Battery Chargers/Testers

US$6.93
Simply lift the swivel arm and place the battery between the contacts and it will provide you a voltage measurement of your batteries. It can test AAA, AA, C, D, 9V, and button cell batteries.
In stock
+
Add to wish list

US$13.59

Clearly marks how much power is left in your batteries, so you don't have to guess and mix old batteries with new ones. Features: For use with AAA, AA, C, D, E-block (9V), CR123A, CR2, CR-V3, 2CR5,CR-P2 and button cell batteries. Battery status indicated on LCD display. Designed for use with standard, Lithium-Ion and rechargeable batteries.

In stock
+
Add to wish list

US$15.88
The LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries.
In stock
+
Add to wish list

US$14.58
It is designed to charge single-cell Li-Ion or Li-Polymer batteries. The board incorporates a charging circuit, status LED, connector for your battery (JST-type used in the batteries we carry), and a mini-USB connector.
In stock
+
Add to wish list

US$19.25
This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833 device. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up.
In stock
+
Add to wish list

US$20.93
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. 
In stock
+
Add to wish list

US$10.42
Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on.
In stock
+
Add to wish list

US$26.95
NOTE: This product is only designed for use with solar panels sold at the Adafruit store. We cannot guarantee this will work with solar panels purchased elsewhere. This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers. 
In stock
+
Add to wish list

US$12.17
This little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MiniUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. 
In stock
+
Add to wish list

US$12.17
This little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MicroUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end.
Delivery within 2-3 weeks
+
Add to wish list

US$26.17
This is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.
Delivery within 2-3 weeks
+
Add to wish list

US$9.53
Ideally, this backpack is for use with the 3.3V Pro Trinket, so that the battery voltage (3.7V-4.2V) will get regulated down to 3.3V on the Pro Trinket board. However, many times, you can run a 5V Pro Trinket + accessories off of the ~4V from the LiPoly battery with no problem.
In stock
+
Add to wish list

US$34.92
PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.
Delivery within 2-3 weeks
+
Add to wish list

US$13.94
When you plug the 18650 battery into the charger, it will show Red LED Light, and Green means in full charging condition.
In stock
+
Add to wish list

US$16.99
Charging slots is capable of monitoring and charging batteries independently. Additionally, yellow and red power/charging status indicator lights could visibly indicate battery status and charging process. It's as simple as insert, detect and charge.
In stock
+
Add to wish list

US$57.10
It is a very advanced smart charger for your LiPo/LiFe, NiCd and NiMH Batteries, capable of  managing 6S Li-ion/LiPo/LiFe and 15S NiCd/NiMH. The Display and straightforward controls make charging high volatile batteries safe and easy.
In stock
+
Add to wish list

US$6.72
This device is a game changer, portable, small and comes with integrated protection features like over charge/over current cut off and indicators. The input of this device is a micro USB female socket and can be connected directly to a mobile charger, whereas the output you can connect a lithium battery as the output.
In stock
+
Add to wish list

US$6.65
Those small modules are made to prevent Lithium-Polymer (LiPo) batteries to lose too much power and get damaged. Six LEDs show you which battery has enough charge and which don’t, and a loud (95dB) alarm starts as soon as one of the batteries attached gets under 3.3V.
In stock
+
Add to wish list

US$11.19
If you ever wanted to find out what the voltage was on your LiPo battery, this little device can measure the voltage and readout the value to indicate when the voltage for a cell is past a setting that you may have set it to. LiPo batteries are happy around 3.7v to 3.2v any lower and it can often never recharge again, any higher and it could be affected by reducing the lifespan of the battery. The speaker will sound when the voltage is too low, offering a reminder to charge the battery.
In stock
+
Add to wish list

US$3.49
It is an Asynchronous 5 single cell Lithium Polymer Charger. You can charge together 5 LiPo batteries at the same time that have a Molex 2 pin connector with a max capacity of 750mAh. 
In stock
+
Add to wish list

US$18.13
Instead of fumbling around for connectors to attach to your charging station, this cable makes it easy and simple to connect your battery. From one end it offers the 3.5mm Bullet connector that connects into your charging station. The other end offers 8 connectors that you can only connect 1 battery at a time to charge. Do not connect two or more batteries at the same time or it will short circuit.
In stock
+
Add to wish list

US$19.95
This compact device is a balance charger that can safely charge any 7.4v or 11.1v LiPo batteries. The system will shine a green light to indicate fully charged or a red light to indicate charging in process. There are two ports allowing users to connect either a 2 cell or 3 cell balance charger connector. The device can charge each cell at a rate of 800mA and operates from 110-240VAC.
In stock
+
Add to wish list

US$29.95
Features: Charges all cylindrical 3.6/3.7V Li-Ion Batteries. Innovative Tachometer Display. Displays actual charging Current. Displays each individual battery Voltage. Displays each individual battery charged Capacity in mAH. Charge anywhere with 5 Volt USB power including PC USB, wall adapters, cell phone chargers, solar panels, power banks, etc. 0V activation function can rescue your over-discharged batteries. Bad batteries detected in 10 minutes by “null” display. Screen flashes 3 times every 10 seconds when your batteries are fully charged.
In stock
+
Add to wish list

US$15.45
In many applications, we will use lithium batteries as our power solutions. In this kind of application, the most two important things are the power boost and battery charger. These two points are a prerequisite for the system. The traditional power boost and battery charge circuit are usually divided into two separate parts, the circuit will be relatively cumbersome to build.
In stock
+
Add to wish list

US$19.95
This excellent charger has 4 independent charging slots with LCD display of charging state of each battery. The charger can also optimize and test the maximum capacity of the rechargeable batteries. Intelligent chip controls the charging process with automatic transfer to trickle-charging mode. Identifies and will not charge non-rechargeable batteries, short-circuited batteries or defective batteries. Has a battery revival function to activate and repair marginal batteries. When the batteries are fully charged, the Auto Power Off function cuts off the power supply automatically.
In stock
+
Add to wish list

US$18.15
This is a useful inexpensive tester for car battery state, alternator state as well as OK to charge battery state. Has a 6-LED display that clearly presents the alternator and battery states. Large insulated ground battery clamp and needle test tip makes it easy to use. Compact and light weight, easily can be kept in car. Suitable for 12V lead acid batteries, hardtop batteries, discharge batteries and maintenance free batteries.
In stock
+
Add to wish list

US$9.09
Still using a big, bulky, traditional power adapter to charge your lithium battery? DFRobot provides you with a compact and efficient 7.4V lithium battery USB charger, only the size and weight of an ordinary Gravity sensor. With just a mobile phone AC adapter (or power bank) and an Android data cable, you can safely and efficiently charge the 7.4V lithium battery up to 1A, which commonly used in various robots and motor drivers. The light-weight and micro USB interface features make it ideal for outdoor applications. In addition to serve as a charger, it can also be embedded in a variety of 7.4V lithium battery-powered projects, adding a USB charging function to it, eliminating the need for battery swapping and the use of traditional bulky power adapters.
In stock
+
Add to wish list

US$9.94
This charger is capable of charging one or two 9V style LIPO/NI-MH/ NICD batteries. It can provide a maximum of 1A current output and is programmed to cut off or lower current when required.
In stock
+
Add to wish list

US$18.75
3.7V lithium batteries are commonly used in many projects. However, the remaining power and voltage of the lithium battery are highly nonlinear. We can only roughly judge whether the battery is full or almost empty according to its voltage. The Gravity I2C 3.7V Lithium Battery Fuel Gauge employs Gravity I2C interface, ultra-low operating current, and real-time tracking of the relative state of charge (SOC) of the battery through Maxim's patented algorithm, eliminating the need for full-to-empty relearning and offset accumulation errors. Plug and play to accurately measure the voltage and remaining power of the battery. The module also features as a low battery power alert interrupt function. When the battery power falls below specified threshold, the ALR pin generates a falling pulse to trigger the external interrupt of the controller.
In stock
+
Add to wish list

US$1.25

This tiny blue board is what you usually find in power banks. This board allows the user to charge their battery system using the USB female port and MicroUSB works as the discharging port. The battery is connected from the top pads on the bottom which indicate B+ and B-. To be safe, you can use the battery holder for the 18650s and solder the wires to the board.

In stock
+
Add to wish list

US$3.41
Connect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power shown by the indicated bars.
In stock
+
Add to wish list

US$2.79
Connect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power shown by the indicated bars.
In stock
+
Add to wish list

US$2.79
Connect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power shown by the indicated bars.
In stock
+
Add to wish list

US$2.79
Connect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power shown by the indicated bars.
In stock
+
Add to wish list

US$11.94
12-24VDC Charging Control Protection Module for Solar Panels/Lithium Batteries with LED Display and Real-Time Voltage Monitor This little charge...
In stock
+
Add to wish list

US$8.78
This module allows you to set two threshold points to charge your battery packs.
In stock
+
Add to wish list

US$19.79
This is a 30 Amp programmable battery charger that automatically controls battery charging and discharging. It can charge Lead Acid and rechargeable batteries rated from 6-48VDC.
In stock
+
Add to wish list

US$8.14
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge upto 12.6VDC LiPo battery at a rate of 25A max. Check the specs below to see if it will work with your battery.
In stock
+
Add to wish list

US$5.59
This Charger is designed to charge 6 JST-DS or 51005 molex connector based Li Po batteries. This charger can output a maximum of 350mAh shared on all six ports.
In stock
+
Add to wish list

US$13.99
This battery tester can measure the voltage and charge on LiPo, LiFe, Li-Lon, NiCd, and NiMh batteries.
In stock
+
Add to wish list

US$17.99
This is a high-quality T-plug charger board that supports parallel charging of 6 XT60 plug Lipo batteries at once.
In stock
+
Add to wish list

US$17.99
This is a high-quality T-plug charger board that supports parallel charging of 6 T plug Lipo batteries at once.
In stock
+
Add to wish list

US$3.49

This Adapter Plug Cable with LED Indicator is used for Remote Control Toys, Household Appliances, Power Tools.

In stock
+
Add to wish list

US$5.45
3S 11.1V 10A Lithium Battery Protection Board (AOD403+8254AA) This is a 10A 3 Cell or 3S (11.1V) Lithium Battery Protection circuit board. The maximum...
In stock
+
Add to wish list

US$4.54
This is a protection circuit board for 18650, Li-ion, Li-Po and other similar batteries.
In stock
+
Add to wish list

US$7.27
This device is a game-changer, portable, small and comes with integrated protection features like overcharge/over-current cut off and indicators.
In stock
+
Add to wish list

US$7.27
This device is a game-changer, portable, small and comes with integrated protection features like overcharge/over-current cut off and indicators.
In stock
+
Add to wish list

US$90.95
The SkyRC iMAX B6AC V2 can charge and discharge NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries with individual cell balancing for up to 6 lithium cells. It features a built-in adapter that can be powered from 100 V to 240 V AC, or it can alternatively be powered via an 11 V to 18 V DC input. With its versatile charging capabilities, PC control software, and advanced features like input power monitoring, delta-peak sensitivity, cyclic charging and discharging, and more, the iMAX B6AC V2 is a great addition to the workbench of any RC, DIY, or robot enthusiast.
In stock
+
Add to wish list

US$4.00
This device is a game changer, portable, small and comes with integrated protection features like over charge/over current cut off and indicators. The input of this device is a micro USB female socket and can be connected directly to a mobile charger, whereas the output you can connect a lithium battery as the output.
In stock
+
Add to wish list

US$6.36
This is a rechargeable Battery 3.7V USB Charger for 26650, 18650, 16340, 14500, 10400.
In stock
+
Add to wish list

US$14.51
12.6V 5A Lithium Battery Charger with DC connector This power adapter is specifically made for charging 12.6V Li-Ion battery packs used in scooter,...
In stock
+
Add to wish list

US$21.79
29.4V 3A Lithium Battery Charger with DC connector This power adapter is specifically made for charging 12.6V Li-Ion battery packs used in scooter,...
In stock
+
Add to wish list

US$3.63
This 2S car battery indicator board lithium battery pack power indicator is a Ultra-thin Electricity display with 5 LED indicators. 2S lithium 7.4V...
In stock
+
Add to wish list

US$3.63
This 3S car battery indicator board lithium battery pack power indicator is a Ultra-thin Electricity display with 5 LED indicators. 3S lithium 12V...
In stock
+
Add to wish list

US$3.63
This 4S car battery indicator board lithium battery pack power indicator is a Ultra-thin Electricity display with 5 LED indicators. 4S lithium 14.8V...
In stock
+
Add to wish list

US$18.15
This IP5328P Dual USB 18650 Battery Charger treasure Type-c 3.7V to 5V 9V 12V Step up Fast Quick Charger Circuit Board QC2.0 QC3.0 is a fast charge power management SOC.
In stock
+
Add to wish list

US$4.54
This module has high precision voltage detection function for each battery. Features:  High-precision voltage detection function for each...
In stock
+
Add to wish list

US$15.42
This is a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. Description:  This MPPT solar charger provide you with...
In stock
+
Add to wish list

US$16.33
  • Longer service life.
  • Touch switch button, perfect feel.
  • Dual IC integrated circuit control, more stable.
  • The product is suitable for lead-acid 12V, 24V, 36V, 48V (8-70V).
  • The product is suitable for 3.7V lithium series multi-platform, 2 string, 3 string, 4 string, 5 string, 6 string, 7 string and 8 string 9 string 10 string 11 string 12 string 13 string 14 string 15 string.
In stock
+
Add to wish list

US$9.75

The DFR0849 is a 2 way buck fast-charging module that integrates the common 5V charging recognition function, it can save a lot charging time by triggering the peak current via fast charging protocol.

In stock
+
Add to wish list

US$13.50

The DFR0852 is a 4 USB buck fast-charging module integrates the common 5V charging recognition function, this module can save a lot of charging time by triggering the peak current via fast charging protocol.

In stock
+
Add to wish list

US$43.75
The FIT0814 is a portable multi-use USB colour screen tester. It can monitor voltage, current, power, capacity, curve waveform, etc. in real-time.
 
In stock
+
Add to wish list

US$6.32

This product is a 2 channel fast-charging module able to detect the voltage and current input to adjust the output up to 24W. It also comes with an array of protective features to protect your electronics.


 
In stock
+
Add to wish list

US$15.24
This product is a 4 channel fast-charging module able to detect the voltage and current input to adjust the output up to 24W. It also comes with an array of protective features to protect your electronics.

 
In stock
+
Add to wish list

US$36.35
HA01 24V Lead Acid Battery Balancer This battery equaliser is used when you when have two or more 12V batteries connected in series. It is used to keep...
In stock
+
Add to wish list

US$8.14
This battery tester is safe and easy to operate, has multiple functions: Alternator State Check, Battery State Check, Check before charge and overload....
In stock
+
Add to wish list

US$9.05

This device is a digital bargraph LCD display battery tester for multiple types of batteries.

In stock
+
Add to wish list

US$16.33
This 2 ampere power adapter is specifically made for charging Li-Ion battery packs used in scooter, mopeds and other battery-powered objects. Battery Charger with 3 pin inline female connector.
In stock
+
Add to wish list

US$16.33
This 2 ampere power adapter is specifically made for charging Li-Ion battery packs used in scooter, mopeds and other battery-powered objects. Battery Charger with 3 pin inline female connector.
In stock
+
Add to wish list

US$8.87

This is a 4S power range rated lithium-ion 18650 battery management system pack protection board which operates up to 30 amperes of current at 14.8 volts, used for Over charge protection, over discharge protection function, short circuit protection
function, over current protection function, balance.

In stock
+
Add to wish list

US$40.72
This module can help you maintain the capacity of your Li-Po/Li-Ion/Li-Fe/NiCd/NiMH batteries, it also enables you to test your servo motors. Features:...
In stock
+
Add to wish list

US$8.87
The FIT0869 is a battery charger that allows you to easily gang three 18650 battery cells together to create a rechargeable battery pack.
In stock
+
Add to wish list

US$1.81
This device is a game changer, portable, small and comes with integrated protection features like over charge/over current cut off and indicators. The input of this device is a micro USB female socket and can be connected directly to a mobile charger, whereas the output you can connect a lithium battery as the output.
In stock
+
Add to wish list

US$2.68
The BAT-C-TP5100 is a 2 ampere battery charger protection module with single and double sections 4.2V 1S and 8.4V 2S.
Delivery within 2-3 weeks
+
Add to wish list

US$4.50
The 5383-ADA is a small Li-po and Li-ion battery meter. It has a very simplistic design and is easy to install on any battery.
In stock
+
Add to wish list

US$7.23
This BMS protection module offers maximum protection for the batteries, the charger and the most important devices. This security card has a combination of discharge protection, overcurrent protection, overload protection and short-circuit protection.
BMS Protection Board Module For 6S Pack 18650 Li-ion Lithium Battery Charger Cells, 24V 15A
In stock
+
Add to wish list

US$36.35
Li-Ion/Polymer Battery Charger/Balancer - 80W, 5A This charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. It...
In stock
+
Add to wish list

US$6.32
BAT-C-4S-BMS Battery Charger Board BMS 7A, 14.8V, 18650 Li-ion Lithium Specifications:  
In stock
+
Add to wish list

US$3.59
This is an 8 ampere BMS Li-ion battery charger 2S, 8.4V for 18650 battery.
In stock
+
Add to wish list

US$4.05
This is a 1S Battery Capacity LED Indicator Module 1S Li-ion 3.7V for 18650 battery
In stock
+
Add to wish list

US$4.05
This is a 2S Battery Capacity LED Indicator Module 2S Li-ion 7.4V maximum for 18650 batteries.
In stock
+
Add to wish list

US$4.05
This is a 3S Battery Capacity LED Indicator Module 3S Li-ion 11.1V maximum for 18650 batteries.
In stock
+
Add to wish list

US$4.05
This is a 4S Battery Capacity LED Indicator Module 4S Li-ion 14.8V maximum for 18650 batteries.
In stock
+
Add to wish list

US$1.77
This BMS protection module offers maximum protection for the batteries, the charger and the most important devices. This security card has a combination of discharge protection, overcurrent protection, overload protection and short-circuit protection.
BMS Protection Board Module For 6S Pack 18650 Li-ion Lithium Battery Charger Cells, 24V 15A
In stock
+
Add to wish list

US$17.97
This battery voltmeter can be used for testing battery voltage and capacity for motorcycle, golf cart, automotive, marine, RV, boat, etc. Compatible for LiPo, LiFe, Li-Lon, NiCd, and NiMh batteries.
In stock
+
Add to wish list

US$7.23
This battery charger protection board is designed for 5 series Li-ion batteries which operates at 15A, for high performance, reliable, stable and long...
In stock
+
Add to wish list

US$5.41
7.4V LiPo USB Battery Charger The internal is equipped with a charging indicator, the charging output is equipped with reverse insertion protection,...
In stock
+
Add to wish list

US$9.05
3.2V 3S-5S BMS Li-ion LMO LiFePO4 Ternary Lithium Battery Balance Charger with Protection Circuit This protection board supports 3s, 4s, 5s, in...
In stock
+
Add to wish list

US$9.05
3.7V 3S-5S BMS Li-ion LMO LiFePO4 Ternary Lithium Battery Balance Charger with Protection Circuit This protection board supports 3s, 4s, 5s, in...
In stock
+
Add to wish list

US$3.49
This BMS protection module offers maximum protection for the batteries, the charger and the most important devices. This security card has a combination of discharge protection, overcurrent protection, overload protection and short-circuit protection.
BMS Protection Board Module For 1S 18650 Li-ion Lithium Battery Charger Cells, 3.7-4.2V
In stock
+
Add to wish list

US$15.24

This is a USB port 3S LIPO Battery Pack Charger, 11.1V- 800mA

In stock
+
Add to wish list

US$14.06
BAT-CHARGER-16 Smart 8-slot USB Charger AA/AAA Batteries
In stock
+
Add to wish list

US$72.75
The Hantek HT2018B is a battery tester specially designed for lead-acid automotive batteries. It can provide the working condition of a storage battery through test starting process, charging process and electrical load process, then analyze life state of lead-acid battery rapidly and accurately.
In stock
+
Add to wish list

US$8.87
Cell Coin Battery Capacity Tester FOR LR44, CR2032, CR2025.
In stock
+
Add to wish list

US$27.07
Mini UPS expansion board for easy soldering or integration into mobile robots and industrial control equipments. I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time. Onboard multiple function pins, provides two charging and discharging methods via pads and pin headers. Multiple battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable.
In stock
+
Add to wish list

US$58.92
The iMAX B6AC V2 can charge and discharge NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries with individual cell balancing for up to 6 lithium cells. It features a built-in adapter that can be powered from 100 V to 240 V AC, or it can alternatively be powered via an 11 V to 18 V DC input.
In stock
+
Add to wish list

US$7.96
QC3.0 QC2.0 Single USB Type-C Mobile Phone Quick Charge Adapter, DC7.1V-32V 3A 30W, Step Down Module.
In stock
+
Add to wish list

US$9.05
QC3.0 QC2.0 Single USB Type-C Mobile Phone Quick Charge Adapter, DC7.1V-32V 3A 30W, Step Down Module.
In stock
+
Add to wish list

US$8.87
QC3.0 QC2.0 Single USB Type-C Mobile Phone Quick Charge Adapter, DC7.1V-32V 3A 30W, Step Down Module.
In stock
+
Add to wish list

US$4.50

TEC4056 TP4056 Charger Module Micro-USB 18650 4.2V lithium battery charger Non-Protection Board Module.

In stock
+
Add to wish list

US$11.60

3V-36VDC Automotive Voltage Circuit Probe Tester Pen.

 

In stock
+
Add to wish list

US$8.87
12-36VDC Lithium Battery Undervoltage Protection Board Low Voltage Over-Discharge Auto Disconnect Cut Off Power Protect with LED Display
In stock
+
Add to wish list

US$16.24
7-80VDC Battery Discharge Undervoltage Protection Module with LED Display
In stock
+
Add to wish list

US$7.96

This Lithium and lead-acid battery tester performs external load capacity tests of the battery as well as other tests, 18650 tools, single function, by controlling the load off and obtaining real-time integrated discharge current capacity results.

In stock
+
Add to wish list

US$12.51
This BMS protection module offers maximum protection for the batteries, the charger and the most important devices. This security card has a combination of discharge protection, overcurrent protection, overload protection and short-circuit protection.
BMS Protection Board Module For 7S Pack 18650 Li-ion Lithium Battery Charger Cells, 24V 25A
In stock
+
Add to wish list

US$9.05
BT-170 Aneng 12V Digital Battery Tester, range 9-24Volt, with Alligator Clips
In stock
+
Add to wish list

US$9.96

This device is a digital LCD display battery tester for multiple types of batteries.

In stock
+
Add to wish list