BLE400 Features: Onboard battery holder, multi power supplies are available. All the IOs are accessible for easy expansion. Integrates CP2102 for debugging. LEDs and user keys, compatible with other official boards, easy to use.
Wow that's a tiny GPS antenna! This passive antenna is only 9mm x 9mm x 6.5mm in size, with a 50mm long uFL cable. Great for when you want to keep things small. Comes with a standard uFL connector on the end.
This is a great inexpensive option for wireless communication; it's an ISM band FSK transceiver module implemented with a unique PLL. These modules operate in the 434MHZ band and fully comply with FCC and ETSI regulations.
It's based on RoyalTek REB-4216 GPS module, and the footprints is compatible with Arduino/MEGA boards. The regular GPS pins (RX, TX) can be connected to D0-D7 of Arduino. Adding GPS to your Arduino has never been easier. Multiple GPS receivers attach easily to the shield, and with the example sketch (check below), you will be able to locate your exact position within a few meters. Here's where we are. GPS also gives you amazingly accurate time! It’s suitable for the following applications with Arduino or Arduino compatible boards : Automotive navigation, Personal positioning, Fleet management, Marine navigation.
This is an 802.11n wireless adapter with antenna, which allows you to connect your Raspberry Pi or BeagleBone Black to a Wi-Fi network.
This is a useful tool that allows to connect Personal Computers or a microcontroller in wireless networks using the famous XBee wireless modules. Connection is done via USB port and when you plug the board into the USB port, the PC system will recognize it as a serial VirtualCOM Port (VCP) which will realize the communication with the XBee module.
This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure).
This is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load precompiled, open-source apps onto the TI CC2511F32 microcontroller at the heart of the Wixel, turning it into a wireless serial link, data logger, or whatever you need for your current project.
This is a shield that allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless programming, debugging, and control using standard Arduino software.
This GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 66 channel GPS SMD type receivers that use MediaTek chip solution.
This is a 1.75 inch communication cable that connects the EM406 and the EM401.
This is a 1 foot communication cable extension that mates with the EM406 and EM401.
This is a standalone, complete TCP/IP wireless networking module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices.
This is a 2.4GHz XBee Pro 50mW module with a reverse polarized sma connection. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware.
