Our Brands

Electromechanical

119 - 133
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141
135 - 149
Newest Items First
15 Per Page
EF04031 Octopus Passive buzzer Brick OBPB01
US$4.50
Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection are prepared to extensive modules like poteniometers, sensors, relays, servos even buttons, just plug and play.  Octopus Passive buzzer Brick is based on a passive buzzer, it could control the volume by PWM. The distinction is active buzzer stickers.
In stock
+ −
Add to wish list
OCTOPUS 1Channel Relay
US$6.29
OCTOPUS 1Channel Relay is a single relay electronic brick，and its basic design is based on OCTOPUS series products, like shape, PCB positioning holes, interface setting. Adopting Ultra-small, high-quality HUIKE relay, OCTOPUS 1Channel Relay can control various appliances, load high-current, also with opto-isolation, secure and dependable, so Lovers of electronics DIY commonly used it as accessory module. The module is 5V high level trigger, and the trigger current is about 5mA, so almost all of MCU can directly drive it, pull-up not needed.
In stock
+ −
Add to wish list
MAX14870 Single Brushed DC Motor Driver Carrier
US$22.52
This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature.
In stock
+ −
Add to wish list
Aluminium Alloy 37mm 37GB(GA) Geared Motor Bracket with Screws
US$4.50
This is a JGA25-370 motor corner bracket. It allows you to mount your motor firmly to your robotic chassis. It is great for DIY kits for schools or any JGA25 related project.
In stock
+ −
Add to wish list
L-Clamp Bracket for 25GA Gear Motor
US$6.99
It’s an L-shaped motor bracket suitable for JGA25-370 type of gear motors. The package includes one L-bracket with screws.
In stock
+ −
Add to wish list
Fuse Clip with ears PCB for 5mm. fuses
US$0.20
Fuse clip with ears PCB mount for 5mm. fuses, rated for 10 Amperes. Price per each fuse clip. Fuses sold separately.
In stock
+ −
Add to wish list
C&K Slide Switch SP3T ON-ON-ON
US$0.99
This C&K quality switch is a single pole triple throw slide switch that provides ON-ON-ON contacts. Termination pins are for PCB mounting.
In stock
+ −
Add to wish list
17HS4023 Nema 17 42x42x24mm 0.7A Bi-Polar Dual Phase 1.8° Stepper Motor (Pancake Motor)
US$19.95
17HS4023 Bi Polar stepper motors are used very commonly in a lot of 3D printers and RepRap CNC machines. It can also be used in general control machinery, automation and robotics applications. A NEMA 17 stepper motor is a stepper motor with a 1.7 x 1.7 inch (42.3 x 42.3 mm) faceplate. The motor conveniently connects via a typical 6 pin JST connector. This unit comes with a 6-pin female JST to 4 pin female header cable.
In stock
+ −
Add to wish list
RL-LY2NJ-24V Relay DPDT 24V 10A with Base and LED Indicator
US$7.98
This is a convenient combination of  a DPDT 10 ampere relay and screw terminal base for electronic installations.
In stock
+ −
Add to wish list
RL-LY2NJ-12V Relay DPDT 12V 10A with Base and LED Indicator
US$7.98
This is a convenient combination of 10 amp relay and screw terminal base for electronic installations.
In stock
+ −
Add to wish list
SPDT IP67 Waterproof 12VDC Illuminated 5-Switches Panel with Mounting Screws
US$19.94
This is 5-waterproof-switches panel that can be mounted in your boat, car or any place where you need five switches to be mounted neatly.
In stock
+ −
Add to wish list
6V 280RPM DC Motor with Encoder with Mounting Bracket and 65mm Wheel Kit
US$27.25

Into robotics? Great, get one of these! This kit consist of a JGA25-370 high torque motor with encoder (allows for accurate feedback positioning) along with a mounting bracket and all the necessary hardware to attach the 4mm shaft into the wheel.

Delivery within 2-3 weeks
+ −
Add to wish list
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
US$17.92
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously without a heat sink or forced air flow (up to 4.5 A peak).
Delivery within 2-3 weeks
+ −
Add to wish list
DC Gear Motor w/ Double Axle
US$3.74
This DC gear motor with a double axle is perfect for the beginner hobbyist venture into motorized robotic platforms. Comes assembled with a worm gear drive coupling to the double axle making for a simple addition to mobilize a basic platform. The motor can be driven with 3 or 6 volts DC.
In stock
+ −
Add to wish list
STSPIN820 Stepper Motor Driver Carrier (Header Pins Soldered)
US$13.96
This version of our STSPIN820 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.
In stock
+ −
Add to wish list
119 - 133
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141
135 - 149