT+ Standard
Onboard PCIe Interface for directly connecting to Raspberry Pi 5 via 16pin cable
More USB Capability for Raspberry Pi 5
Extends the PCIe Interface to 3x High Speed USB 3.2 Gen1 Ports for connecting more peripherals
Compatible with Multiple SIMCom/Quectel 4G/5G Modules with M.2 Key B Interface
Onboard M.2(NGFF) Key B Slot, Tested to support SIM7600XX-M.2, SIM82XX and RM5XX Series Modules, Compatible with 3042/3052 Packages
Multi-System Support
Supports systems such as Raspberry Pi OS, Ubuntu, OpenWRT, Etc.
Raspberry Pi OS
OpenWRT
Ubuntu
Comes with 5G-4IN1-PCB Antenna
Supports top and bottom mounting, easy to install, good communication effect
Install on the Bottom / Install on the Top
Onboard Power Monitoring Chip and EEPROM
For real-time monitoring voltage, current and power of module via I2C, supports saving HAT+ ID and product information, compatible with HAT+ standard
Reserved Airflow Vent For Cooling Fan
More airflow for Pi5, faster cooling effect, more stable operation
What's On Board
- VL805
PCIe to USB 3.2 Gen1 HUB chip - EEPROM
for saving HAT ID and product information - INA219
Power monitoring chip - 16PIN PCIe interface
for connecting to the PCIe interface of Raspberry Pi 5 - M.2(NGFF) Key B slot
Compatible with 3042/3052 packages M.2 4G/5G modules - Raspberry Pi GPIO header
for connecting Raspberry Pi 5 - USB 3.2 Gen1 expanded ports
USB1~USB3
- Nano SIM card slot
for installing Nano-SIM card - Type-C interface
for 4G/5G networking of Raspberry Pi or PC via USB cable, firmware updating, or external power supply input - DIP switch
for switching to use GPIO pins to control power on/off and reset of the module - Reset button
Press it to reset the module - PWR indicator
Power indicator - NET indicator
Module Network status indicator
GND: Ground
P5: Module PWR pin for module power ON/OFF control
P6: Module RST pin for module reset and restart control
WARNING
