Our Brands

Development Boards

7 - 21
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
23 - 37
Newest Items First
15 Per Page
STM32F030C8T6, Arm Cortex-M0 STM32 Development Board Module with 64 Kbytes of Flash memory, 48 MHz CPU
US$8.87
This is a powerful development MCU board by ARM (STM32F103C8T6) The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
In stock
+ −
Add to wish list
MOD-PLC-8B, 8 Channel 24V to 3.3V PLC Optocoupler Signal Converter
US$16.33
This 8 channel opto-coupled module converts PLC 24 volt signals to 3.3 volt logic levels.
In stock
+ −
Add to wish list
MOD-PLC-8A, 8 Channel 24V to 5V PLC Optocoupler Signal Converter
US$16.33
This 8 channel opto-coupled module converts PLC 24 volt signals to 5 volt logic levels.
In stock
+ −
Add to wish list
WL-T-FPGA-S Lilygo T-FPGA with Lilygo T-FPGA Shield
US$58.92
T-FPGA is an open-source FPGA development board. It is designed for FPGA and embedded system development with an Altera Cyclone IV FPGA, 32MB SDRAM, 8MB SPI Flash, and a MicroUSB port, among other features. Supporting multiple development environments such as Verilog and VHDL, the board is ideal for a wide range of applications such as robotics, automation, and IoT. In addition, the FPGA is special because it has two chips, a wifi Bluetooth ESP32, and an FPGA chip.
In stock
+ −
Add to wish list
WL-T-DISPLAY-TFS T-Display TF Shield for Lilygo T-Display series
US$6.32
The Lilygo T-Display TF Shield is for the Lilygo T-Display Series
In stock
+ −
Add to wish list
WL-T-DISPLAY-S3A Lilygo T-Display-S3 with AMOLED Display Screen Module
US$58.92
T-Display-S3 AMOLED is a display screen module with a 1.91" diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna. Using SPI interface, it is compatible with any microcontroller with SPI capability. The module is equipped with a built-in battery management system, making it a convenient solution for portable applications. The compact size and low power consumption make it ideal for wearable and IoT projects.
In stock
+ −
Add to wish list
WL-T-DISPLAY T-S3 Lilygo ESP32-S3 1.9 inch ST7789 LCD Display Development Board, with pre-soldered pins
US$35.17
The T-Display series has added a new member. It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh]. The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it. This will be the second LILYGO model Display with an acrylic plate fixed. The overall design continues the design of the T-Display series.
In stock
+ −
Add to wish list
WIFI-ESP8266-KIT Weather Station Kit ESP8266 DHT11 BMP180 BH1750FVI OLED Display Module
US$31.62
This is a DYI Weather Station Kit ESP8266 Temperature Humidity Atmospheric Pressure OLED LCD Display Module .
In stock
+ −
Add to wish list
GK-PROMICRO-5V geeekus PRO MICRO 5V 16MHZ ATMEGA32U4-MU Development Board
US$15.42
The geeekus Arduino Pro Micro is an Arduino compatible microcontroller board that is based on the ATmega32u4. This board comes with everything you need to get started: 2 male header strips and a cable to connect to your computer. The geeekus Arduino Pro Micro has 18 digital input/output pins (of which 5 can be used as PWM output), 9 analog input, a 16 MHz crystal oscillator and a micro USB port. Its working voltage is 5V and power is supplied via a micro USB cable and port RAW GND (DC 7-9V).
In stock
+ −
Add to wish list
1566-ADA USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs
US$58.19
USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs.
This is a large-sized rechargeable battery pack used to charge your mobile devices or to power your Raspberry Pi, Arduino or anything else that uses 5V.
In stock
+ −
Add to wish list
BAT-PBB-10K USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs
US$58.19
This is a large-sized rechargeable battery pack used to charge your mobile devices or to power your Raspberry Pi, Arduino or anything else that uses 5V....
Delivery within 2-3 weeks
+ −
Add to wish list
MakePython ESP32 with WROOM
US$24.50

MakePython ESP32 is a powerful, generic Wifi+ BLE MCU module target to MicroPython learners & developers. It is true “breadboard compatible”, with the very detailed pins explanation, it is easy to learn& use. The MakePython ESP32 has 2 optional for users: WROOM(NO PSRAM) and WROVER(8MB PSRAM).

In stock
+ −
Add to wish list
WAVE-24243 ESP32-S3 Microcontroller, 2.4GHz Wi-Fi Development Board, 240MHz Dual Core Processor, ESP32-S3-WROOM-1-N8R8 Module (Standard ver. w/ Pinheader)
US$18.15

The ESP32-S3-DEV-KIT-N8R8 is a compact-size microcontroller development board with multiple digital interfaces. Adopts ESP32-S3-WROOM-1-N8R8 module, which is equipped with a dual-core Xtensa 32-bit LX7 processor with 240MHz running frequency, built-in 512 KB SRAM (TCM) and 8MB PSRAM; Onboard CH343 and CH334 chips for USB and UART development via USB-C port. Compatible with the pinout of ESP32-S3-DevKitC-1 development board, more convenient to use and expand a variety of peripheral modules.

In stock
+ −
Add to wish list
WAVE-24229 100X Industrial Microscope Lens, C/CS-Mount, Compatible With Raspberry Pi HQ Camera
US$30.71
OPTICAL MAGNIFICATION: 0.12X ~ 1.8X. ZOOM RATIO: 15:01. IMAGE FORMAT: 1/2". MOUNT: C/CS (C-CS adapter included). DISTORTION: < -0.1%. OPERATING TEMPERATURE: -20 ~ +80°C.
In stock
+ −
Add to wish list
MOD-CP2102-A, USB Type-A TO UART TTL CP2102
US$5.41
The CP2102 interface converter is a small bridging device for converting TTL serial to USB. It requires minimum PCB space while offering maximum...
In stock
+ −
Add to wish list
7 - 21
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
23 - 37