WAVE-29371, Waveshare RP2350-Plus Development Board, High-performance Pico-like MCU Board Based On Raspberry Pi RP2350A, with soldered headers
RP2350 MCU Board
a Pico-like MCU board based on Raspberry Pi RP2350A
Compatible with most of the Raspberry Pi Pico Add-On Modules
Specifications:
- RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
- Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
- 520KB of SRAM, and 4MB of on-board Flash memory
- Type-C connector, keeps it up to date, easier to use
- Lithium battery recharge/discharge header, suitable for mobile devices
- Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
- Castellated module allows soldering directly to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 12 × Programmable I/O (PIO) state machines for custom peripheral support
C/C++ MicroPython Support
Dual-Core, Dual-Architecture
Adopts Dual-Core Arm Cortex-M33 Process and Dual-Core Hazard 3 RISC-V Processor, Flexible Clock Running Up To 150MHz
26x Multi-Function GPIO Pins
What's On Board
- LED
user LED (not power indicator) - USB Type-C connector
- ETA6096
high efficiency Lithium battery recharge manager - MP28164
high efficiency DC-DC buck-boost chip - BOOT button
press it when resetting to enter download mode - On-board flash memory
4MB: W25Q32JVSSIQ - RESET button
- RP2350A
Dual-core and dual-architecture design, up to 150 MHz operating frequency - Battery header
MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time - Pinout
compatible with Raspberry Pi Pico 2 - USB test points
connecting to USB interface - BOOT test point
connecting to BOOT button - DEBUG points
Dimensions
WARNING
