Our Brands

Sensors

49 - 63
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
65 - 73
Newest Items First
15 Per Page
381-ADA Waterproof DS18B20 Digital temperature sensor + extras
381-ADA Waterproof DS18B20 Digital temperature sensor + extras
US$17.42
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C.
In stock
+ −
Add to wish list
166-ADA Round Force-Sensitive Resistor (FSR) - Interlink 402
166-ADA Round Force-Sensitive Resistor (FSR) - Interlink 402
US$10.78
FSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is a Interlink model 402 FSR with 1/2 diameter sensing region.
In stock
+ −
Add to wish list
270-ADA Thermocouple Type-K Glass Braid Insulated - K
270-ADA Thermocouple Type-K Glass Braid Insulated - K
US$15.33
Features: K type thermocouple with glass over-braiding. Good up to 500 °C (900 °F)! Color-coded wires. 1 meter long (a little more than 3 feet). Best used with a thermocouple amplifier such as the MAX6675 or MAX31855. 
In stock
+ −
Add to wish list
374-ADA DS18B20 Digital temperature sensor + extras
374-ADA DS18B20 Digital temperature sensor + extras
US$7.00
These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter.
In stock
+ −
Add to wish list
464-ADA 12" eTape Liquid Level Sensor + extras
464-ADA 12" eTape Liquid Level Sensor + extras
US$75.17
The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces with electronic control systems. The eTape sensor's envelope is compressed by the hydrostatic pressure of the fluid in which it is immersed.
In stock
+ −
Add to wish list
Touch screen (Nintendo DSL digitizer)
US$9.49
This resistive touch screen can be used with a stylus or fingertip and is easy to use with a microcontroller. You can put it over a paper overlay for a touch control panel or attach it to an LCD to DIY a touch-activated display.
In stock
+ −
Add to wish list
SoftPot Sensor Instructional Kit
SoftPot Sensor Instructional Kit
US$22.85

This Sensor Kit teaches you how to use a linear touch pot with Arduino. Of course the contents of the kit can be used for many other activities.

In stock
+ −
Add to wish list
SEN0127 Analog Gas Sensor(MQ2)
SEN0127 Analog Gas Sensor(MQ2)
US$12.53
This is used in gas leakage detecting equipments in consumer and industry markets, this sensor is suitable for detecting LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.
In stock
+ −
Add to wish list
SEN0131 Analog LPG Gas Sensor(MQ6)
SEN0131 Analog LPG Gas Sensor(MQ6)
US$13.93
This is a simple-to-use liquefied petroleum gas (LPG) sensor. It can be used in gas leakage detecting equipment in consumer and industry applications,this sensor is suitable for detecting LPG, iso-butane, propane, LNG.
In stock
+ −
Add to wish list
SP-L-0025-103-3-ST SoftPot Sensor, 25mm, 3%, 10K Ohms
SP-L-0025-103-3-ST SoftPot Sensor, 25mm, 3%, 10K Ohms
US$16.72
Specifications: Connector: Solder Tab. Voltage Rating: 500VAC. Resistance Tolerance: 20%. Temperature Range: -40˚C to +50˚C. Output Type: Analog-Voltage.
In stock
+ −
Add to wish list
HP-L-0025-103-3-ST HotPot Sensor, 25mm, 3%, 10K Ohms
HP-L-0025-103-3-ST HotPot Sensor, 25mm, 3%, 10K Ohms
US$17.97

Specifications: Connector: Solder Tab. Voltage Rating: 500VAC. Resistance Tolerance: 20%. Temperature Range: -40˚C to +85˚C. Output Type: Analog-Voltage.

In stock
+ −
Add to wish list
MP1-L-0025-103-5-ST Magnetopot Sensors, 25mm, 5%, 10K Ohms
MP1-L-0025-103-5-ST Magnetopot Sensors, 25mm, 5%, 10K Ohms
US$17.06
 A magnet on the inside of a cylinder, or on the other side of a motion device will guide the built-in magnetics of the MagnetoPot for position output as a voltage divider. As opposed to a Reed Switch, which gives simply “open” or “close” signals, the MagnetoPot gives the full linear travel as a magnetic sensor.
In stock
+ −
Add to wish list
MP1-L-0050-103-5-ST Magnetpot Sensors, 50mm, 5%, 10K Ohms
MP1-L-0050-103-5-ST Magnetpot Sensors, 50mm, 5%, 10K Ohms
US$20.70
A magnet on the inside of a cylinder, or on the other side of a motion device will guide the built-in magnetics of the MagnetoPot for position output as a voltage divider. As opposed to a Reed Switch, which gives simply “open” or “close” signals, the MagnetoPot gives the full linear travel as a magnetic sensor. 
In stock
+ −
Add to wish list
MP1-L-0100-103-5-ST MagnetoPot Sensor, 100mm, 5%, 10K Ohms
MP1-L-0100-103-5-ST MagnetoPot Sensor, 100mm, 5%, 10K Ohms
US$22.52
Specifications: Connector: Solder Tab. Voltage Rating: 500VAC. Resistance Tolerance: 20%. Temperature Range: -40˚C to +85˚C. Output Type: Analog-Voltage.
In stock
+ −
Add to wish list
360 MiFare Classic (13.56MHz RFID/NFC) White Tag - 1KB
360 MiFare Classic (13.56MHz RFID/NFC) White Tag - 1KB
US$4.38
This is a blank MiFare Classic 'laundry' tag - often used for laundry or identification but also found in other systems where a small proximity card is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
Delivery within 2-3 weeks
+ −
Add to wish list
49 - 63
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
65 - 73