LoRa

1 2
US$34.92
This is the LoRa 9x @ 900 MHz radio version, which can be used for either 868MHz or 915MHz transmission/reception - the exact radio frequency is determined when you load the software since it can be tuned around dynamically. These are +20dBm LoRa packet radios that have a special radio modulation that is not compatible with the RFM69s but can go much much farther. They can easily go 2 Km line of sight using simple wire antennas, or up to 20Km with directional antennas and settings tweakings.
In stock
+
Add to wish list

US$4.19
This is the antenna suitable for Lora RA-02 Development board. It works at the 433MHz frequency and comes with IPEX connector.
In stock
+
Add to wish list

US$47.45
This product is a SX1278 chip based on ESP32 WIFI with OLED, namely LoRa remote modem operating at 433Mhz and having high reliability. Comes with a micro USB slot and Li-Po battery. LoRa has a long distance range and is compatible to all Arduino development environment boards. The board consist of 4 MB (32 M bit)wi-fi antenna, 0.96 inches blue OLED display, lithium battery charging circuit, CP2102 interface and USB serial chip. It can also be used for program checking and product development is very easy and fast.
In stock
+
Add to wish list

US$18.15
The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.
In stock
+
Add to wish list

US$48.91
This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the high power requirements of WiFi.
In stock
+
Add to wish list

US$30.73
Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren't so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can't send data as fast but you can send data a lot farther.'
Delivery within 2-3 weeks
+
Add to wish list

US$30.73
Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren't so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can't send data as fast but you can send data a lot farther.'
In stock
+
Add to wish list

US$12.25
DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There are three types of FireBeetle, containing Boards (main control), Covers (expansion boards) and related Accessories. FireBeetle Covers-Gravity I/O Expansion Shield is an adapter for Gravity sensors and modules. With this shield, you can achieve convenient connection between Gravity sensors and FireBeetles. Every sensor will have its independent power pins.
In stock
+
Add to wish list

US$49.82
An AC Dimmer is used to control the AC cycle. Normally, a dimmer is used to turning the power ON/OFF for lamps or heating elements, it can also be used in fans, pumps, air cleaners, etc. Makerfabs Lora AC Dimmer chopper circuit is based on Triac BT139, and zero-cross checking circuit, it detects the zero-cross points and then the Triac controlled to chop the AC. Besides, to avoid the problem of AC can not be totally shunted off with Triac, a relay is implemented to make the AC totally On/Off. On-board AC/DC module implemented, so no external power supply needed, suitable for field applications.
In stock
+
Add to wish list

US$36.17
The LoRa Radio Node V2.0 based on the ATmega328P and RFM98 433Mhz radio module.
In stock
+
Add to wish list

US$63.56
The STM32 board has all the functions required for IOT. But these newly introduced TTGO boards are different from the previous. These are embedded with the STM32 chip with SX1276 which allows it to work with LoRa technology via SMA connected antenna. You can program this board using the Arduino environment. For code please refer to the link below.
In stock
+
Add to wish list

US$27.07
This is a mainboard based on the ATmega328 microchip and Lora Module designed for ultra-long-range, high interference immunity and low rate data transfer. Perfect for IoT projects.
In stock
+
Add to wish list

US$40.72
Makerfabs Lora TDS sensor monitors the water status, includes TDS/ temperature, and send the data remotely via Lora, to create a local Lora network, so users can easily create multiple TDS node and process/display them in one Lora server, suitable for applications that need multiple TDS monitor.
In stock
+
Add to wish list

US$31.80
The OPHMALORA is a module that allows you to connect your projects wireless to the internet in regional, national or global networks with the LoRaWAN networking protocol.
In stock
+
Add to wish list

US$15.24
The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. It’s perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.
In stock
+
Add to wish list

US$13.94
LoRa Technology is the DNA of IoT, connecting sensors to the Cloud and enabling real-time communication of data and analytics that can be utilized to enhance efficiency and productivity.
In stock
+
Add to wish list

US$34.99

This is a LoRa Node end device that is based on the STM32L151CBU6, which is an ultra low-power MCU based on ARM Cortex M3 Architecture. It also comes with a 433MHz module that is capable of LoRa based communication and a 433MHz antenna!

In stock
+
Add to wish list

US$36.39
This is a Raspberry Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
In stock
+
Add to wish list

US$79.75
LoRa Radio Module is a type of long range low data rate data radio modem based on Sx1276 from Semtech. It is a low-cost sub-1 GHz transceiver module designed for operations in the unlicensed ISM (Industrial Scientific Medical) and LPRD bands. Frequency spectrum modulation/demodulation, multi-channel operation, high bandwidth efficiency and anti-blocking performance make LoRa modules easy to realize the robust and reliable wireless link. The module can work in two different modes: Standard mode and Star network mode. In the standard mode It acts as transparent data radio modem which it communicates with the host at the preset data format without encoding / decoding needed. In start network mode, one module will be the configured to the central node and other modules are set to node modules. The communication between the central module and node module are bidirectional but the node modules can not talk with each other. Please note that the module doesn't contain lorawan protocol. Therefore the star network feature of this module is used with itself protocol so it is not compatible with lorawan.
In stock
+
Add to wish list

US$31.25
DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main control), Covers (expansion boards) and related Accessories.  FireBeetle LoRa 433MHz wireless transmission module adopts a high-performance chip SX127x LoRa 433MHz and with built-in PA (power amplifier) gain, compatible with Aruino. It supports long-range monitor, FSK modulation and the maximum transmission rate is 300K[null bps]. It also supports LoRaTM, the maximum transmission rate is 37.5Kbps. The circuit current is even lower than 0.2uA in the low power mode. It can be widely used in remote home automation detection, health monitoring and wearable device and so on.
In stock
+
Add to wish list

US$31.25
DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main control), Covers (expansion boards) and related Accessories.  FireBeetle LoRa 915MHz wireless transmission module adopts a high-performance chip SX127x LoRa 915MHz and with built-in PA (power amplifier) gain, compatible with Aruino. It supports long-range monitor, FSK modulation and the maximum transmission rate is 300K[null bps]. It also supports LoRaTM, the maximum transmission rate is 37.5Kbps. The circuit current is even lower than 0.2uA in the low power mode. It can be widely used in remote home automation detection, health monitoring and wearable device and so on.
In stock
+
Add to wish list

US$14.51
The WAVE-20855 is a module that incorporates the SX1262 chip. It can be used as an application node. it's small, but it packs quite a punch with long-range transmission and high anti-interference capabilities.
In stock
+
Add to wish list

US$14.51
Core1262 HF LoRa Module, SX1262 Chip, Long-Range Communication, Anti-Interference
In stock
+
Add to wish list

US$172.67
WAVE-22613, SX130x 915M LoRaWAN Gateway Module With HAT for Raspberry Pi, Standard Mini-PCIe Socket, Long Range Transmission
In stock
+
Add to wish list

US$40.72
Rail-Mount SX1262 LoRa DTU. RS232 / RS485 / RS422 To LoRa. Suitable for data acquisition in industry and agriculture.
In stock
+
Add to wish list

US$27.25

The Waveshare 24515 USB to LoRa Data Transfer Module with TCXO Crystal Oscillator is based on the SX1262 and is suitable For Data Acquisition In Industry And Agriculture. This HF version is 850~930MHz frequency for Europe, America and Oceania.

In stock
+
Add to wish list

US$22.70
RP2040-LoRa is a LoRa development board using the new generation of SX1262 RF chip, provides better performance than the SX127X series in power consumption, communication distance and power efficiency. Adopts LoRa modulation technology to solve the problem in the traditional design solutions which can not balance distance, anti-interference, and power consumption at the same time. Combines with LoRa gateway for connecting Cloud Server such as TTN and ChirpStack for quick verification.
In stock
+
Add to wish list

US$63.65
Welcome to the ultimate remote communication development board! This board has everything you can think of for your IoT project; from ESP32 Microcontroller, LoRa long distance communication, global positioning system to USB functionality and even a holder for a rechargable 18650 battery!
In stock
+
Add to wish list

US$11.78
The SX1278 transceivers feature the LoRa® long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
 
In stock
+
Add to wish list

US$10.95
The Ra-02 is a wireless transmission module based on SEMTECH's SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption. Can be covering thousands of people in the district environment, particularly suitable for meter reading, smart home, burglar alarm equipment etc...
In stock
+
Add to wish list

US$16.98
LoRa is a promising low-power, long-range wireless transmission protocol based on SX1278 developed by SEMTECH as part of the emergence of the Internet of Things (IoT). Simply put, it is a method for sending data separate from WiFi, Zigbee or Bluetooth. This module is a long-range transceiver on an Arduino module form factor and based on Open source library. The UART LoRa wireless module allows the user to send data and reach extremely long ranges at low data-rates(up to 10 km). It provides a ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption. The UART LoRa wireless module targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on. For more details please refer to the attached manual.
In stock
+
Add to wish list

US$45.45
This is a TTGO ESP32 SX1276 LoRa 868 / 915MHz bluetooth WIFI Lora Internet Antenna Development Board.
In stock
+
Add to wish list
1 2