Our Brands

Development Boards

1 - 12
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
14 - 28
Newest Items First
15 Per Page
5972-ADA Adafruit Switchable USB Type A to C Breakout Board
US$10.69
With this board, you can manually switch each of the 4 wires on or off for a variety of uses: If you want to have a 'charge only' device, simply switch the D+ and D- lines off. For power monitoring, you can do high side (disable the V+ line) or low side (disable the GND line). For tapping into the USB signal, or monitoring the power voltage, keep all the switches on and probe the labelled pads on either side.
In stock
+ −
Add to wish list
PI5-SC1166 Raspberry Pi M.2 HAT for Pi 5
US$22.70
The Raspberry Pi M.2 HAT+ enables you to connect M.2 peripherals such as NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface, supporting fast (up to 500 MB/s) data transfer to and from NVMe drives and other PCIe accessories.
In stock
+ −
Add to wish list
WAVE-2763, 21.5inch Capacitive Touch Display, 1080×1920 Full HD, Optical Bonding Toughened Glass Panel, Supports Raspberry Pi / Jetson Nano (US Plug)
US$353.76
21.5″ Capacitive Touch Display. Industrial Quality, Suitable For Industrial, Commercial, And Medical Applications, Etc.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-27541 PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HAT
US$44.36
PCIe TO GigE & USB HUB HAT. PCIe To Gigabit Ethernet And USB 3.2 Gen1. Designed For Raspberry Pi 5, Driver-Free, Plug And Play.
In stock
+ −
Add to wish list
WAVE-27580 PCIe To M.2 Mini Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Raspberry Pi 5 NVMe HAT
US$10.69
PCIe To M.2 Mini Adapter. Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing.
In stock
+ −
Add to wish list
WAVE-27577 Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
US$31.80
Allows controlling up to 253 ST / RSBL series serial bus servos at the same time. 9~25V wide voltage input (the input voltage and the servo voltage must be matched). Based on the ESP32-WROOM-32 module, supports wired and wireless communication. Provides multiple control demos for different host controllers. Supports controlling the serial bus servos directly via onboard USB Type-C port.
In stock
+ −
Add to wish list
WAVE-27009 Micro HDMI to HDMI Multifunctional Adapter, Compatible with Raspberry Pi 5 / 4B, Two Power Supply Methods, Supports Dual 4K Outputs
US$10.69
Micro HDMI To HDMI Adapter Board. Supports Raspberry Pi 5 & Raspberry Pi 4B, Dual 4K Outputs.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-27523 PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard (Basic kit + 256GB Solid State Drive)
US$72.57
PCIe To M.2 Adapter For Raspberry Pi 5. Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing.
In stock
+ −
Add to wish list
WAVE-27467 2.13inch E-Paper HAT+ For Raspberry Pi, E-Ink Display, 250x122, Immersion Gold Process, SPI Interface, HAT+ Standard, With Pwnagotchi Tutorial
US$27.07
Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws. Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications.
In stock
+ −
Add to wish list
EF04061 ELECFREAKS Octopus Linear Slider Potentiometer Brick
US$8.14
ELECFREAKS Octopus Linear Slider Potentiometer Brick is a type of electronic building block module based on a 10k linear sliding potentiometer. Sliding the potentiometer can change the voltage from 0V to VCC as well as the red LED on and off onboard. It can be used as a resistor potentiometer, HID control panel, and electronic building block kit.
In stock
+ −
Add to wish list
WAVE-27377 MiniPCIe interface to 2-CH CAN Card, Supports Decoding And Analyzing Function of Multiple CAN Protocols, High-performance Hardware Solution
US$127.35
The 2-CH CAN MiniPCIe expands two CAN interfaces, adopts standard MiniPCIe card size and can be easily installed on a laptop or industrial computer with MiniPCIe slot, and integrates two complete CAN isolation interface circuits. Supports Windows and Linux systems, comes with drivers, CANTools related software, secondary development examples and tutorials. Comes with a USB TO MiniPCIe adapter board, for connecting to the PCs or industrial control hosts via USB port to realize transceiver control, data analysis, collection and monitoring of CAN bus network.
In stock
+ −
Add to wish list
WAVE-27466 USB To UART (TTL) Mini Communication Module, Compact Size, Stable Communication, Over-current/Over-voltage Protection, TTL Serial Converter, USB To TTL Converter (Standard version)
US$9.78
Onboard original FT232RNL chip, fast communication, stable and reliable, better compatibility. Castellated holes design, compact size, easy to integrate into the device by soldering UART communication baudrate: 300bps~3Mbps. Onboard self-recovery fuse and ESD diode, provides over-current/over-voltage protection, stable and safe operation. Onboard TXD and RXD indicators for monitoring transceiver status.
In stock
+ −
Add to wish list
WAVE-27479 TTL To RS485 (C) Galvanic Isolated Converter, Half-Duplex Communication, Lightningproof & Anti-Surge, Multi-Isolation Protection
US$11.60
Compatible with TTL/RS485 standard, converting the TTL signal into differential RS485 signal, supports half-duplex communication. Compatible with 3.3V ~ 5V TTL signal level, provides over-voltage protection for power supply interface. Onboard unibody power supply isolation, provides stable isolated voltage and needs no extra power supply for the isolated terminal. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption.
In stock
+ −
Add to wish list
WAVE-27480 PCIe To 2-ch M.2 Adapter for Raspberry Pi 5, Compatible with 2230/2242 Size NVMe Solid State Drive, Raspberry Pi 5 M.2 HAT
US$27.07
Dual NVMe Solid State Drives Support. Compatible With 2230/2242 Size M.2 Solid State Drives. Supports PCIE X1 Gen2 Only, Does Not Support Booting PI5 From Solid State Drive. Onboard Dual LED Indicators, Easy To Monitor The Working Status.
In stock
+ −
Add to wish list
ESP32-DEVKITC-32E, Espressif Systems ESP32-DEVKITC Microcontroller
US$27.25
ESP32-DEVKITC-32E, Espressif Systems ESP32-DEVKITC Microcontroller You want to prototype a new electronic device but don't have the time or money to...
In stock
+ −
Add to wish list
1 - 12
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
14 - 28