Our Brands

Development Boards

85 - 99
93 94 95 96 97 98 99 100 101 102 103 104 105 106 107
101 - 115
Newest Items First
15 Per Page
ETEX-01 Wearable Conductive Sewing Thread 1M
US$1.99
This thread is a stainless steel conductive thread suitable for sewing wearable projects with the Arduino Lilypad. Specifications: 1m, Stainless steel, 15g, Silver color.
In stock
+ −
Add to wish list
ARD-W5100 Mini LAN Ethernet Shield Module Board W5100
US$36.17
This is a miniature break-out board shield with Ethernet network connection for connection projects to the internet. Compatible with Arduino Ethernet library. W5100 is a versatile single-chip network interface with internal integration 10/100 Ethernet controller. It is ideal for use in high integration, high stability, high performance and low cost embedded systems applications. Using W5100 can provide internet connection for the operating system. W5100 is compatible with IEEE802.3 10 base-t and 802.3 u 100 base - TX. W5100 has complete internal integration of the whole system: TCP/IP protocol stack, Ethernet medium transport layer (MAC) and physical layer (PHY). Using W5100 don't need to consider the control of Ethernet, only need for a simple port (Socket) programming.
In stock
+ −
Add to wish list
AM-138 ADS1015 12-Bit Precision Analog-to-Digital Converter I2C Breakout Board
US$17.86
The following module is an Analog-to-Digital module that complements any system lacking ADC conversion. It provides a 12-bit precision conversion for up to 4 different multiplexed single ended analog inputs or 2 differential analog inputs. It can be setup in either single-shot (powers down after one sample conversion) or continuous mode (continuously converts samples). This board can run on 2VDC to 5.5VDC and it doesn’t need a Voltage reference to be supplied to it as it uses an internal reference. The configurable sample rate of the chip can reach as high as 3300 SPS and as low as 128 SPS.
In stock
+ −
Add to wish list
AM-139 ADS1115 16-Bit Precision Analog-to-Digital Converter I2C Breakout Board
US$18.77
The following module is an Analog-to-Digital module that complements any system lacking ADC conversion. It provides a 16-bit precision conversion for up to 4 different multiplexed single ended analog inputs or 2 differential analog inputs. It can be setup in either single-shot (powers down after one sample conversion) or continuous mode (continuously converts samples). This board can run on 2VDC to 5.5VDC and it doesn’t need a Voltage reference to be supplied to it as it uses an internal reference. The configurable sample rate of the chip can reach as high as 860 SPS and as low as 8 SPS.
In stock
+ −
Add to wish list
AM-137 4 Way I2C Bi-Directional Logic Level Converter 5VDC/3.3VDC for Microcontrollers and Modules
US$3.07
This module works very well with any I2C projects you are working on. It will convert any 5VDC logic level to a 3.3VDC logic level and any 3.3VDC logic level to a 5VDC logic level. The four level conversion modules on the board allow it to do so for up to four different data channels. It is very practical for any system composed of incompatible I2C modules as it enables them to be compatible and communicate without a problem. It is also very easy to setup due to the pins being identifiable on the board. Just make sure to connect your High level reference to “HV” and to connect your Low level reference to “LV” (they both have their respective ground plains).
In stock
+ −
Add to wish list
Pytrack IoT Tracking Board from Pycom
US$40.90
Pytrack IoT Tracking Board easily fits any of the Pycom dev boards.Imagine a sensor shield which you can use with any of your Pycom multi-network modules! This is what we give you with Pysense and Pytrack – a leg up to get you off to a great start really quickly. NOTE: Does not include the LoPy. Features: Super accurate GNSS + Glonass GPS. 3 axis 12-bit accelerometer. USB port with serial access. LiPo battery charger. MicroSD ard compatibility. Ultra low power operation (~1uA in deep sleep).
In stock
+ −
Add to wish list
Pysense Sensor Board from Pycom
US$31.80
Pysense is a 5 Sensor Board that easily fits any of the Pycom Sensor Boards.Imagine a sensor shield which you can use with any of your Pycom multi-network modules. This is what we give you with Pysense and Pytrack – a leg up to get you off to a great start really quickly. These little fellows fit all Pycom boards and each contain a number of sensors. NOTE: LoPy is not included.
In stock
+ −
Add to wish list
ARD-619 Speed & Voice Recognition Module V3
US$46.19
This Voice Recognition Module is a compact and easy-control speaking recognition board. This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Any sound could be trained as command. Users need to train the module first before let it recognizing any voice command. This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized.
Delivery within 2-3 weeks
+ −
Add to wish list
SKU-0018 Bare Conductive Electric Paint 10ML
US$24.52

Design, discover, create. Your design and electronics projects are about to change forever. Paint circuits and sensors, or use Electric Paint as a conductive adhesive on almost anything including paper, plastic, textiles and conventional electronics. Put this flexible, revolutionary little tube in your toolbox today.

In stock
+ −
Add to wish list
5V Cooling Fan for Raspberry Pi 4
US$3.49
This fan is specifically designed for Raspberry Pi and can be mounted on some acrylic cases. The fan is useful for projects where heatsinks just aren't cutting it. Protect your hardware with a low power fan. The greatest feature of this fan is its low power consumption (20mA @ 5VDC). This fan attaches directly to the RPi GPIO and requires no additional power source or relay circuit.
In stock
+ −
Add to wish list
5V/3.3V 2-way Breadboard Power Supply Module for Arduino
US$3.99
Are you working on a project with both 5V and 3.3V devices? Is your breadboard getting cluttered? This wonderful 2-way breadboard module solves all your problems. This unit connects comforatbly onto any breadboard and takes very little space. The power busses are clearly divided, the voltage output is clean and allows all your devices top run at their optimal level. The unit accepts power from both USB and DC connection and easily switches from 5V to 3.3V lines.
In stock
+ −
Add to wish list
PSM-297 Solderless Breadboard 3.3V/5V Power Supply Module for Arduino
US$3.99
Are you working on a project with both 5V and 3.3V devices? Is your breadboard getting cluttered? This wonderful 2-way breadboard module solves all your problems. This unit connects comforatbly onto any breadboard and takes very little space. The power busses are clearly divided, the voltage output is clean and allows all your devices top run at their optimal level. The unit accepts power from both USB and DC connection and easily switches from 5V to 3.3V lines using jumpers.
In stock
+ −
Add to wish list
PI-MIC USB Plug Mini Microphone for Raspberry Pi
US$6.99
Say goodbye to traditional microphones that are bulky and require drivers and hardware, and say hello to this new lightweight simple mini design! This microphone is completely plug-and-play into any device with USB ports (desktop, laptop, Raspberry Pi) The microphone is compact and discrete and is very suitable for recording, Skype and video gaming.
In stock
+ −
Add to wish list
WAVE-157 True color RGB LED HAT for Raspberry Pi, colorful display
US$15.39
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin. Features: Supports any revision of Raspberry Pi (directly-pluggable). Onboard 4 × 8 RGB LED (WS2812B). Control pin is configurable via jumpers (0Ω resistor). Comes with development resources and manual (examples in Python and Web control).
In stock
+ −
Add to wish list
WAVE-12694 USB HUB HAT for Raspberry Pi 4 Port
US$13.42
This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what's more, it features USB to UART converter for easy serial communication. It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W.
In stock
+ −
Add to wish list
85 - 99
93 94 95 96 97 98 99 100 101 102 103 104 105 106 107
101 - 115