Our Brands

Educational Kits/ Trainers

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 19
Newest Items First
24 Per Page
ring:bit car v2 for micro:bit (without micro:bit)
US$34.01
The ELECFREAKS Ring:bit Car is a small DIY smart car driven by the BBC micro:bit and the ELECFREAKS Ring:bit. The Ring:bit extends the micro:bit's 3 GPIO ports and allow for different sensors and components to be easily attached to the micro:bit. A basic Ring:bit Car can be easily programmed to run autonomously, with a remote control, and even create rainbow beacons of light. Just add one of the many extensions available and your Ring:bit Car can do even more things like line and light following, obstacle avoiding, drawing and more!
In stock
+ −
Add to wish list
AK-285 Pocket Metal Detector with On-board Printed Coil D.I.Y. Kit
US$5.99
This kit is a low-power metal detector. It is designed to function using simple electronic components. This metal detector benefits from an internal coil embedded into the Printed Circuit Board (PCB) which makes it a better option in terms of ease of handling compared to the traditional versions with a copper coil hanging off the side.
In stock
+ −
Add to wish list
AK-275 FM Transmitter and MP3 Repeater D.I.Y. Kit
US$9.05
This kit is consisted of all the components required to build a low-power FM transmitter and MP3 repeater module. It is designed to function using simple electronic components; therefore, no integrated circuit (IC Chip) is required.
In stock
+ −
Add to wish list
AK-280 Vibrating LED Dice D.I.Y. Educational Kit
US$13.33
The Vibrating LED Dice kit works based on a vibrator switch that allows the IC chip to use its logic to toggle through different dice combinations while the device is held upside down (when the LEDs are facing down). Once the device is turned around, a randomly picked dice combination is represented by the LEDs.
In stock
+ −
Add to wish list
AK-270 HEX3653 FM Radio Receiver Module D.I.Y. Kit
US$6.99
This FM receiver is a D.I.Y. kit that requires soldering through-hole and surface mount components on a double-sided printed circuit board. It is designed for users with advanced soldering tools and skills. You must solder the IC pins on the top surface and the rest of the components’ leads on the bottom side of the board.
In stock
+ −
Add to wish list
753307 Complete Student Guide Set (excludes SC-100R)
US$31.80
This includes two project books, teacher guide, and student guide. The teacher guide is meant to prepare educators for proper introduction of Snap Circuits and guide them through each chapter with quizzes for students to test their knowledge.
In stock
+ −
Add to wish list
753294 Snap Circuits Student Guide for SC-100R
US$12.53
This includes two project books, teacher guide, and student guide. The teacher guide is meant to prepare educators for proper introduction of Snap Circuits and guide them through each chapter with quizzes for students to test their knowledge.
Delivery within 2-3 weeks
+ −
Add to wish list
753290 Snap Circuits Teachers Guide 100/300/500
US$8.33
This includes two project books, teacher guide, and student guide. The teacher guide is meant to prepare educators for proper introduction of Snap Circuits and guide them through each chapter with quizzes for students to test their knowledge.
Delivery within 2-3 weeks
+ −
Add to wish list
AK-72 Running Flow LED Light NE555+CD4017 Module – D.I.Y. Kit
US$4.61
It has a double-sided board with surface mount and through-hole configuration. It is designed for users with advanced soldering skills. You must solder some components on the top surface and some components on the bottom side of the board.
In stock
+ −
Add to wish list
EF08191 Power:bit watch kit for microbit (without Micro:bit Board)
US$15.26
Power:bit button cell board is a micro expansion board in the smallest size equipped with a buzzer. It can not only supply power to the board but is also equipped with P1, P2,GND and 3V ports by the row needles, which can be used with our acrylic watch straps and boards.
In stock
+ −
Add to wish list
AK-177 Touch Delay TDL-555 Timer with LEDs – Educational D.I.Y. Kit
US$5.41
This is a DIY kit that comes with all the components you need to assemble and solder a touch-triggered 555 timer. The circuit board is a single-sided through-hole design meaning you must solder only on one side of the board. The assembly is easy for average electronic gurus. All you need to have is basic soldering tools and a 5vdc power supply.
In stock
+ −
Add to wish list
LENSE-VR 25MM Biconvex VR 3D Glass Lens
US$0.99
25MM Biconvex VR 3D Glass Lens   These are glass lenses for 3D virtual reality experiences. So if you lose any of the lenses of your Google Cardboard...
In stock
+ −
Add to wish list
AK-260 Educational DIY Calculator Kit with Acrylic Casing and Buttons
US$31.80
This is a great DIY calculator kit for beginners and electronics enthusiasts. It is easy to install, helps learners to improve their soldering skills and has all the features you would expect from a basic calculator!
In stock
+ −
Add to wish list
AK-230 DIY 30 VDC  1A  AC-DC Regulated Power Supply KIT
US$9.51
This kit is a simplified LM317 circuit that allows the user to source up to 30 Volts AC from any transformer, and output regulated DC voltage that can be adjusted by the potentiometer. The maximum current this power supply module can output is around 1 Ampere and a maximum regulated DC voltage of 30 Volts.
In stock
+ −
Add to wish list
AK-250 1 Amp Breadboard Power Supply DIY Kit module – 9, 5 and 3 VDC Dual Rail Output
US$12.53
This product is a solder kit that requires soldering the provided components to get it working. The function of this board is to act as a voltage regulator that can be plugged onto any breadboard that has power rails on both sides.
In stock
+ −
Add to wish list
AK-240 ABRA STEM SERIES: Motor Driver Module L298 – Educational D.I.Y KIT
US$12.69
This motor driver kit comes with a well documented color manual and all the parts required to assemble and solder your very own fun and useful kit. The unique pc board has gold plated holes for easier soldering and better quality. The full page color manual contains step-by-step instructions and theory on h-bridges, transistors and duty cycles. It also contains example code for programming with arduino and schematics.
In stock
+ −
Add to wish list
CZ0042 Arduino Smart Internet of Things Kit (IOT) V2.0  
US$111.99
This is a great kit for you to learn about Arduino and the Internet of Things along with connecting many smart home devices within a smart network with the help of the included lessons provided by SunFounder. 
In stock
+ −
Add to wish list
SF-SLOTHBIT SunFounder BBC micro:slothbit Humanoid Robot 
US$125.99
Sloth:bit is a programmable biped robot powered by BBC micro:bit. With the Visual programming from micro:bit APP, sloth:bit can be very easy to program and play. Visual programming can be applied on pad or cellphone; also, when downloading Process, it can be complete by Bluetooth without cables.
In stock
+ −
Add to wish list
EF08183 ElecFreaks Micro:bit Tinker Kit (without Micro:bit Board)
US$69.94
ElecFreaks Micro:bit Tinker Kit (Without Micro:bit Board) is a set of accessory for micro:bit, which enables you to connect all kinds of modules easily without a group of messy breadboard wires.
In stock
+ −
Add to wish list
SC-3DI Snap Circuits® Elenco SC-3Di 3D Illumination
US$81.85
Snap Circuits® Elenco SC-3Di 3D Illumination Snap Circuits 3D Illumination Exciting light effect 3-color light tunnel Projector with 6...
In stock
+ −
Add to wish list
SCP-08 Snap Circuits® Electromagnetism
US$20.65
Compare an electromagnet to a normal magnet. Have lots of fun while learning about electricity and magnetism. Easy to use and will make kids smarter.
In stock
+ −
Add to wish list
WAVE-14262 KitiBot, Starter Robot, Graphical Programming, 2WD Version
US$111.93
KitiBot is specially designed for STEAM education, comes with graphical programming software to help kids to learn programming just like easily building blocks. KitiBot-MG-W is the 2WD version. Combined with the open source demo codes from Waveshare, KitiBot is also an ideal choice for electronics enthusiasts and creators to fast get started with robotic development. KitiBot features a control board named Mega2560, and several typical robotic functional modules includes: line tracking, obstacle avoiding, ultrasonic ranging, servo, IR remote control, etc.
In stock
+ −
Add to wish list
SC-GROUP-K Group Kit
US$249.95
The group kit is great for classrooms, makerspaces and more! Every group kit is packed in a sturdy, plastic case and includes: 10 - Battery Holders (40 AA Batteries not Included) 10 - Piezoelectric Buzzers 10 - Motors with Fan Blades 10 - Switches 80 - LEDs - 10 ea in Red, Green, White, Yellow, Orange, Purple, Blue, and Color Changing We suggest up to 3 children per battery holder, so this kit accommodates groups of 1-30. This kit does not come with dough, but we suggest purchasing two 'Squishy Circuits Dough Kits' which will provide the correct amount of conductive and insulating dough. Remember that making the dough can be a fun group activity! We would still suggest purchasing insulating dough though because the purchased version works much better.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-13747 Raspberry Pi Compute Module 3 Development Kit Type A
US$139.93
Raspberry Pi Compute Module 3 Development Kit Type A, CM3 IO Board, DS18B20, IR Remote Controller. The key parts in this Compute Module 3 development kit includes: Compute Module 3: Raspberry Pi 3 industrial version, the Pi in a flexible form factor, with 4GB eMMC Flash. Compute Module IO Board Plus: Extend kinds of interfaces from CM3, such as USB, HDMI, just like the regular Pi, to help evaluating.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 19