Our Brands

Development Boards

80 - 94
88 89 90 91 92 93 94 95 96 97 98 99 100 101 102
96 - 110
Newest Items First
15 Per Page
DFR0131 Proto Screw Shield-Assembled (Arduino Compatible)
US$16.73
Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping. The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with this arduino-compatible screw shield. The prototyping shield provides a fast prototpying area for projects. It features a LED (D13) and two buttons (reset and general).
In stock
+ −
Add to wish list
DFR0274 RGB LED Strip Driver Shield v1.0
US$19.50
Want to program your RGB LED strip to be a bit more "rhythmic" or "unpredictive"? This RGB LED Strip Shield contains all the components you need to build a super cool RGB (or other three channel) LED project with your Arduino. The shield has 3 outputs with pulse width modulation. Each can control any 12V load, at up to 3A. The shield has build-in IR receiver which allows the LED strip being controlled by an IR remote controller. A buildin fuse protects the LED strip from over current or any shortage by any reasons. It cares your hard work. This shield makes it possible to drive about 10 meter length RGB LED Strip with your Arduino processor, which almost require 10Amps(@12V) driving capability.
In stock
+ −
Add to wish list
DFR0492 FireBeetle Board-328P with BLE4.1
US$33.75
DFRobot FireBeetle series are low power consumption microcontrollers designed for Internet of Things (IoT) development. This Bluetooth controller combines Bluetooth Low Energy 4.1 with Arduino controller, offering functions similar to the former Bluno series but with lower power consumption. FireBeetle BLE 4.1 is compatible with Bluno series (BLE 4.0) and performs much better. It equipped with more stable DIALOG Bluetooth 4.1 chip, supporting maximum 4Kbyte/s transmission rate and low power consumption (25uA POWER DOWN). It can be directly applied to low power consumption application such as wearable and intelligent tools and so on. It also supports multiple Bluetooth cascade, KISS connection (approach connection) and compatible with Bluno series. Its connection can be realized by holding host BOOT and moving to the target peripheral device.
In stock
+ −
Add to wish list
PGM-ULINK2 Emulator, Debug Adapter USB-JTAG
US$26.53
The ULINK2 Debug Adapter connects your PC's USB port to your target system (via JTAG, SWD, or OCDS) and allows you to program and debug embedded programs on target hardware. ULINK2 Features: Supports various ARM7, ARM9, Cortex-M4, 8051, MKD5.0 and C166 devices. JTAG speed up to 10MHz. Serial Wire Debug (SWD) support for ARM Cortex-M based devices. Serial Wire Viewer (SWV) Data Trace for Cortex-M up to 1Mbit/s (UART mode). NXP 2-wire debug interface (P89LPC952 and P89LPC954) support. With memory R/W during execution, terminal emulation, and serial debug output. Seamless integration with the Keil IDE & Debugger. Wide target voltage range: 2.7V - 5.5V. USB powered (no power supply required) Plug-and- Play installation using. Target: 10-pin (0.05") - Cortex Debug Connector, 20-pin (0.10") - ARM Standard JTAG Connector.
Delivery within 2-3 weeks
+ −
Add to wish list
ARD-620 Arcade Style Pushbutton Breakout Board
US$4.61
This is a simple breakout board that features five pushbuttons. You can program your code to specific functions when the buttons are pressed. This board is a perfect example of how to design a circuit using only one analog pin from your microcontroller! Depending on which push button you press it will vary the voltage begin returned back to the microcontroller! If you are looking for a simple board that doesn’t use multiple digital pins and is easy to use, this board is a genius little trick to save those precious digital pins. Note: The pushbuttons come with a yellow cap, you can purchase our pushbutton kit that comes with various colored caps if you choose to decorate the board. When no buttons are pressed analogRead will indicate the full voltage 1023. SW1 will be 0, SW2 will be 30, SW3 will be 86, SW4 will be 164 and SW5 will be 348.
In stock
+ −
Add to wish list
PP-120 DC power supply breakout board 2.1mm Jack 2A
US$1.39
This device is a DC power supply breakout board with a 2.1mm jack on the connector. PCB Size: 2.8 X 1.3cm. Power output interface: 2 way VCC and GROUND.
In stock
+ −
Add to wish list
BB-DB9-F Breakout board, Connector DB9 female to Terminal Block 9 pos.
US$3.84
This device is a DB9 female RS232 to 9 Position Screw Terminal Block breakout board. The wire range of the 9 Positions Screw Terminal Block is 22-14AWG. Specifications: Terminal block pitch: 3.96mm. Screw hole diameter: 2mm (use slotted screwdriver). Dimensions: Approx. 3.5cm (L) * 3cm(W) * 1cm(H). Weight: 15g.
In stock
+ −
Add to wish list
BB-DB9-M Breakout board, Connector DB9 male to Terminal Block 9 pos.
US$3.84
This device is a DB9 male adapter RS232 to 9 Position Screw Terminal Block breakout board. The wire range of the 9 Positions Screw Terminal Block is 22-14AWG. Specifications: Terminal block pitch: 3.96mm. Screw hole diameter: 2mm (use slotted screwdriver). Dimensions: Approx. 3.5cm (L) * 3cm(W) * 1cm(H). Weight: 15g.
In stock
+ −
Add to wish list
SEN0170 Anemometer Kit (0-5V)
US$100.00
Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium alloy, the anemomter is of high strength, weather resistance and corrosion resistance. The millitary quality interface ensures long life of this anemometer, at the same time enhancing the accuracy of wind speed acquisition. Together with other components, this anemometer can be widely used in measureing wind in areas such as engineering, railways, docks, power plants, meteorological, cableway, environment study, agriculture, energy monitoring, health study with corresponding signal output. With the instructions and sample code, users can easily get wind speed level through voltage signal output (0 to 5v).
In stock
+ −
Add to wish list
DFR0521 micro:bit Expansion Board for Boson (Gravity Compatible)
US$16.00
micro:bit is a pocket-sized microcontroller designed for kids and beginners to learn coding and electronics, letting them easily bring ideas into DIY digital games, interactive projects and robotics.
In stock
+ −
Add to wish list
DFR0489 FireBeetle ESP8266 IOT Microcontroller (Supports Wi-Fi)
US$19.95
DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC and multiple interfaces such as HSPI, UART, PWM, I2C and I2S. In DTIM10, the full power consumption to maintain WiFi connection reached to 1.2mW. Equipped with 16MB outer SPI flash memory, ESP8266 is available for programs and firmware storage. Compatible with Arduino programming enables Firebeetle ESP8266 to lower the barrier of programming. Operator can implement Arduino programming codes directly onto ESP8266 to reduce the difficulty of operating and increase the stability of board.
In stock
+ −
Add to wish list
WEMOS-RING-12 WEMOS X-Ring WS2812B RGB LED
US$8.46
This is an LED RGB ring for the WEMOS D1 Mini. The ring offers 12 RGB LEDs that can be programmed for the ESP8266 using the Adafruit Neopixel library.
In stock
+ −
Add to wish list
PI-VGA VGA Hat For Raspberry Pi 3B / 2B / B+ / A+ CA
US$17.50
This Raspberry Pi Hat allows you to connect a VGA monitor to your project. Combined with your Raspberry Pi HDMI port, you can easily use 2 or more monitor screens.
In stock
+ −
Add to wish list
MICROBIT-ARCADE Educational Game Kit
US$79.98
So you want to make and play your own games? Well micro:bit and ABRA electronics have created the perfect solution for you! The Microbit-Arcade is the only classic arcade that runs on 2 AA batteries. This kit provides all the necessary parts and instructions to have your arcade set up and running in a few hours. The buttons and joystick provide that genuine arcade feeling. The kit comes with 3 sample games (Tag, Catch and Chase) and guidelines to development your own games even further. In no time, you’ll be developing your own awesome games to show off with!
In stock
+ −
Add to wish list
TDA7297 15W Dual-Channel Audio Amplifier Board
US$11.19
This TDA7297 compact dual channel amplifier board provides 15 clean watts of audio per channel from 20 to 20,000 cycles. Amplifier runs on a wide range of DC power input from 6-18 VDC. Has a volume control potentiometer on board. Amplifier chip includes short circuit as well as thermal overload protection.
In stock
+ −
Add to wish list
80 - 94
88 89 90 91 92 93 94 95 96 97 98 99 100 101 102
96 - 110