Our Brands

Development Boards

79 - 93
87 88 89 90 91 92 93 94 95 96 97 98 99 100 101
95 - 109
Newest Items First
15 Per Page
WAVE-14037 RPi Camera (M), Fisheye Lens
US$48.93
Features: Raspberry Pi Camera, supports all revisions of the Pi. Fisheye Lens, offers wider field of view. 5 megapixel OV5647 sensor. Camera specifications; CCD size: 1/4inch, Focal Length: adjustable, Field of View: 200 degree (while other normal cameras are typically 72 degree), Sensor best resolution: 1080p. 4 screw holes: Used for attachment, Provides 3.3V power output, Supports connecting fill flash LED. 2592 × 1944 still picture resolution. Support 1080p30, 720p60 and 640x480p60/90 video record. Dimension: 25mm x 24mm.
In stock
+ −
Add to wish list
7inch HDMI LCD (H) (with case), 1024x600, IPS
US$113.52
Features: 7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920x1080). Toughened glass capacitive touch panel, 6H hardness. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers. (When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free) (When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free). Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, supports HDMI audio output. Also supports VGA input (Mini HDMI Male to VGA Female Cable is required and should be purchased separately). High quality PC case, optional tilt angle: 30°/50°.
In stock
+ −
Add to wish list
WEMOS-SCALE-KIT 1KG WEMOS ESP32 with 0.96 OLED and HX711 Module Scale Kit
US$43.44
This is a Wemos esp32 DIY Weighing scale kit that is capable of measuring the weight of objects up to 1 kilogram . Once Calibrated properly, it can be very accurate (error of +- 1 gram). The kit includes all the cables and hardware necessary to start weighing objects! You can replace the load cell for a higher capacity reading up to 10KG! (you may need to reconfigure your HX711 driver). Check: SENS-10, SENS-5 or SEN-13329 on our website.
In stock
+ −
Add to wish list
TEL0010 USB to TTL Converter (CP210)
US$13.93
This USB to TTL converter combine the USB-232-1 (USB to Single RS232 Adapter) and TTL-232-1 (Port-powered RS232/TTL converter) allows you to convert USB to TTL/CMOS compatible levels and vice versa. It can be used to set up APC220 RF wireless module.  It can be used as STC microcontroller program downloader.
In stock
+ −
Add to wish list
DFR0518 Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
US$10.50
Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects. It expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch between 3V-5V, allowing up to 5V 2A digital (PWM) output. Micro:Mate is in the same dimension of micro:bit. It connects to micro:bit through contact pins (with spring loaded), ensuring easy, compact and secure connection. The rubber bumpers and the 3.5mm audio jack on the back side keep the expansion installed stably on the board, meanwhile prevents reversed connection.
In stock
+ −
Add to wish list
M5STACK-P3 M5Stack ProtoBoard Expansion Stackable Unit
US$5.44
This board is designed for the M5Stack, M5Stack Panda and M5Stack PSRAM that we carry in stock. Essentially you add this board on the bottom of the development units and have access to GPIO to through hole plates. Solder any unit or add jumpers to circuit unique circuits if desired.
In stock
+ −
Add to wish list
M5STACK-P2 M5Stack Protoboard Kit
US$7.66
This board is designed for the M5Stack, M5Stack Panda and M5Stack PSRAM that we carry in stock. Essentially you add this board on the bottom of the development units and have access to GPIO to through hole plates. Solder any unit or add jumpers to circuit unique circuits if desired. This unit comes with the protoboard, Grove cable and DHT22 humidity sensor and female to male header extension to create a larger gap for the components.
In stock
+ −
Add to wish list
M5STACK-LORA M5Stack LoRa 433MHz SPI based Stackable Board
US$17.50
This board is designed for the M5Stack, M5Stack Panda and M5Stack PSRAM that we carry in stock. Essentially you add this board on the bottom of the development units and offers 433MHz wireless communication. Most of the electronic components you want running on this board allows you run RF remotes and other RF controller units easily operating.
In stock
+ −
Add to wish list
M5STACK-GSM M5Stack GSM SIM800L with 3.5mm Headphone and Mic Stackable Board
US$19.25
This board is designed for the M5Stack, M5Stack Panda and M5Stack PSRAM that we carry in stock. Essentially you add this board on the bottom of the development units and have access a 3.5mm headphone jack along with a built-in microphone. To offer more features, this board also comes with a SIM800L GSM card reader.
In stock
+ −
Add to wish list
M5STACK-GPS M5Stack Neo M8N GPS Stackable Board
US$43.62
This board is designed for the M5Stack, M5Stack Panda and M5Stack PSRAM that we carry in stock. Essentially you add this board on the bottom of the development units and have access to the GPS module added on board. This board comes included with its own GPS antenna, saving you the trouble of having to purchase one.
In stock
+ −
Add to wish list
M5STACK-H 2 row 15 pin 2.54mm pitched headers for M5Stack (4 pairs a set)
US$8.75
This header is commonly found on M5Stack, M5Stack Panda and M5Stack PSRAM. If you need additional spacing between your boards that stack up and need spacing, this header is what you need. If you have a prototype board and require some clearance, simply connect this header in between to give some spacing.
In stock
+ −
Add to wish list
WEMOS-DS1307 WEMOS WIFI D1 Mini Shield RTC DS1307 Real Time Clock
US$6.55
The DS1307 serial real-time clock is a low power, small packaged yet powerful calendar. Data is transferred in Serial via I2C. The clock is capable of providing seconds, minutes, hours, day, date, month, and year data. The clock operates in either the 24-hour or 12- hour format with AM/PM indicator. In addition, the end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup power supply. It is great to be used with your Arduino-related projects! Battery is included.
In stock
+ −
Add to wish list
AM-130-10 8 Bit – 1 Byte I2C Bi-Directional Logic Level Converter 5/3.3 VDC for Microcontrollers and Modules
US$5.38
Application: Interfacing 3.3VDC sensors to 5VDC microcontrollers and vice versa. Supply VCCA with 5VDC and VCCB with 3.3VDC. Connect Data to A1 and output will be B1 if you want 5VDC to 3.3VDC and Vice Versa.
In stock
+ −
Add to wish list
ARD-614 Arduino Mega2560 Sensor Shield
US$6.15
This Sensor Shield for Arduino Mega compatible microcontrollers makes interfacing with sensors and servos a breeze. All digital pins have been shifted inwards from where you would usually find them and next to the Digital Pins (S) are Gnd (G) and Vcc (V) bus. You can remove the jumper near the terminal block (SEL) and supply any fixed voltage from the terminal block you want for the entire Vcc bus or keep the jumper in place and offer 5v from Arduino 5V pin. Offers a LCD parallel and LCD Serial connector port. You also have access on the analog pins located below the pushbutton. The push button allows user to reset the microcontroller and see with two led indicators for status and power. There are other dedicated headers below the Analog pin for Bluetooth connection, APC220 connection, SPI connection and I2C connection. This board in summary brings all the Arduino pins closer and offers option to provide power for your sensor/servo needs. Great for robotics or any generic project that requires sensors, motors or any other peripheral to attach.
In stock
+ −
Add to wish list
3046-ADA Assembled Adafruit Feather HUZZAH with ESP-F v1.1 With Headers
US$29.45
This is the Assembled Adafruit Feather HUZZAH ESP-F v1.1 with headers - our take on an 'all-in-one' ESP-F v1.1 WiFi development board with built in USB and battery charging and ready to go immediately! Its an ESP-F v1.1 WiFi module with all the extras you need. At the Feather HUZZAH's heart is an ESP-F v1.1 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired up a USB-Serial chip that an upload code at a blistering 921600 baud for fast development time. It also has auto-reset so no noodling with pins and reset button pressings.
Delivery within 2-3 weeks
+ −
Add to wish list
79 - 93
87 88 89 90 91 92 93 94 95 96 97 98 99 100 101
95 - 109