Our Brands

Robotics

4 - 18
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
20 - 29
Newest Items First
15 Per Page
TIRE-42 Smart Car Robot Rubber Tire – 42mm
US$1.48
This is a high quality rubber tire for hobbyist robotic projects. This tire is treaded to allow for high performance on your robot. The tire is compatible with most motor shafts. Best results at 1100KV at 12 steps/revolution.
In stock
+ −
Add to wish list
TIRE-41 Smart Car Robot Rubber Tire – 41mm
US$1.48
This is a high quality rubber tire for hobbyist robotic projects. This light-weight rubber tire is designed to be slim and agile to allow your robot to reach high speeds with minimal drag.
In stock
+ −
Add to wish list
BLT-GT2-2H Tensioning/Tension Spring for GT2 Belts
US$0.55
This small spring is designed to fit on any 6mm width GT2 Belts. This simple addition provides extra tension for better accuracy and movement. You may need a plier to help secure onto the belt.
In stock
+ −
Add to wish list
MP-BS-010 3D Printer Pushrod Tension Spring 36.5 x 25.5 mm
US$0.63
3D Printer Pushrod Tension Spring 36.5 x 25.5 mm Product size: total length 36.5mm, spring part 25mm
In stock
+ −
Add to wish list
BLT-GT2-1M GT2, 2mm Pitch, 6mm wide, 1meter long open-ended Belt
US$2.79
Excellent for linear movement of x and y axis components. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys. This belt is open ended, meaning you need to either use zip ties or some fastener to create a band belt.
In stock
+ −
Add to wish list
MP-BS-011 Springs for 3D printer Extruders
US$0.59
This spring has a lower tension force excellent for 3D printer extruder mechanism. We highly recommend the 3D-H-013 for Heat bed springs. Please be advised, the pricing is set for one spring.
In stock
+ −
Add to wish list
SW-BLUE 2-5/8" Diameter Servo Blue Wheel
SW-BLUE 2-5/8" Diameter Servo Blue Wheel
US$4.23

These are colorful wheels to attach any robot. The hubs dimension out at 65mm (just under 2-5/8"), by 7.62mm wide (0.3").

In stock
+ −
Add to wish list
SW-RED 2-5/8" Diameter Servo Red Wheel
SW-RED 2-5/8" Diameter Servo Red Wheel
US$4.23
Looking for a quick and easy way to attach a wheel to a servo for a wheeled robot? Here's the answer! This custom-molded wheel is designed to fit to most servo hubs (excluding Hitec), and give solid traction to your robot. The hubs dimension out at 65mm (just under 2-5/8"), by 7.62mm wide (0.3"). Adding one molded-on thermoplastic silicone "tire" to the hub makes the rolling diameter 67mm (2-5/8"). Each wheel comes with ONE black special-grip tire. Compatible with GWS and Parallax continuous rotation servos.
In stock
+ −
Add to wish list
FT-DC-M001 Top Plate for 2WD Robot Chassis Kit
US$6.99
This top plate fits on top of the FT-DC- 002 2WD Robot Chassis Kit to provide an extra working area on the chassis. Made of anodized aluminum to match the top plate on the FT-DC- 002 Robot chassis Kit. Includes mounting hardware.
In stock
+ −
Add to wish list
FT-DC-002 2WD Robot Chassis Kit
US$24.95
This metal 2WD Robot Chassis Kit with DC Motors provides you with a high quality metal chassis frame complete with two DC motors, matching wheels and caster as well as a top metal plate with mounting hardware. You can easily make a line tracking car, obstacle avoidance car or remote control vehicle by adding your own microcontroller such as an Arduino or Raspberry PI with a power supply, motor controller and sensors. Additional top plates (FT-DC- M001) are available to provide extra working area on your chassis. Note: Battery pack is not included.
In stock
+ −
Add to wish list
WIG-13118 SparkFun Servo Trigger
US$26.61
The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal changes state, the Servo Trigger is able to tell an attached servo motor to move from position A to position B. To use the Servo Trigger, you simply connect a hobby servo and a switch, then use the on-board potentiometers to adjust the start/stop positions and the transition time. You can use a hobby servos in your projects without having to do any programming!
In stock
+ −
Add to wish list
Springs for 3D Printer Heat Bed
US$0.69
Springs are used to support the bed or the extruder to keep the idler pressure constant. The springs create a gap from the heat bed to the base of the printer.
In stock
+ −
Add to wish list
RACG-01 Mechanical Claw Gripper
US$12.53
This mechanical claw is made from metal and is pretty heavy-duty. It is great for robotic projects. The mechanism features brass sleeves in the joints which make them more rigid and less likely to come loose. The claw opens to about 2" and depending on the servo motor used, it can pick up some relatively heavy objects. The new spring-loaded clutch helps protect your servo gears from damage and also increases the gearing to 2:1, allowing the servo to act over its entire range and provide more gripping power!
In stock
+ −
Add to wish list
MOT-GEAR-03 Pack of 10 Plastic Gears for 2mm shaft with 36:10 teeth
US$4.19
This pack contains 10 pieces of 19mm size plastic gears. This specific version has 36 outer teeth and 10 inner teeth that is designed to work with 2mm shaft rods. Commonly used for replacement parts on motors or toys.
In stock
+ −
Add to wish list
SF-ROLLARM Robotic Arm Kit 4-Axis for Arduino
US$110.59
The Rollarm Kit for Arduino is designed for mass hobbyists to learn robot arm control. With the open source MCU Arduino UNO and a servo expansion board, the robot arm is easy to use and full of fun. You can control its four axes by the 4 potentiometers on the handle, as well as make them move on your computer. In addition, it can memorize the movements it's made and repeat again and again, making it a great tool for repeated tasks.
In stock
+ −
Add to wish list
4 - 18
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
20 - 29