WL-100 Wireless Remote Control with 4 Relay Modules and 2 Remote Controls

Wireless Remote Control with 4Relay Modules and 2 Remote Controls

Features

4 Relay Module w/2 Remote Controls.
Remotely control up to 4 devices up to 200 meters away.
Four 10 Amp relays rated at 125VAC with two separate remotes.
Extremely easy to set up and use.
Perfect for domestic applications such as remote lighting and appliance control, up down control for motorized window shades, electric door entrance access, etc.
Excellent wireless remote control for robotics applications.

Remote Control Set Up

Relays corresponding to ABCD buttons are from RIGHT to LEFT when facing the output connectors.

Note: The two remotes have to be programmed separately.

1. The BLUE LED will come on to indicate POWER ON.
2. Press the black programming button on the relay module next to the LED.
The BLUE LED will turn OFF to indicate that it is ready to accept a button code.
Push button “A” twice on one of the remotes.
You will hear a click from the relay and the LED will flash 3 times and then stay ON indicating that is has
accepted the “A” code for this remote.
You can check by pressing the “A” button to toggle the “A” relay ON and OFF.
3. Press the programming button on the relay module again and repeat procedure for buttons B, C and D.
4. Repeat the procedure for the second remote set of buttons.
The programs will be retained even if power is removed from the module.
To reset all programs for both remotes hold the programming button down for about 8 seconds until the LED turns back on.

Output Control

Each relay has contacts labeled ABC:
A: (N.O.) B: (COMMON) C: (N.C.)
With initial power ON Relay A has contacts BC made and Relays BCD have contacts AB made.
To reset all the relays to the same state with contacts BC made push each of the buttons in order A, B, C, and then D.
The relays will now toggle ON/OFF with each push of their respective button.

Relay Module

1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40°c+80°c
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 315mhz
6. Output voltage: DC and AC as required
7. Relay normal current: 3A
8. Max load current: 10A
9. Dimensions: 72 x 52 x 26mm

Remote Control

1. Remote Range: 200 meters
2. Operating Voltage: DC 12V
3. Frequency: 315 Mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code
6. Dimensions: 58 x 39 x 14mm

Items Included

1 x Relay Module
2 x Remote Control