HT2018B Lead Acid Battery Tester & Analyzer 6V~24V LCD Display.
The Hantek HT2018B is a battery tester specially designed for lead-acid automotive batteries. It can provide the working condition of a storage battery through test starting process, charging process and electrical load process, then analyze life state of lead-acid battery rapidly and accurately.
Features
- Test carload state directly.
- Test car starting voltage.
- Test car charging voltage normally or not.
- Low frequency signal testing without external large load discharge test.
- Easy to read electrical capacity and physical condition to estimate lifecycle.
- Direct detection on the car without removing the battery.
- Rapidly and accurately display the result of battery test.
- Continuous operation, fully protected overvoltage, and reverse connection protection.
- No electricity, no spark, no operating danger.
- Battery test: cold starting current, battery internal resistance and voltage, lifecycle analysis.
- Starting test: battery changing status during system starting.
- System test: output state during charging system working.
- Maximum load test: battery maximum load state.
|
Function Battery test specification |
Range |
Model |
|
|
HT2018B |
|||
|
Cold Starting Current |
CCA |
100~1700 |
√ |
|
IEC |
100~1000 |
√ |
|
|
EN |
100~1700 |
√ |
|
|
DIN |
100~1000 |
√ |
|
|
JIS |
100~1700 |
√ |
|
|
Battery Internal Resistance |
0.00mΩ~99.99mΩ |
√ |
|
|
Battery Voltage |
4.5V~30V |
√ |
|
|
Printing |
× |
||
|
Test Batteries |
6V.12V.24V |
√ |
|
|
Starting Load Test |
√ |
||
|
Charging System Test |
√ |
||
|
Electric Load Test |
√ |
||
|
Reverse Connection Protection |
√ |
||
|
Lattice LCD Display |
√ |
||
|
Cable Length |
600mm |
||
|
Dimension |
143×77×28(mm) |
||
|
Weight |
270g |
||
WARNING
