ESP32-PICO-KIT-1, ESP32-PICO-V3 Based Development Board
ESP32-PICO-KIT-1 is an ESP32-PICO-V3 based development board produced by Espressif. It provides users with hardware for developing applications based on the ESP32, making it easier to explore ESP32 functionalities.
Specifications
- SoC: ESP32-PICO-V3
- CPU: Xtensa® dual-core 32-bit LX6 microprocessor
- Clock Speed: Up to 240 MHz
- SRAM: 520 KB
- ROM: 448 KB
- Wireless Connectivity:
- Wi-Fi: 802.11 b/g/n (2.4 GHz)
- Bluetooth: Bluetooth 4.2 and BLE
Key Components
- ESP32-PICO-V3 Module: Integrates the ESP32 SoC, flash memory, and crystal oscillator into a single package.
- USB-to-UART Bridge: CP2102N chip providing up to 3 Mbps transfer rates.
- LDO Voltage Regulator: Converts 5V from USB to 3.3V required by the board.
- Micro USB Port: For power supply and data transfer.
I/O and Connectivity
- GPIO Pins: All ESP32-PICO-V3 pins are broken out to 0.1” header pads, facilitating easy access for prototyping.
- Buttons:
- EN (Reset): Resets the system.
- BOOT: Used to enter the firmware download mode.
- LED Indicators: Power indicator to show the board's operational status.
Guide: ESP32-PICO-KIT-1 - ESP32 - — esp-dev-kits latest documentation
WARNING
