7-80VDC Lithium Battery Discharge Undervoltage Protection Module with LED Display .
Specifications:
Supply voltage: DC7-80V
Control voltage: equal to the input voltage
Control accuracy: 0.1V
Power consumption: <1.5W
Scope of application: battery lithium battery
Size: 79*55*19mm
Instructions for use:
Power-on display battery voltage: short press SET key to display PO
PO: Short press the +/- key to enter the menu item (PO~P5)
(PO~P5): Short press SET to display parameters -> press +/- keys to adjust parameter values
After setting the parameters, wait for 5S, automatically save the parameters, and return to the display voltage interface
Energy-saving mode: press any button to exit
Factory restoration: press and hold the "+ key" and "-key" at the same time for 3S, display 888, restore factory
PO: set voltage protection value
Default 11V; range 8-80V
P1: How many volts does the voltage rise after the power is turned off and start again
Default 1V; range 0.1-10V
P2: Low pressure alarm value
Default 10V; range 7-70V
P3: Restart interval time after power failure
The default is 2 minutes; the range is 0-10 minutes
P4: Set power-on forced start time
Default 3S; range 0-5S
P5: Rest screen time
Default AA; range 15-30S; AA is always on.
WARNING
