Our Brands

Development Boards

1 - 8
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
10 - 24
Newest Items First
64 Per Page
410-316 Nexys Video Artix-7 FPGA: Trainer Board for Multimedia Applications
US$1,156.75
The Nexys Video is a powerful platform for audio/video applications. Built around the Artix®-7 XC7A200T, the most powerful chip from the Xilinx® Artix-7 FPGA family, the Nexys Video has all the performance and FPGA real estate needed for high-bandwidth and low-latency A/V processing. Utilizing A/V signals is made easy with an on-board Mini DisplayPort, three high-speed digital video ports, and a 24-bit audio codec. One can conveniently scale their design with Ethernet, UART, and USB interfaces and integrate it into larger systems. There is no limit to customizability with the 160-pin FMC LPC connector and four additional Pmod ports.
Delivery within 2-3 weeks
+ −
Add to wish list
410-308 JTAG-SMT2-NC: Surface-mount Programming Module
US$60.74
The JTAG-SMT2-NC uses a 3.3V main power supply and a separate Vref supply to drive the JTAG signals. All JTAG signals use high-speed 24mA three-state buffers that allow signal voltages from 1.8V to 5V and bus speeds of up to 30 MBit/sec. The JTAG bus can be shared with other devices, as systems hold JTAG signals at high-impedance, except when actively driven during programming. The SMT2 module is CE-certified and fully compliant with EU RoHS and REACH directives.
In stock
+ −
Add to wish list
410-319 Arty A7: Artix-7 FPGA Development Board (Arty A7-35T)
US$222.60
The Arty A7 is a ready-to-use development platform designed around the Xilinx Artix-7 FPGA family. With the Artix-7 devices, the Arty A7 board provides the highest performance-per-watt fabric, transceiver line rates, DSP processing, and AMS integration in the Arty family. With the MicroBlaze Soft Processor Core from Xilinx, you can create embedded applications with a variety of peripherals, memory, and interfaces. The Arty A7 is supported by Xilinx's Vivado Design Suite, including the free WebPACK version. You can also leverage the Vitis Core Development Kit or Xilinx Software Development Kit to start developing for the MicroBlaze processor with no prior FPGA experience.
Delivery within 2-3 weeks
+ −
Add to wish list
410-319-1 Arty A7: Artix-7 FPGA Development Board (Arty A7-100T)
US$366.19
The Arty A7 is a ready-to-use development platform designed around the Xilinx Artix-7 FPGA family. With the Artix-7 devices, the Arty A7 board provides the highest performance-per-watt fabric, transceiver line rates, DSP processing, and AMS integration in the Arty family. With the MicroBlaze Soft Processor Core from Xilinx, you can create embedded applications with a variety of peripherals, memory, and interfaces. The Arty A7 is supported by Xilinx's Vivado Design Suite, including the free WebPACK version. You can also leverage the Vitis Core Development Kit or Xilinx Software Development Kit to start developing for the MicroBlaze processor with no prior FPGA experience.
Delivery within 2-3 weeks
+ −
Add to wish list
410-394 ADP3450 Analog Discovery Pro 3000 Series: Portable High Resolution Mixed Signal Oscilloscopes
US$1,813.00
The ADP3450 and ADP3250 are the first in the line of Analog Discovery Pro devices and take the analog and digital instruments from the internationally popular Analog Discovery and turn up key functionalities to meet the growing need for professional-level home electronics test benches. At the heart of each device is a four or two channel high-resolution oscilloscope, offering 14-bit resolution at up to 0.5 GS/s. Additionally, to meet the needs of an increasingly digital world, 16 dedicated digital channels make the Analog Discovery Pro a true mixed signal oscilloscope. With the included digital power supply, digital outputs, two channel arbitrary waveform generator, and two dedicated external triggers the Analog Discovery Pro comes with 12 instruments ready to analyze mixed signal systems through our free software, WaveForms.
Delivery within 2-3 weeks
+ −
Add to wish list
410-299 JTAG-HS3 Programming Cable
US$72.66
The JTAG-HS3 is an affordable high-speed Xilinx® FPGA programming solution. The HS3 builds on the successful JTAG-HS1 by adding an open-drain buffer to pin 14 allowing for the debugging of Xilinx Zynq-SOC processors. It can be attached to target boards using Xilinx's 2x7 connector*, and is compatible with all Xilinx tools, including iMPACT™, ChipScope™, and EDK.
In stock
+ −
Add to wish list
410-300 Genesys 2 Kintex-7 FPGA Development Board
US$1,237.28
The Genesys 2 is a high-performance, ready-to-use FPGA development board built around the Xilinx Kintex-7 FPGA. The Genesys 2 is a powerhouse for data and video processing applications, but offers a variety of peripherals making it a great solution for a wide array of projects. Everything needed for robust multimedia applications is already available on the board: DisplayPort connectors, HDMI sink and source, 16-bit VGA, 128x32 pixel OLED screen, and an audio codec with four 3.5mm jacks. One can quickly get started with A/V, image processing, or other multimedia applications without needing additional hardware.
Delivery within 2-3 weeks
+ −
Add to wish list
471-015 Zybo Z7: Zynq-7000 ARM/FPGA SoC Development Board Zybo Z7-20 with SDSoC Voucher
US$644.18
The Zybo Z7 is a ready-to-use embedded software and digital circuit development board built around the Xilinx Zynq™-7000 family. The Zynq-7000 tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. A rich set of multimedia and connectivity peripherals make the Zybo Z7 a formidable single-board computer. A MIPI CSI-2 compatible Pcam connector, HDMI input, HDMI output, and high DDR3L bandwidth establish the Zybo Z7 as an affordable, yet capable, solution for high-end embedded vision applications. Attaching additional hardware is made easy by the Zybo Z7's Pmod connectors, allowing access to Digilent's catalog of over 70 Pmod peripheral boards, including motor controllers, sensors, displays, and more.
Delivery within 2-3 weeks
+ −
Add to wish list
410-248 ZedBoard Zynq-7000 ARM/FPGA SoC Development Board
US$824.60
The ZedBoard is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC (APSoC). Take advantage of the Zynq-7000 APSoCs tightly coupled ARM® processing system and 7-Series programmable logic to create unique and powerful designs with the ZedBoard. This board contains everything necessary to create a Linux®, Android®, Windows®, or other OS/RTOS based design. Additionally, several expansion connectors expose the processing system and programmable logic I/Os for easy user access.
Delivery within 2-3 weeks
+ −
Add to wish list
410-251 JTAG-SMT2: Surface-mount Programming Module
US$67.11
The JTAG-SMT2 uses a 3.3V main power supply and a separate Vref supply to drive the JTAG signals. All JTAG signals use high speed, 24mA, three-state buffers that allow signal voltages from 1.8V to 5V and bus speeds of up to 30MBit/sec. The JTAG bus can be shared with other devices as systems hold JTAG signals at high-impedance, except when actively driven during programming. The SMT2 module is CE certified and fully compliant with EU RoHS and REACH directives. The module uses a standard Type-A to Micro-USB cable available for purchase from Digilent, Inc.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-21474, Dual-Mode Bluetooth Module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1
US$9.96
The WAVE-21474 is a 5.1 Bluetooth module designed for the Raspberry Pi Pico. It supports SPP and BLE and can be controlled via UART commands.
In stock
+ −
Add to wish list
WAVE-21179, ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi, With LCD and Pinheader
US$22.52
The WAVE-21179 is a wifi development board with compact size and plenty of peripherals. It has an integrated low-power WiFi SoC chip, a built-in LED Display and preinstalled headers for easy installation.
In stock
+ −
Add to wish list
ARD-JMP-KIT Basic Electronics Component Jump Starter Kit for Arduino
US$12.76

This electronic components kit contains the basic items including a breadboard, jumper wires, resistors, buttons and more to help you get started with learning Arduino or any electronic project.

In stock
+ −
Add to wish list
WT32-ETH01 Embedded WiFi Bluetooth-Compatible Ethernet Serial Port Wireless Module Network Combo Serial to Ethernet Module based on ESP32
US$34.08
The WT32-ETH01 is an embedded WiFi Bluetooth-Compatible Ethernet Serial Port Wireless Module Network Combo.
In stock
+ −
Add to wish list
AM-143 NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
US$3.75
This is an adjustable square wave signal generator with pulse frequency duty cycle using the good old NE555 Chip to output a pulse at a frequency determined by an adjustable resistance at the end of the module. LOad in between 5 and 12V and it’ll output a square wave.
In stock
+ −
Add to wish list
WAVE-20265, PL2303 USB To UART (TTL) Communication Module V2, USB-A Connector
US$5.41
The WAVE-20265 is a USB To UART (TTL) Communication Module V2 with a USB-A Connector.
In stock
+ −
Add to wish list
TEL0148, Fermion: Serial Data Logger for Arduino
US$7.25
The TEL0148 is a Data Logger for the Arduino. It supports a 32GB TF card and can be connected directly to a PC computer.
In stock
+ −
Add to wish list
MOD-XH-M802 Passive Mixer Tone Amplifier Module Board High and Low Voltage
US$6.75
This is a Passive Mixer Tone Amplifier Module Board High and Low Voltage
In stock
+ −
Add to wish list
DFR0789 Gravity: LED Switch Kit
US$36.25
This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little buttons can be used with micro:bit to realize various fun interactive projects, such as switch, backlight keyboard, music player panel, and recording control panel.
In stock
+ −
Add to wish list
DFR0785 Gravity: LED Button Kit
US$40.00
This is a simple LED-illuminated switch button. It’s just like a common switch button but lights up different colors(red/yellow/green/blue/white) when pressed down, which gives us visual feedback. These little buttons can be used with controllers like micro:bit, Arduino, etc., to realize various fun interactive projects.
In stock
+ −
Add to wish list
TEL0147, Gravity: Serial Data Logger for Arduino
US$17.25
The TEL0147 is a Data Logger for the Arduino. It comes with 128MB of Flash Memory built-in and can be connected directly to a PC computer.
In stock
+ −
Add to wish list
DFR0942, ART-Pi STM32H750 Cortex-M7 Development Board
US$105.00
The DFR0942 is an open-source cortex development board. It's equipped with a high-performance processor and core. The development board also carries with it an array of peripherals and expansion ports.
Delivery within 2-3 weeks
+ −
Add to wish list
PI-CAMERA-N2, 5MP Fisheye IR Camera, 160 Degrees for Raspberry Pi
US$26.80
This product is a 5MP Fisheye Lens camera for the Raspberry Pi. Its small and compact form factor allows plenty of versatility for any of your projects. It also comes with IR lights for built-in night vision!
In stock
+ −
Add to wish list
PI-CAMERA-N3, 5MP Fisheye IR Camera, 95 Degrees for Raspberry Pi
US$31.80
This product is a 5MP Fisheye Lens camera for the Raspberry Pi. Its small and compact form factor allows plenty of versatility for any of your projects. It also comes with IR lights for built-in night vision!
In stock
+ −
Add to wish list
PI-CAMERA-N4, 5MP Fisheye IR Camera, 70 Degrees for Raspberry Pi
US$27.25
This product is a 5MP Fisheye Lens camera for the Raspberry Pi. Its small and compact form factor allows plenty of versatility for any of your projects. It also comes with IR lights for built-in night vision!
In stock
+ −
Add to wish list
PI-CAMERA-2, 5MP Fisheye Camera, 160 Degrees for Raspberry Pi
US$22.70
This product is a 5MP Fisheye Lens camera for the Raspberry Pi. Its small and compact form factor allows plenty of versatility for any of your projects.
 
In stock
+ −
Add to wish list
PI-CAMERA-3, 5MP Fisheye Camera, 95 Degrees for Raspberry Pi
US$27.25
This product is a 5MP Fisheye Lens camera for the Raspberry Pi. Its small and compact form factor allows plenty of versatility for any of your projects.
 
In stock
+ −
Add to wish list
PI-CAMERA-4, 5MP Fisheye Camera, 70 Degrees for Raspberry Pi
US$21.61
This product is a 5MP Fisheye Lens camera for the Raspberry Pi. Its small and compact form factor allows plenty of versatility for any of your projects.
 
In stock
+ −
Add to wish list
OAC808GPS35 Maduino Zero SIM808 GPS Tracker V3.5
US$36.17
This V3.5 is the Newest Version of the Maduino Zero SIM808 GPS Tracker. Maduino Zero SIM808 GPS Tracker is an IoT (Internet of things) Solution based on the 32-bit Atmel’s SAMD21 MCU and GPRS/GSM GPS/Bluetooth module SIM808. It integrates a micro Controller ATSAMD21G18, SIM808, power management, and storage, to make the SIM808 GPS Tracker ready for a real project for IoT projects such as smart-home, outdoor monitoring, shared bicycle, etc. The Maduino Zero SIM808 GPS Tracker based on the Arduino, users can program it with Arduino IDE, which is very easy especially suit for the none-programmers.
In stock
+ −
Add to wish list
MAPLC Maduino Power-Line Communication (PLC)
US$53.46
Power-line communication (PLC) carries data on AC or DC wires. It works by adding a modulated carrier signal to the wiring system. the power distribution system was originally intended for the transmission of AC power at typical frequencies of 50 or 60 Hz, it has only a limited ability to carry higher frequencies, but for some applications such as the sensor monitoring in smart-home, that’s enough.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-21160 Binocular Camera Base Board Designed for Raspberry Pi Compute Module 4, Includes Interface Expander & FFC
US$109.15
Binocular Camera Base For CM4. Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products. Designed for Compute Module 4 Lite/eMMC variants. Comes with additional interface expander, providing standard 40PIN GPIO header for HATs, M.2 slot for SSD or communication module, and more video/USB ports.
In stock
+ −
Add to wish list
WAVE-21366 7inch Capacitive Touch Display for Raspberry Pi, with Protection Case and 5MP Front Camera, 800×480, DSI
US$122.62
Supports Raspberry Pi OS, 5-points touch, driver free. Supports Ubuntu, single point touch, driver free. Supports Pi 4B.
In stock
+ −
Add to wish list
WAVE-20806 7inch Capacitive Touch Display for Raspberry Pi, with 5MP Front Camera, 800×480, DSI
US$108.97
Device & system support: Raspberry Pi. Supports Raspberry Pi OS, 5-points touch, driver free. Supports Ubuntu, single point touch, driver free. Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4*. * CM3/3+/4 requires extra adapter board.
In stock
+ −
Add to wish list
PI-TB-PGIO GPIO Terminal Block Breakout Board Module for Raspberry Pi
US$21.61
This GPIO Terminal Block Breakout Board Module for the Raspberry Pi 4B has labels so that you can easily identify the pins.
In stock
+ −
Add to wish list
WAVE-21173 Grey DIN Rail ABS Case for Raspberry Pi 4
US$6.32
DIN Rail ABS Case For Raspberry Pi 4. DIN Rail Mount Support, ABS Material, Clear Top Window, Large Inner Space.
In stock
+ −
Add to wish list
WAVE-21177 DIN Rail Aluminum Case for Raspberry Pi 4, with Cooling Fan and Heatsinks
US$17.70
DIN Rail Aluminum Case For Raspberry Pi 4. Comes with cooling fan and heatsinks. Industrial Grade, DIN Rail Mount Support.
In stock
+ −
Add to wish list
WAVE-20885 Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4
US$77.30
Dual GigE 5G/4G Base For CM4. Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products. Powerful Ethernet Capability, 5G/4G Cellular Support.
Delivery within 2-3 weeks
+ −
Add to wish list
PI4B-CASE-AL2F-BK Raspberry PI4B Black Aluminum Case, Double Fan
US$22.52

This is a black matte aluminum Raspberry PI4B case with double fans.  

In stock
+ −
Add to wish list
PI4B-CASE-1F-CL Raspberry PI4B Clear ABS Case with Fan.
US$9.05

PI4B-CASE-1F-CL - This is a transparent plastic ABS color Raspberry PI4B case, with fan.  

In stock
+ −
Add to wish list
EF01033, Pico:ed - Development board based on Raspberry Pi RP2040
US$24.98
The EF01033 is a board based on the Raspberry Pi RP2040 MCU. It has a dual-core Arm Cortex-M0+ processor with 264KB RAM, some peripherals and shares a resemblance with the classic micro:bit.
In stock
+ −
Add to wish list
CN0344D, PiSloth Robot Kit-AI Programmable Robot Kit for Raspberry Pi
US$136.27
The CN0344D is the SunFounder PiSloth. it's engineered for the Raspberry Pi platform with many great and interesting talents and it supports DIY customization by creating your own head masks.
In stock
+ −
Add to wish list
WAVE-20987, Industrial Gigabit PoE Splitter, Metal Case protection, 5V 2.5A Type-C Out
US$24.52
The WAVE-20987 is an industrial Gigabit PoE splitter with metal case protection. The splitter supports 5V 2.5A type-C power output.
In stock
+ −
Add to wish list
WAVE-21006, Dual Gigabit Ethernet 5G/4G Mini-Computer Based on Raspberry Pi Compute Module 4 (NOT Included), Metal Case, with Cooling Fan
US$90.77
The WAVE-21006 is a dual Gigabit ethernet 5G/4G baseboard, which is designed for Raspberry Pi Compute Module 4. It is suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
In stock
+ −
Add to wish list
4516-ADA Adafruit Feather nRF52840 Sense
US$57.83
This Feather microcontroller comes with Bluetooth Low Energy and native USB support featuring the nRF52840! This Feather is an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB plus battery charging. With native USB it works great with CircuitPython, too.
Delivery within 2-3 weeks
+ −
Add to wish list
4062-ADA Adafruit Feather nRF52840 Express
US$36.35
This chip has twice the flash, and four times the SRAM of its earlier sibling, the nRF52832 - 1 MB of FLASH and 256KB of SRAM. Compared to the nRF51, this board has 4-8 times more of everything. For this chip, we've added Arduino IDE support - you can program the nRF52840 chip directly to take full advantage of the Cortex-M4 processor, and then calling into the Nordic SoftDevice radio stack when you need to communicate over BLE. Since the underlying API and peripherals are the same for the '832 and '840, you can supercharge your older nRF52832 projects with the same exact code, with a single recompile!
In stock
+ −
Add to wish list
4500-ADA Adafruit CLUE - nRF52840 Express with Bluetooth LE
US$59.10
Get a CLUE here at Adafruit by picking up this sensor-packed development board. We wanted to build some projects that have a small screen and a lot of sensors. To make it compatible with existing projects, we made it the same shape and size as the BBC micro:bit and with the same edge-connector on the bottom with 5 big pads so it will fit into your existing robot kit or 'bit add-on.
Delivery within 2-3 weeks
+ −
Add to wish list
CRT13450K ESP8266 IOT Weather Station Kit
US$45.27
This ESP8266 IOT Weather Station Kit is based on esp8266 wifi function to achieve remote data transmission products, through the three sensors to collect temperature and humidity information and to achieve water droplets detection And UV intensity testing. Three sensor performance is very good, the first Crowtail- temperature & humidity sensor, which uses DHT11 sensor can simultaneously measure the temperature and humidity and then digital signal output. The water flow sensor can detect whether the outside is raining, and the last uv sensor can detect the UV intensity in the current environment.
In stock
+ −
Add to wish list
Raspberry Pi Build HAT
US$40.72
The Raspberry Pi Build HAT combines the power of Raspberry Pi computing with LEGO® hands-on learning to enable a fun and creative learning experience for students, teachers and makers. The Raspberry Pi Build HAT is an add-on board designed in collaboration with LEGO® Education to make it easy to control LEGO® Technic™ motors and sensors with Raspberry Pi computers.
 
In stock
+ −
Add to wish list
48W Power Supply for Build HAT
US$26.16
Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® TechnicTM motors, as well as your Raspberry Pi computer.
In stock
+ −
Add to wish list
WAVE-20818, 8.8inch IPS Side Monitor, 480×1920, HDMI, HiFi Speaker, No Touch
US$145.37
The WAVE-20818 is an 8.8inch IPS Side Monitor. It has a resolution of 480×1920 and carries an HDMI port and a HiFi Speaker. It's compatible with Raspberry Pi, Jetson nano and PC.
In stock
+ −
Add to wish list
WAVE-20869, RPi FPC Camera (B) for Raspberry Pi, OV5647, 5MP, Mini Size
US$27.07
The WAVE-20869 is a mini-sized camera module designed for the Raspberry pi. It's a 5-megapixel camera able to capture photos and video with variable resolution and frame rate.
In stock
+ −
Add to wish list
WAVE-21020, 10.1inch HD Capacitive Touch Screen LCD (G), 1920×1200, HDMI, IPS, Fully Laminated Screen
US$199.97
The WAVE-21020 is a 10.1inch Capacitive Touch, fully laminated, LCD Screen. It has a resolution of1920x1200, supports HDMI, IPS and 10-Points Touch and it's compatible with Raspberry Pi, Jetson Nano, And PC.
In stock
+ −
Add to wish list
RF Nano V3.0 ATMEGA328P + NRF24I01 2.4G Wireless
US$22.70
This product named Nano has the same processing power as an Uno but has a smaller form factor. Based on the ATmega328P microprocessor. Specifications: Microcontroller: ATMEL ATmega328p. Operating Voltage (Logic Level): 5VDC. Input Voltage on RAW pin (recommended): 7 ~ 12VDC. Input Voltage on RAW pin (Limit): 6 ~ 20VDC. Digital I/O Pins: 14 (6 can provide PWM output). Analog Input Pins: 8. DC Current per I/O Pin: 40mA. Flash Memory: 32KB (2KB is used for bootloader). SRAM: 2KB. EEPROM: 1KB. Clock Speed: 16MHz.
In stock
+ −
Add to wish list
DFR0699 Gravity: I2C Voice Recorder Module EDU
US$17.25
Gravity: I2C Voice Recorder Module EDU is DFRobot all-in-one voice interaction module, which integrates recording and playback functions into one. It can record with one button, and also supports Gravity: I2C interface for recording and playback by microcontroller. And support number synthesis reading function, simple programming can be directly broadcast temperature, humidity, voltage, time and other data, support headphones or speaker output, built-in amplifier plug and play.
Delivery within 2-3 weeks
+ −
Add to wish list
WRL-18034 ESP32-C3 WROOM Module - 4MB (PCB Antenna)
US$5.41
The Espressif ESP32-C3 is the next version of the popular ESP32 Bluetooth® and WiFi enabled module. This module features a single core, RISC-V-based processor with WiFi and Bluetooth LE 5.0 radios built into the SoC. The module features a PCB antenna and castellated plated pins for surface-mount soldering. This variation has 4 MB of on-board SPI flash and is the 85 °C temperature tolerant version.
Delivery within 2-3 weeks
+ −
Add to wish list
DEV-18615 Ethernet Kit for Teensy 4.1
US$5.49
The Ethernet Kit for Teensy 4.1 from PJRC includes an Ethernet MagJack connector, a bare circuit board, one ribbon cable, two headers, and a capacitor. As this is a kit that require assembly, some beginner-level soldering is required.
In stock
+ −
Add to wish list
3671-ADA Adafruit CSI or DSI Cable Extender for Raspberry Pi
US$4.32
The Adafruit CSI or DSI Cable Extender for Raspberry Pi t lets you connect two 15-pin 1.0mm pitch cables end-to-end and extend the length.
In stock
+ −
Add to wish list
DFR0914 4-Channel Level Converter (12V to 5V), Din Rail
US$14.51
This 12V to 5V level converter module with 4-channel Optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 5V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
DFR0913 4-Channel Level Converter (12V to 3.3V), Din Rail
US$13.60
This 12V to 3.3V level converter module with 4-channel Optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 3.3V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
DFR0912 2-Channel Level Converter (12V to 5V), Din Rail
US$10.87
This 12V to 5V level converter module with 2-channel optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 5V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
DFR0911 2-Channel Level Converter (12V to 3.3V), Din Rail
US$10.87
This 12V to 3.3V level converter module with 2-channel optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 3.3V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
FIT0807 PiTray Clip Din Rail Mount (Compatible for Raspberry Pi and NVIDIA Jetson Nano)
US$9.96
PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail installation solution suitable for industrial setup, home automation application as well as cluster building.
In stock
+ −
Add to wish list
WAVE-20808, Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Plus version (Pre-soldered headers)
US$15.24
The WAVE-20808 is an MCU board that incorporates the RP2040 microcontroller, with a dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins
In stock
+ −
Add to wish list
WAVE-20335, Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Mini version (Pre-soldered header)
US$9.05
The WAVE-20335 is a small MCU board. It uses the RP2040 microcontroller chip designed by Raspberry Pi, has 264KB of SRAM and 2MB of onboard Flash memory. It's extremely compact yet packs a punch with its processing power and peripherals.
In stock
+ −
Add to wish list
1 - 8
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
10 - 24