Our Brands

USB Adapters/Cables/Hubs/Other

1 2
Sort Alphabetically: Z to A
128 Per Page
WAVE-26011 Industrial USB To RS232 Serial Adapter Cable, USB Type A To DB9 Male / Female Port, Original FT232RL Chip, Cable Length 1.5m (USB To RS232 Female Port)
US$15.42
Industrial USB To RS232 Serial Adapter Cable, Adopts Original FT232RL Chip, Provides Stable Communication, Ideal Choice For Industrial Control Equipments And/Or Applications With High Communication Requirement
In stock
+ −
Add to wish list
WAVE-26010 Industrial USB To RS232 Serial Adapter Cable, USB Type A To DB9 Male / Female Port, Original FT232RL Chip, Cable Length 1.5m (USB To RS232 Male Port)
US$15.42
Industrial USB To RS232 Serial Adapter Cable, Adopts Original FT232RL Chip, Provides Stable Communication, Ideal Choice For Industrial Control Equipments And/Or Applications With High Communication Requirement.
In stock
+ −
Add to wish list
WAVE-24211 USB Port High Definition HDMI Video Capture Card, for Gaming / Streaming / Cameras, HDMI to USB (USB 3.0 Version)
US$27.25
USB Port High Definition HDMI Video Capture Card, for Gaming / Streaming / Cameras, HDMI to USB (USB 3.0 Version) USB HD Video Capture Card ...
In stock
+ −
Add to wish list
WAVE-23635, USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working Modes, Multi-system Compatible
US$31.80
Supports CAN2.0A (standard frame) and CAN2.0B (extended frame). CAN baud rate is configurable in the range of 5Kbps-1Mbps. Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode. Supports multiple CAN data sending modes: single frame, multiple frames, manually, regularly and cyclic sending. Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID, or specify ID to automatically answer the configured data.
In stock
+ −
Add to wish list
WAVE-23322, USB Type-C Male To USB-A Female Adapter
US$4.50
USB Type-C Male To USB-A Female Adapter Dimensions:
In stock
+ −
Add to wish list
WAVE-22862, Industrial Grade Multifunctional USB HUB, Extending 3x USB Ports + 100M Ethernet Port With Power Supply
US$27.25
WAVE-22862, Industrial Grade Multifunctional USB HUB, Extending 3x USB Ports + 100M Ethernet Port With Power Supply
In stock
+ −
Add to wish list
WAVE-22764, Industrial Grade USB HUB, Extending 7x USB 2.0 Ports With Power Supply
US$35.90
WAVE-22764, Industrial Grade USB HUB, Extending 7x USB 2.0 Ports With Power Supply
In stock
+ −
Add to wish list
WAVE-21380, Industrial Grade USB HUB, Extending 4x USB 2.0 Ports, Switchable Dual Hosts
US$27.07
The WAVE-21380 is an industrial-grade USB HUB with up to 4 connections and two hosts. It uses MTT technology to allow for smooth and stable connections. It also carries plenty of protection modules to keep your devices safe.
In stock
+ −
Add to wish list
WAVE-20734, Industrial Grade USB HUB, Extending 4x USB 2.0 Ports
US$25.16
The WAVE-20734 is an industrial-grade USB HUB with up to 4 connections. It uses MTT technology to allow for smooth and stable connections. It also carries plenty of protection modules to keep your devices safe.
 
In stock
+ −
Add to wish list
USBFAB-6 USB Cable type USB A male - USB B Male 6 FT
USBFAB-6 USB Cable type USB A male - USB B Male 6 FT
US$6.99
This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that's usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.
In stock
+ −
Add to wish list
USBFAB-3 USB Cable type USB A male - USB B Male 3 FT
USBFAB-3 USB Cable type USB A male - USB B Male 3 FT
US$6.29
This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that's usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.
In stock
+ −
Add to wish list
USBFAB-25 USB Cable type USB A male - USB B Male 25 FT
USBFAB-25 USB Cable type USB A male - USB B Male 25 FT
US$27.93
This is a 25 foot USB 2.0 extension cable issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that's usually used for printers.
Delivery within 2-3 weeks
+ −
Add to wish list
USBFAB-10 USB Cable type USB A male - USB B Male 10 FT
USBFAB-10 USB Cable type USB A male - USB B Male 10 FT
US$9.79
This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that's usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.
In stock
+ −
Add to wish list
USB3.0 A to Micro B OTG Adapter
US$3.91
This is a USB A to USB Micro B Adapter that allow you to connect any USB A peripherals to a Micro USB devices.
In stock
+ −
Add to wish list
USB3-A-MicroB-6 USB 3.0 Male Type "A" to Micro USB "B" Male - 6 Ft.
USB3-A-MicroB-6 USB 3.0 Male Type "A" to Micro USB "B" Male - 6 Ft.
US$9.79
This USB super speed cable allows you to connect hubs and peripherals such as printers, scanners, storage drives, PDA, GPS and other portable devices with the new Micro-B USB port.
In stock
+ −
Add to wish list
USB2-06-AA-EXT USB Extension Cable USB A male to USB A female 6 FT
USB2-6-AA-MF-EXT USB Extension Cable USB A male to USB A female 6 FT
US$6.99
This is a 6 foot USB extension cable type USB A Male to USB A Female.
In stock
+ −
Add to wish list
USBFAA-3 USB Extension Cable USB A male to USB A male 3 FT
USB2-3-AA-MM-EXT USB Cable Extension USB A male to USB A male 3 FT
US$5.99
This is a 3 foot USB extension cable type USB A Male to USB A Male.
In stock
+ −
Add to wish list
USB2-1-AA-MF-PM, Panel Mount USB 2.0 Male to Female extension - 1m
US$2.27
These extension cables have a type A male connector on one end that plugs into any computer. The opposing end has a panel mount female type A connector allowing a second USB cable to be inserted. This allows as many cables to be daisy-chained together as needed.
In stock
+ −
Add to wish list
USB2-1-AA-MF USB 2.0 Male to Female extension - 30cm
US$1.81
These extension cables have a type A male connector on one end that plugs into any computer. The opposing end has a female type A connector allowing a second USB cable to be inserted. This allows as many cables to be daisy-chained together as needed. May come in White or Black.
In stock
+ −
Add to wish list
USB-PARALLEL USB A Male to Centronics 36 Pin Male 6 FT
USB-PARALLEL USB A Male to Centronics 36 Pin Male 6 FT
US$48.99
A 6 foot cable that allows USB capability for any PCs to print to any standard parallel printer, converting a USB port into a Centronics (male) connector for direct connection to a parallel printer. The USB interface provides a much faster data transfer rate, thereby reducing the time waiting for a print job to be sent to your printer.
Delivery within 2-3 weeks
+ −
Add to wish list
USB-OTG OTG/USB 2.0 Card Reader for Smart Phone
US$6.99
This fantastic OTG USB (On-the-go) reader makes connecting devices to and from your smart phone extremely simple. Make your phone a host and attach cameras, mouse, keyboards and even SD/TF cards to it. Alternatively, connect your phone to a computer and it acts as a mass storage device to back up files. This product is greater for developers and the type of people who always have a bag full of gadgets. Easily attaches to smart phone case when not in use No external power required.
In stock
+ −
Add to wish list
USB-CR-M1 Mini USB MicroSD card reader
US$4.50
Small MicroSD card reader that plugs directly into a USB port, and supporting up to 32GB cards. Perfect for collecting data from dataloggers.
In stock
+ −
Add to wish list
USB-CR-M Mini USB MicroSD card reader
US$3.95
Small MicroSD card reader that plugs directly into a USB port, and supporting up to 32GB cards. Perfect for collecting data from dataloggers.
In stock
+ −
Add to wish list
USB-C-KIT-100 10 Sets Assorted USB-C Connectors kit, 100 pcs
US$17.97
This is an assortment of 16 different board modules each with an individual USB connector such as: type-A, type-B, type-C, Miniature and Micro.
In stock
+ −
Add to wish list
USB Type-C to USB Type-C Male-to-Male Cable - 1M
US$5.99

This USB Type-C cable is capable of handling 20V, 3A, 60W and can be used for fast charging. The cable length is 1 meter ( 39 inches) and it is protected by a braided nylon sleeve.

In stock
+ −
Add to wish list
USB Type-C to USB Type-C Male-to-Male Cable - 1M
US$19.95
This USB Type-C cable is capable of handling 20V, 5A, 100W and can be used for fast charging. The cable length is 1.5 meter ( 59 inches ) and it is protected by a braided nylon sleeve.
In stock
+ −
Add to wish list
USB Type-C Female to Male USB Micro Type-B
US$2.49
A tiny adapter that can allow you to carry a USB Type-C cable and convert into USB Micro Type-B when you really need it in a pinch.
In stock
+ −
Add to wish list
USB Type-C Female to Male Apple Lightning Adapter
US$2.49
A tiny adapter that can allow you to carry a USB Type-C and convert into Apple Lightning when you really need it in a pinch.
In stock
+ −
Add to wish list
USB TYPE C Female Socket, with through-hole pins and SMD pads.
US$1.39

This is a female type C socket that has through-hole pins and SMD pads to solder, along with some mounting pegs for structural support

In stock
+ −
Add to wish list
USB RS232 to RJ11 Conversion Cable for Stepper/Servo Drive
US$27.07
This is an USB to RS232 to RJ11 cable adaptor. It uses an FTDI FT232 chip to convert USB signals to RS-232 Serial which is accessible at the RJ11 male connector.
In stock
+ −
Add to wish list
USB Mini B Jack to USB A Jack Round Panel Mount Adapter
US$11.60
If you need to add a panel-mount connection for USB Mini B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing required. Un-screw the plastic nut, insert the plug and re-attach. Ta-da! Now you have a Mini B jack to a USB A jack adapter!
In stock
+ −
Add to wish list
USB Mini B Female through-hole socket Connector
US$0.55

This is a female mini B USB connector that has through-hole pins and mounting pegs.

In stock
+ −
Add to wish list
USB Micro Phone Charger Cable - 1M
US$3.91
This is a handy charger cable for your electronic equipment such as cell phones and prtable devices that have a micro USB charging port. Uses the 5 volts on the USB connection from your computer to charge your device battery.
In stock
+ −
Add to wish list
USB Micro B Female Socket with through-hole pins
US$0.55

This is a female Micro B socket that has through-hole pins to solder, along with some mounting pegs for structural support.

In stock
+ −
Add to wish list
USB Cable with Switch
US$5.75
Comes with a USB A socket on one end and a USB A plug on the other. In between is an in-line switch that is rated for 2 Amps. The data lines are not connected through - this is a ground/5V power switch only! The switch is on the positive 5V line.
In stock
+ −
Add to wish list
USB Cable 10 feet type A Male to Male
US$7.99
USB2-10-AA-MM-EXT USB Cable 10 feet type A Male to Male
In stock
+ −
Add to wish list
USB Cable 10 feet type A Male to Female
US$7.99
USB2-10-AA-MF-EXT USB Cable 10 feet type A Male to Female
In stock
+ −
Add to wish list
USB C to USB C Cable - USB 3.1 Gen 4 with E-Mark - 6" long
US$13.09
USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has inserted USB correctly the first time? Works great with any device that has a USB C port.
Delivery within 2-3 weeks
+ −
Add to wish list
USB C to USB C Cable - USB 3.1 Gen 4 with E-Mark - 1 meter long
US$15.33
As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs! USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has inserted USB correctly the first time? Works great with any device that has a USB C port.
In stock
+ −
Add to wish list
USB C to 3.5mm Audio Jack
US$2.49
If you have those new smartphones that are missing the tried and tested 3.5mm audio jacks, you can use this device adapter to convert USB C to the famed 3.5mm audio jack.
In stock
+ −
Add to wish list
USB C Round Panel Mount Extension Cable - 30cm
US$15.33
If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB C Round Panel Mount Extension Cable is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing required. Un-screw the plastic nut, insert the plug and re-attach. Ta-da! Now you have a USB C jack and USB C plug for connecting any cable.
Delivery within 2-3 weeks
+ −
Add to wish list
USB B Round Panel Mount Extension Cable - 30cm
US$9.16
If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB B Round Panel Mount Extension Cable is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing required. Un-screw the plastic nut, insert the plug and re-attach. Ta-da! Now you have a USB B extension cable!
In stock
+ −
Add to wish list
USB B Jack to USB A Jack Round Panel Mount Adapter
US$11.60
If you need to add a panel-mount connection for USB B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing required. Un-screw the plastic nut, insert the plug and re-attach. Ta-da! Now you have a USB B jack to a USB A jack adapter!
In stock
+ −
Add to wish list
USB A Jack to Micro USB B Jack Round Panel Mount Adapter
US$11.60
If you need to add a panel-mount connection for Micro USB, but don't have the time or ability to cut a custom oval or square hole, this USB A Jack to Micro USB B Jack Round Panel Mount Plug is the easiest and fastest way to panel-ify your existing kit. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing required. Un-screw the plastic nut, insert the plug and re-attach. Ta-da! Now you have two HDMI sockets on either side for connecting any cable.
In stock
+ −
Add to wish list
USB 3.0 to HDMI Conversion Cable
US$19.99
This is a USB 3.0 to HDMI Display Adapter acts as an external video card for your Mac or PC.
Delivery within 2-3 weeks
+ −
Add to wish list
USB 3.0 A to Type C Adapter
US$3.91
This is a USB A to USB C Adapter that allow you to connect any USB A peripherals to a USB C devices.
In stock
+ −
Add to wish list
USB 2.0 Type C Cable - 1 Meter (Data and Power)
US$4.99
This is a USB C cable that you normally find on new android and apple devices. This cable is designed to deliver up to 1 Amps, it can transfer data or charge your device.
In stock
+ −
Add to wish list
US2AB56 USB A to Mini B Cable, 6ft
US2AB56 USB A to Mini B Cable, 6ft
US$5.49
This is a USB 2.0 type A to Mini-B 5-pin cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. You can use this with our LiPo Charger, FTDI Basic Programmer or even combine it with the CP210x IC and SMD Mini-B connector to create your own portable USB device!
In stock
+ −
Add to wish list
Snap-In Panel Mount Cable - USB C Socket to USB A Plug
US$9.17
This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB A plug connector, and other is a USB C socket with special over-molding.
Delivery within 2-3 weeks
+ −
Add to wish list
PL2303HX USB-UART Convertor with Cable
US$4.99
It's a small USB to TTL serial tool, based on the PL2303 chip. You can use it to connect some serial device to your PC via USB port. It provides 4-wire, 5V TTL serial interface.
In stock
+ −
Add to wish list
PI2-SWITCH Micro USB Cable w/ Switch for Raspberry Pi
US$7.49

Just hook up the standard USB end to 5V 2A USB port power supply ( like ABRA's DC-5200-USB) and the Micro B end to a Raspberry. No need to unplug your Raspberry Pi; just use the on/off switch on the cable. Can be used for any single-board computer with a Micro USB connection.

In stock
+ −
Add to wish list
Panel Mount USB-B to Micro-B Cable - 6"
US$4.53
This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 28.5mm apart.
In stock
+ −
Add to wish list
Panel Mount USB Micro-B Extension Cable - 6"
US$3.86
This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 16.5mm apart.
In stock
+ −
Add to wish list
Panel Mount Cable USB C to Type A - 30cm
US$7.63
This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB Type A plug connector, and other is a USB C socket with special over-molding. The socket side has two mounting 'ears' with M3 screws installed 20mm apart. Can be used with box walls up to 0.25" wide. If you have a thinner-walled box, simply swap out the M3 screws for shorter ones.
In stock
+ −
Add to wish list
Panel Mount Cable USB C to Micro B Male - 30cm
US$7.63
This panel mount cable will allow you to enclose a device that has a USB Micro B port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB Micro B plug connector, and other is a USB C socket with special over-molding.
In stock
+ −
Add to wish list
OTG USB Flash Drive Adapter for Apple and Android Devices
US$19.95
This small On-The-Go adapter enables you to extend your iPhone, iPad, Android-phone or tablet storage capacity by adding a MicroSD card. It enables your device to read from and write to the memory card.
In stock
+ −
Add to wish list
MOD-USB-HUB USB 2.0 HUB 4-Port - High Speed Controller
US$10.93
This is a unique product that allows you to connect your Micro Usb to the computer and offer four additional usb ports that share the 500mA power source and requires no drivers. You could also connect your Arduino micro to the pins to communicate with the usb devices and power externally via Micro USB with a higher voltage. In either cases the ports are restricted to 500mA.
In stock
+ −
Add to wish list
MOD-SL2.1A, USB Header to 2 Female Extension Cable Card 9-Pin HUB USB 2.0 9 Pin Connector Port Splitter
US$12.75
USB Header to 2 female Extension Cable Card 9-Pin HUB USB 2.0 9 Pin Connector Port Splitter
In stock
+ −
Add to wish list
MOD-MSR600-CA USB Magnetic stripe card reader Module 3-Track, POS Credit Card Reader Swiper
US$40.72

USB Magnetic stripe card reader Module 3-Track, POS Credit Card Reader Swiper

In stock
+ −
Add to wish list
MOD-ADUM3160, USB to USB Digital Signal Isolator
US$19.97

USB is one of the most commercially used types of port, yet it has been generally avoided in industrial applications because of possible interference, transient voltage and so on. This isolator hopes to reduce the danger while also assuring that the information being transferred is intact with the help of an ADUM3160.

In stock
+ −
Add to wish list
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter
US$3.14
There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other.  Since this does not have any resistors or other connections inside for the data lines, this won't work for charging an iPhone, iPod or iPad or other device which expects some sort of resistance on the D+ and D- connections. It does, however, work great for Arduinos, BeagleBones, Raspberry Pis, many generic cellphones & Android devices, as well as most other USB-powered gadgets.
In stock
+ −
Add to wish list
Micro USB Type B Female to Male Apple Lighting Port Adapter
US$3.99
A tiny adapter that can allow you to carry a Micro USB type B cable and convert into an Apple Lighting port when you really need it in a pinch.
In stock
+ −
Add to wish list
Micro USB B to USB C Adapter (Power + Data)
US$1.34
This adapter will take Micro USB B cables and convert them into male USB C ports. You can use this device to transfer files or simply power your devices.
In stock
+ −
Add to wish list
Micro USB B Jack to USB A Plug Round Panel Mount Adapter
US$11.60
If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this Micro USB B Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing required. Un-screw the plastic nut, insert the plug and re-attach. Ta-da! Now you have two HDMI sockets on either side for connecting any cable.
In stock
+ −
Add to wish list
Micro B Round Panel Mount Extension Cable - 30cm
US$7.63
If you need to add a panel-mount connection for USB Micro B,  but don't have the time or ability to cut a custom oval or square hole, this Round Panel Mount Extension Cable is the easiest and fastest way to panel-ify your existing HDMI kit. The adapter is about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing required. Un-screw the plastic nut, insert the plug and re-attach. Ta-da! Now you have a USB Micro B jack on one end and a Micro B plug on the other!
In stock
+ −
Add to wish list
FIT0784, 5.5/2.1mm DC to Type-C Adapter
US$5.41

The FIT0784 is DC 5.5 x 2.1mm Female to USB-c Male adapter plug.

In stock
+ −
Add to wish list
FIT0783, 5.5/2.1mm DC to Micro USB Adapter
US$3.59

The FIT0783 is a DC 5.5 x 2.1mm Female to USB-Micro Male adapter plug.

In stock
+ −
Add to wish list
COMP-USB3-MF-URA Adapter USB 3.0 Converter Male to Female UP 90 Degree
US$4.50

COMP-USB3-MF-URA Adapter USB 3.0 Converter Male to Female UP 90 Degree  

In stock
+ −
Add to wish list
COMP-USB3-MF-RRA Adapter USB 3.0 Converter Male to Female RIGHT 90 Degree
US$4.50

COMP-USB3-MF-RRA Adapter USB 3.0 Converter Male to Female RIGHT 90 Degree   

In stock
+ −
Add to wish list
COMP-USB3-MF-LRA Adapter USB 3.0 Converter Male to Female LEFT 90 Degree
US$4.50

COMP-USB3-MF-LRA Adapter USB 3.0 Converter Male to Female LEFT 90 Degree   

In stock
+ −
Add to wish list
COMP-USB3-MF-DRA Adapter USB 3.0 Converter Male to Female DOWN 90 Degree
US$4.50

COMP-USB3-MF-DRA Adapter USB 3.0 Converter Male to Female DOWN 90 Degree   

In stock
+ −
Add to wish list
COMP-USB-RJ45, USB-A Female to RJ45 Adapter 8P4C
US$7.96
This is a USB-A female to RJ45 Adapter 8P4C.
In stock
+ −
Add to wish list
COMP-USB-MAMB, Male USB 2.0 Type-A to Male USB 2.0 Type-B Coupler/Adapter
US$1.77
Male USB 2.0 Type-A to Male USB 2.0 Type-B Coupler/Adapter Use this coupler to join a female USB Type-A to a female Type-B.
In stock
+ −
Add to wish list
COMP-USB-MAFB, Male USB 2.0 Type-A to Female USB 2.0 Type-B Coupler/Adapter
US$1.77
Male USB 2.0 Type-A to Female USB 2.0 Type-B Coupler/Adapter Use this coupler to convert a female USB Type-A to a male Type-B.
In stock
+ −
Add to wish list
COMP-USB-FAMB, Female USB 2.0 Type-A to Male USB 2.0 Type-B Coupler/Adapter
US$1.77
Female USB 2.0 Type-A to Male USB 2.0 Type-B Coupler/Adapter Use this coupler to convert a male USB Type-A cable to a male Type-B.
In stock
+ −
Add to wish list
COMP-USB-FAFB, Female USB 2.0 Type-A to Female USB 2.0 Type-B Coupler/Adapter
US$1.77
Female USB 2.0 Type-A to Female USB 2.0 Type-B Coupler/Adapter Use this coupler to join a male USB Type-A cable to a male Type-B cable.
In stock
+ −
Add to wish list
COMP-HF201 USB 2.0 Micro SD Card to USB Adapter
US$4.99
This cool looking device is a plug-in-play micro SD card reader that you can connect to your computer and read or write data from the micro SD car into the computer and vise versa. It supports USB 2.0
In stock
+ −
Add to wish list
COMP-HDMI2USB HDMI Video Capture USB3.0
US$18.15
The video capture device can capture both HDMI-compatible video and HDMI-compatible audio, sending audio and video signals to computers and smart phones for preview and storage.
In stock
+ −
Add to wish list
COMP-177, 5-in-1 Portable USB HUB Fast Charging Convection Cooling USB 3.0 Laptop Extender
US$22.52
5-in-1 Portable USB HUB Fast Charging Convection Cooling USB 3.0 Laptop Extender
In stock
+ −
Add to wish list
COMP-176, 8-in-1 Type-C Hub to HDMI, PD, 3 x USB3.0 RJ45, 2 x Card Reader port
US$72.75
8 in 1 Type-C Hub to HDMI+PD+3*USB3.0+RJ45+2*Card Reader port This USB-C Hub Multiport Adapter has a HDMI 4K output, a Gigabit Ethernet 1000 Mbps, a...
In stock
+ −
Add to wish list
COMP-158, 2-in-1 Apple Lightning Adapter for Charging and Earphones
US$15.24
2-in-1 Apple Lightning Adapter for Charging and Earphones Enhance your user experience of using your favorite Apple product. Use this adapter to charge...
In stock
+ −
Add to wish list
COMP-156, USB C Female to USB A Male Adapter
US$5.41
USB C Female to USB A Male Adapter A tiny adapter that can allow you to carry a USB Type-C cable and convert into standard Male USB when you really...
In stock
+ −
Add to wish list
COMP-154 USB Type-C to Ethernet RJ45 + 3 USB 3.0 Hub
US$27.25
USB Type-C to Ethernet RJ45 + 3 USB 3.0 Hub This hub has 3 USB 3.0 ports for device charging/fast charging and data transfer, and an RJ45 ethernet port...
In stock
+ −
Add to wish list
COMP-153 USB Type-C to 3.5mm Audio Jack Splitter
US$4.32
USB Type-C to 3.5mm Audio Jack Splitter This adapter enables you to use your wired earphones/headphones while charging your device.
In stock
+ −
Add to wish list
COMP-146, 90 Degree 5.5 x 2.1mm DC Power Plug Female to Micro USB Male Charge Adapter for Cellphone Tablet
US$2.23

90 Degree 5.5 x 2.1mm DC Power Plug Female to Micro USB Male Charge Adapter for Cellphone Tablet

In stock
+ −
Add to wish list
COMP-142, OTG 3-to-1 USB Type-C Hub
US$7.23
OTG 3-to-1 USB Type-C Hub This small On-The-Go adapter enables you to extend your USB Type-C device by adding two USB Type-A ports as well as a USB C for...
In stock
+ −
Add to wish list
COMP-141, OTG 3-to-1 Micro USB Hub
US$7.23
OTG 3-to-1 Micro USB Hub This small On-The-Go adapter enables you to extend your micro USB device by adding two USB Type-A ports as well as a micro USB...
In stock
+ −
Add to wish list
COMP-137 OTG Cable : Mini USB to USB A Female, 16mm
US$3.41
OTG Cable : Mini USB to USB A Female, 16mm.
In stock
+ −
Add to wish list
COMP-136 Adapter Cable 3.5mm Male Audio AUX Jack to USB 2.0 Type A Female OTG
US$3.59
This device is an Adapter Cable with 3.5mm Male Audio AUX Jack to USB 2.0 Type A Female OTG. Play music off your flash drive by connectiong to automobile AUX plug.
In stock
+ −
Add to wish list
COMP-131 USB Type-C OTG Cable, White 150mm
US$7.96
White USB Type-C OTG Cable This tiny cable is a USB On-The-Go adapter that allows for data transfer from a slave device to the master unit, offering...
In stock
+ −
Add to wish list
COMP-130B-WH Micro-B USB OTG Cable, White 150mm.
US$5.23
This tiny OTG adapter cable has an additional ground inside touching a reversed pin on the microUSB side allowing the users to connect the device to their android phone or devices and load USB devices or even interface a USB mouse.
In stock
+ −
Add to wish list
COMP-130B Micro-B USB OTG Cable
US$3.15
This tiny adapter cable has an additional ground inside touching a reversed pin on the microUSB side allowing the users to connect the device to their android phone or devices and load USB devices or even interface a USB mouse.
In stock
+ −
Add to wish list
COMP-125 3-Port USB Hub with Power Over Ethernet – Micro USB O.T.G (On The Go) Adapter
US$12.69
Expand the connectivity of your Pi allowing you to connect keyboards, mice, WIFI dongles, and other USB devices while also having a super-handy Ethernet port for wired network connectivity. It is robustly constructed with good cable strain relief.
In stock
+ −
Add to wish list
COMP-118 High Speed 5GPBS USB Type-C Hub 4-Port Splitter Expansion for Desktop, Laptop, Ultrabook™, Chromebook Pixel™, and MacBook Pro
US$9.78

This high-speed 5GPBS USB Type-C 4 port splitter Adapter is ideal for desktop, laptop, Ultrabook™, Chromebook Pixel™, and MacBook Pro users who don’t have enough USB 3.0 ports available

 

In stock
+ −
Add to wish list
COMP-117 USB Charger Wall Station 12 Ports Portable, 12A, 5VDC
US$22.70
This a 12 port USB charger operating at 5 Volts with a 12 Ampere total current draw. Two ports can provide up to 3.5A while the rest can provide 2.4A, 1.5A...
In stock
+ −
Add to wish list
COMP-116 USB Charger Wall Station 10 Ports Portable, 10A, 5VDC
US$18.15

The COMP-116 is a 10 port USB charger operating at 5 Volts with a 10 ampere current draw. 8 ports can accommodate 2.4 amperes, except for 2 ports which accommodate 1 ampere.harge up to 10 USB devices simultaneously. Simply connect any USB mobile device, such as an iPad, iPhone, iPod, Tablet PC, Smartphone, a Wireless Hotspot etc. and quickly charge all your devices from one place.

In stock
+ −
Add to wish list
COMP-115 USB Charging Station with 4 Ports
US$16.33
Supports 4 devices at a time. It has two 2.4A ports and 1A ports. This is a powerful and efficient way to charge multiple devices like mobiles, cameras, etc. Just plug in the charger to the wall socket and it's ready to charge. 
In stock
+ −
Add to wish list
COMP-114 High Speed 5GPBS USB 3.0 Hub 4-Port Splitter Expansion Adapter for Laptop PC, Phone, HD Drive
US$8.87

This high-speed 5GPBS USB 3.0 4 port splitter Adapter is an ideal connection for hard disk drives, digital cameras, scanners, printers, external CD/DVD, flash memory drives, mouse, keyboard and etc.

 

In stock
+ −
Add to wish list
COMP-113 Mini USB 3.0 Hub, 3 in 1
US$7.23
This product is a USB 3.0 Port Hub. It's small discrete and compact.
In stock
+ −
Add to wish list
COMP-112-R, 7-Port USB 3.0 Hub with Individual Power Rocker Switches and Power Interface
US$21.61
COMP-112-R, 7-Port USB 3.0 Hub with Individual Power Rocker Switches and Power Interface This is a 7-port USB HUB offering four USB 3.0 connectivity...
Delivery within 2-3 weeks
+ −
Add to wish list
COMP-111-R, 4-Port USB 3.0 Hub with Individual Power Rocker Switches and Power Interface
US$15.95
COMP-111-R, 4-Port USB 3.0 Hub with Individual Power Rocker Switches and Power Interface This is a 4 port USB HUB offering four USB 3.0 connectivity...
Delivery within 2-3 weeks
+ −
Add to wish list
COMP-110 USB 3.0 4-Port USB Hub
US$13.93
This is a 4 port USB HUB offering four USB 3.0 connectivity ports. All you have to do is connect the provided USB 3.0 male connector in your computer USB 3.0 port to use it at fast speeds. If you connect it on a USB 2.0 port, you will not gain USB 3.0 speeds. This device will work on MAC/Linux and Windows based computers. Awesome tool to have if you want to program MicroSD cards for raspberry pi and read data from USB stick at the same time. This device does not have an external power connector for those devices that run at higher amperage.
In stock
+ −
Add to wish list
COMP-105 All-in-One Memory Card Reader with USB 2.0
US$7.96
This memory card reader is an all-in-one solution for those who carry different memory cards and want to access their data on the go. Features:...
In stock
+ −
Add to wish list
COMP-100 3.0 USB + Card Reader Hub
US$19.95
With a brushed metal finish for the top cover of this USB Hub device, you can connect your MicroSD, M2, SD and SDHC or even your MS DUO cards without a problem. It also sports three USB 3.1/3.0 ports to connect any USB 2.0 or USB 3.1/3.0 devices at high speeds as long as the main cable is connected to your PC using the USB 3.1/3.0 port.
In stock
+ −
Add to wish list
COM-13004 microSD USB Reader
US$7.81
This is an awesome little microSD USB reader. Just slide your microSD card into the inside of the USB connector, then stick this into a USB port and the card’s contents will pop up on your computer. 
In stock
+ −
Add to wish list
CAB-USB3-MF-URA Adapter Cable USB 3.0 Male to Female UP 90 Degree
US$7.23

CAB-USB3-MF-URA Adapter Cable USB 3.0 Male to Female UP 90 Degree  

Delivery within 2-3 weeks
+ −
Add to wish list
CAB-USB3-MF-RRA Adapter Cable USB 3.0 Male to Female RIGHT 90 Degree
US$7.23

CAB-USB3-MF-RRA Adapter Cable USB 3.0 Male to Female RIGHT 90 Degree  

In stock
+ −
Add to wish list
CAB-USB3-MF-LRA Adapter Cable USB 3.0 Male to Female LEFT 90 Degree
US$7.23

CAB-USB3-MF-LRA Adapter Cable USB 3.0 Male to Female LEFT 90 Degree  

In stock
+ −
Add to wish list
CAB-USB3-MF-DRA Adapter Cable USB 3.0 Male to Female DOWN 90 Degree
US$7.23

CAB-USB3-MF-DRA Adapter Cable USB 3.0 Male to Female DOWN 90 Degree  

In stock
+ −
Add to wish list
CAB-USB-XH5A USB 2.0 TO XH2.54mm 5P Female - 1.5m
US$6.32
Use this 1,5 meter cable to breakout a USB Type-A down to XH2.54mm 5 connections (Vcc, GND, D+ and D-). The wires are preinstalled to 2.54mm connectors.
In stock
+ −
Add to wish list
CAB-USB-XH-1X4 Female USB Panel Mount Connector to Female XH White 4 position Header 2.54mm Pitch, 30cm.
US$4.32

This is a Female USB Panel Mount Connector to Female XH White 4 position Header 2.54mm Pitch, 30cm.

In stock
+ −
Add to wish list
CAB-USB-VGA, USB 3.0 to VGA Converter Driver Free
US$17.06

This product has a fast transfer speed and standard USB and VGA interfaces. It is suitable for connecting a device with a USB port to a device with a VGA interface.

In stock
+ −
Add to wish list
CAB-USB-SH-1X5 Female USB Panel Mount Connector to Female SH White 5 position Header 0,50mm Pitch
US$4.50

This is a Female USB Panel Mount Connector to Female SH White 5 position Header 0,50mm Pitch, 30cm.

In stock
+ −
Add to wish list
CAB-USB-PH4 Cable USB TO PH2.0 4Pin Data Cable for mainboard, 60cm
US$5.41
This is a data cable USB connector to PH2.0 4Pin for mainboard, 60cm. long.
In stock
+ −
Add to wish list
CAB-USB-PH-1X4 Female USB Panel Mount Connector to Female PH White 4 position Header 2,54mm Pitch, 30cm
US$4.32

This is a Female USB Panel Mount Connector to Female PH White 4 position Header 2.54mm Pitch, 30cm.

In stock
+ −
Add to wish list
CAB-USB-M-1X4 Female USB Panel Mount Connector to Female White 4 position Header 1.25mm Pitch, 30CM
US$4.41

This is a Female USB Panel Mount Connector to Female White 4 position Header 1.25mm Pitch, 30CM

In stock
+ −
Add to wish list
CAB-USB-D-1X5 Female USB Panel Mount Connector to Female Dupont Black 5 position Header 2,54mm Pitch, 30CM
US$4.23

This is a Female USB Panel Mount Connector to Female Dupont Black 5 position Header 2,54mm Pitch, 30 cm.

In stock
+ −
Add to wish list
CAB-USB-3.5MM-VC 8403 Cable Audio Amplifier Class D, 5V 2*3W, 3.5mm Jack with Volume Control
US$7.23

8403 Cable Audio Amplifier Class D, 5V 2*3W, 3.5mm Jack with Volume Control.

In stock
+ −
Add to wish list
CAB-USB-2-XH2.54 Internal XH2.54 9Pin to 2 Port USB 2.0 Female type #1
US$6.32
Motherboard Internal XH2.54 9Pin to 2 Port USB 2.0 Female Panel Mount together DATA Cable 50cm
 
In stock
+ −
Add to wish list
CAB-USB-1-XH2.54, Internal XH2.54 9Pin to 2 Port USB 2.0 Female
US$5.41
Motherboard Internal XH2.54 9Pin to 2 Port USB 2.0  Female Panel Mount DATA Cable 50cm
In stock
+ −
Add to wish list
CAB-740 Cable USB Connector Male Micro to USB Female Mini, 50cm
US$3.59

The CAB-740 is a male micro USB connector cable to female mini USB connector, 50 cm. long.

 

In stock
+ −
Add to wish list
CAB-650-100 USB A Male to USB B Male 100cm Cable Printer Cable
US$3.59
This is a generic USB A (thumb stick end) to USB B (Printer Port) cable. They are commonly used to connect Arduino Uno to PC. You can use them for a variety of applications and the cable measures 100cm in length. This usb cable does not come with ferrite beads for noise cancellation and we doubt you need for the given length.
In stock
+ −
Add to wish list
CAB-650 USB A Male to USB B Male 30cm Cable Printer Cable
US$1.99
This is a generic USB A (thumb stick end) to USB B (Printer Port) cable. They are commonly used to connect Arduino Uno to PC. You can use them for a variety of applications and the cable measures 30cm in length. This usb cable does not come with ferrite beads for noise cancellation and we doubt you need for the given length.
In stock
+ −
Add to wish list
CAB-640 Micro-USB 2.0 Male to Female Extension Cable 50cm Panel Mount Hole
US$4.54
This Micro USB 2.0 Extension Cable With screws Panel Mount Hole extends the reach of the Micro-USB port on your tablet or phone and is compatible with both OTG (USB On-The-Go) and MHL (Mobile High-Definition Link) adapters. It has 2 panel mount holes. It can be used with box walls up to 0.25" wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. 
 

 

In stock
+ −
Add to wish list
CAB-602BR-BL Blue Braid 1M USB A Male to Right Angle Micro USB Cable
US$4.50

This blue1Meter USB A Male to Right Angle Micro USB braided Cable can only supply power to your target device.

In stock
+ −
Add to wish list
CAB-602BR-BK Black Braid 1M USB A Male to Right Angle Micro USB Cable
US$4.50

This black1Meter USB A Male to Right Angle Micro USB braided Cable can only supply power to your target device.

In stock
+ −
Add to wish list
CAB-600-WH USB 2 to Micro B USB Data Charging Transmission Cable , 2A White
US$4.50
USB 2 to Micro B USB Data Charging Transmission Cable , 2A White. This product can do both data transfer and supply power to your target device! It is also long enough, making programming and debugging a lot easier. Length: 90cm / 35.43 Inches / 2.95 Feet. Color: White
In stock
+ −
Add to wish list
CAB-600-S USB A to Micro B Cable – 30cm long
US$1.08
Looking for a USB cable for your android phone, BBC-MicroBit, Arduino Promicro or any device that needs an Micro-B to USB A cable? This product can do both data transfer and supply power to your target device! It is also long enough, making programming and debugging a lot easier. Length: 30cm / 11.81 Inches / 0.98 Feet
Delivery within 2-3 weeks
+ −
Add to wish list
1 2