Our Brands

Development Boards

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 23
Newest Items First
15 Per Page
WAVE-27523 PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard (Basic kit + 256GB Solid State Drive)
US$72.57
PCIe To M.2 Adapter For Raspberry Pi 5. Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing.
In stock
+ −
Add to wish list
WAVE-27467 2.13inch E-Paper HAT+ For Raspberry Pi, E-Ink Display, 250x122, Immersion Gold Process, SPI Interface, HAT+ Standard, With Pwnagotchi Tutorial
US$27.07
Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws. Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications.
In stock
+ −
Add to wish list
EF04061 ELECFREAKS Octopus Linear Slider Potentiometer Brick
US$8.14
ELECFREAKS Octopus Linear Slider Potentiometer Brick is a type of electronic building block module based on a 10k linear sliding potentiometer. Sliding the potentiometer can change the voltage from 0V to VCC as well as the red LED on and off onboard. It can be used as a resistor potentiometer, HID control panel, and electronic building block kit.
In stock
+ −
Add to wish list
WAVE-27386 Rail-mount TTL To RS232 Galvanic isolated Converter, Full-Duplex Communication, Lightningproof & Anti-Surge, TTL Serial Converter
US$17.06
Compatible with TTL/RS232 standard, converting the TTL signal into RS232 signal, supports full-duplex communication. Compatible with 3.3V ~ 5V TTL signal level, provides anti-reverse and over-voltage protection for power supply interface. Onboard unibody power supply isolation, provides stable isolated voltage and needs no extra power supply for the isolated terminal. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption.
In stock
+ −
Add to wish list
WAVE-27377 MiniPCIe interface to 2-CH CAN Card, Supports Decoding And Analyzing Function of Multiple CAN Protocols, High-performance Hardware Solution
US$118.07
The 2-CH CAN MiniPCIe expands two CAN interfaces, adopts standard MiniPCIe card size and can be easily installed on a laptop or industrial computer with MiniPCIe slot, and integrates two complete CAN isolation interface circuits. Supports Windows and Linux systems, comes with drivers, CANTools related software, secondary development examples and tutorials. Comes with a USB TO MiniPCIe adapter board, for connecting to the PCs or industrial control hosts via USB port to realize transceiver control, data analysis, collection and monitoring of CAN bus network.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-27466 USB To UART (TTL) Mini Communication Module, Compact Size, Stable Communication, Over-current/Over-voltage Protection, TTL Serial Converter, USB To TTL Converter (Standard version)
US$9.78
Onboard original FT232RNL chip, fast communication, stable and reliable, better compatibility. Castellated holes design, compact size, easy to integrate into the device by soldering UART communication baudrate: 300bps~3Mbps. Onboard self-recovery fuse and ESD diode, provides over-current/over-voltage protection, stable and safe operation. Onboard TXD and RXD indicators for monitoring transceiver status.
In stock
+ −
Add to wish list
WAVE-27479 TTL To RS485 (C) Galvanic Isolated Converter, Half-Duplex Communication, Lightningproof & Anti-Surge, Multi-Isolation Protection
US$11.60
Compatible with TTL/RS485 standard, converting the TTL signal into differential RS485 signal, supports half-duplex communication. Compatible with 3.3V ~ 5V TTL signal level, provides over-voltage protection for power supply interface. Onboard unibody power supply isolation, provides stable isolated voltage and needs no extra power supply for the isolated terminal. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption.
In stock
+ −
Add to wish list
WAVE-27480 PCIe To 2-ch M.2 Adapter for Raspberry Pi 5, Compatible with 2230/2242 Size NVMe Solid State Drive, Raspberry Pi 5 M.2 HAT
US$27.07
Dual NVMe Solid State Drives Support. Compatible With 2230/2242 Size M.2 Solid State Drives. Supports PCIE X1 Gen2 Only, Does Not Support Booting PI5 From Solid State Drive. Onboard Dual LED Indicators, Easy To Monitor The Working Status.
In stock
+ −
Add to wish list
ESP32-DEVKITC-32E, Espressif Systems ESP32-DEVKITC Microcontroller
US$27.25
ESP32-DEVKITC-32E, Espressif Systems ESP32-DEVKITC Microcontroller You want to prototype a new electronic device but don't have the time or money to...
Delivery within 2-3 weeks
+ −
Add to wish list
EF08314 micro:bit Smart Climate Kit, designed based on micro:bit V2 and IOT:bit expansion board ELECFREAKS
US$118.07
Smart Climate Kit is an innovative product designed based on micro:bit V2 and IOT:bit expansion board. Equipped with a variety of sensors such as wind speed sensor, temperature and humidity sensor, UV sensor, dust sensor, and OLED display, it can monitor and record a variety of environmental data in real-time. And upload the data to the cloud. The target of the Smart Climate Kit is to combine meteorological science and IoT technology to stimulate children's curiosity about natural phenomena and develop their scientific thinking and data analysis skills.
In stock
+ −
Add to wish list
ARD-FTDI-C, Type-C USB to TTL adapter
US$8.87
ARD-FTDI-C , Type-C USB to TTL adapter This module adopts a high-speed Type-C interface, which can be directly connected to Android phones, tablets,...
In stock
+ −
Add to wish list
MOD-100-C, Type-C USB to RS485 adapter with 3 pin screw terminals
US$13.42
MOD-100-C, Type-C USB to RS485 adapter with 3 pin screw terminals Product Specification: Equipped with three LED indicator lights: RXD, TXD,...
In stock
+ −
Add to wish list
WAVE-27070 ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, Adapter Board and FPC Cable Included
US$10.69
Adopts ESP32-S3FH4R2 chip with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, onboard 2MB PSRAM and 4MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. Onboard FPC 8PIN connector, supports adapting USB Type-C port via adapter board 34 × multi-function GPIO pins.
In stock
+ −
Add to wish list
WAVE-27033 ICE Tower CPU Cooling Fan for Raspberry Pi 5, Raspberry Pi 5 Cooler, U-Shaped Copper Tube, Cooling Fins, With Colorful RGB LED
US$34.26
Tower-Style, 5mm Copper Tube, Multi Fins Heatsink, Powerful Cooling. Large Area Cooling Fins And Directly-Contacted Copper Tube, Super Heat Dissipation Reducing The Temperature Of The Raspberry Pi From 80℃ To 40℃ While Overclocking.
In stock
+ −
Add to wish list
WAVE-27034 Low-Profile ICE Tower CPU Cooling Fan for Raspberry Pi 5, Raspberry Pi 5 Cooler, U-Shaped Copper Tube, Cooling Fins, With Colorful RGB LED
US$34.26
Large Area Cooling Fins And Directly-Contacted Copper Tube, Super Heat Dissipation Reducing The Temperature Of The Raspberry Pi From 80℃ To 40℃ While Overclocking. Color LED Fan With Automatic Color Change, Make It More Dazzling And Gorgeous. Rated Power 0.4W @5V, 0.08A, Elaborately Tuned Fan Lower Noise, Higher Performance.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 23