WAVE-29394, RP2350-Tiny Development Board, Based On RP2350A Dual-core & Dual-architecture Microcontroller (USB Port Adapter & FPC Cable included)
RP2350-Tiny Development Board
Based On RP2350A, Optional For USB Port Adapter Board
Castellated Module, Suitable for SMD Applications
Specifications:
- RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
- Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
- 520KB of SRAM, and 4MB of on-board Flash memory
- Onboard FPC 8PIN connector, adapting USB Type-C port via adapter board
- Castellated module allows soldering direct to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 28 × multi-function GPIO pins (20× via edge pinout, others via solder points)
- 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 12 × Programmable I/O (PIO) state machines for custom peripheral support
Support C/C++, MicroPython
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
Dual-Core, Dual-Architecture
Adopts Dual-Core Arm Cortex-M33 Processor and Dual-Core Hazard 3 RISC-V Processor, Flexible Clock Running Up To 150MHz
28x Multi-Function GPIO Pins
Configurable Pin Function, Allows Flexible Development and Integration
* Reserved two 0402 resistor pads for user mode selection, you need solder the corresponding resistors or short the pads and complete the corresponding programming.
What's On Board
- FPC connector
0.5mm pitch 8PIN - ME6217C33M5G
Low dropout regulator, 800mA output (Max.) - P25Q32SH-UXH-IR
4MB NOR-Flash
- RP2350A
Dual-core and dual-architecture design, up to 150 MHz operating frequency - WS2812
RGB LED Indicator
Dimensions
WARNING
