Our Brands

Development Boards

103 - 117
111 112 113 114 115 116 117 118 119 120 121 122 123 124 125
119 - 133
Newest Items First
15 Per Page
2143-ADA Flex Cable for Raspberry Pi Camera - 1 meter
US$6.92
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size.
In stock
+ −
Add to wish list
2144-ADA Flex Cable for Raspberry Pi Camera - 2 meters
US$10.42
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size.
Delivery within 2-3 weeks
+ −
Add to wish list
70-ADA FTDI Serial TTL-232 USB Cable
US$27.65
This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels.
Delivery within 2-3 weeks
+ −
Add to wish list
2264-ADA Adafruit FT232H Breakout - General Purpose USB to GPIO+SPI+I2C
US$22.95
This chip from FTDI is similar to their USB to serial converter chips but adds a 'multi-protocol synchronous serial engine' which allows it to speak many common protocols like SPI, I2C, serial UART, JTAG, and more!
Delivery within 2-3 weeks
+ −
Add to wish list
PI-ARD-SENSORS GETTING STARTED WITH SENSORS KIT
US$109.13

This kit teaches you how to connect and read sensors through a series of short projects using the popular Arduino or Raspberry Pi microcontrollers. In the included fully-illustrated book you will gain hands-on experience with some of the most useful and instructive sensors available. Note that Arduino and Raspberry Pi are not included in this kit.

In stock
+ −
Add to wish list
2223-ADA GPIO Header for Raspberry Pi B+ - Extra-long 2x20 Female Header
US$4.38
Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.
In stock
+ −
Add to wish list
2222-ADA GPIO Header for Raspberry Pi B+ - 2x20 Female Header
US$2.63
Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.
In stock
+ −
Add to wish list
2507-POLOLU Dual VNH5019 Motor Driver Shield for Arduino
US$159.92
This makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels.
Delivery within 2-3 weeks
+ −
Add to wish list
DFR0316 MCP3424 18-Bit ADC-4 Channel with Programmable Gain Amplifier
US$22.33
The module integrates MCP3432 A/D converter chip. The module can provide analog input function for Raspberry Pi and provide high accuracy analog input for Arduino.
In stock
+ −
Add to wish list
KIT0011 27 Pcs Sensor Set for Arduino
US$125.93
If you want to start playing with sensors, this kit will be the perfect choice for you to get started. It comes with bundle of the most popular DFRobot sensors such as light, gas, sound, touch, accelerometer and lots more which gives unlimited possibility to sense the physical world on your embedded devices.
Delivery within 2-3 weeks
+ −
Add to wish list
2196-ADA The Raspberry Leaf for Model B+ (Two Pack)
US$4.13
The Raspberry Leaf is a piece of high quality glossy paper that's cut and drilled to to pop over the GPIO pins of your Raspberry Pi B+ and label them for easy connection.
Delivery within 2-3 weeks
+ −
Add to wish list
MR001-004.2 DC Dual Motor Driver 30V 4A V2
US$17.97
This allows to indipendently drive two DC motors, controlling both velocity and direction.
In stock
+ −
Add to wish list
LAB-13110 SparkFun Inventor's Kit Parts Refill Pack
US$34.93

Kit Includes: 5x Mini Photocell, 5x 10k Trimpot, 2x Gear Hobby Motor, 2x Generic Servo (Sub-Micro Size), 2x Bag of 25 10kOhm Resistor, 2x Bag of 25 330Ohm Resistor, 5x 30 Pack of Jumper Wires, 10x 1N4148 Diode, 1x Assorted LED (20 Pack) - (5 Red, 5 Blue, 5 Yellow, 5 Green). 1x Simon Buttons (4 Pack) - (1 Red, 1 Blue, 1 Yellow, 1 Green).

In stock
+ −
Add to wish list
DEV-12935 FTDI SmartBasic
US$39.13
The FTDI SmartBasic is a variation on our classic FTDI Basic board which allows you to connect a second device to the hardware serial port on an Arduino Pro, Pro Mini, or other USB-less board without compromising the ability to bootload code from the Arduino IDE.
In stock
+ −
Add to wish list
2130-ADA Mono 2.5W Class D Audio Amplifier - PAM8302
US$16.35
This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC.
In stock
+ −
Add to wish list
103 - 117
111 112 113 114 115 116 117 118 119 120 121 122 123 124 125
119 - 133