Our Brands

Development Boards

72 - 86
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94
88 - 102
Newest Items First
15 Per Page
WAVE-10703 RPi Camera (H), Fisheye Lens, Supports Night Vision
US$40.90
This Raspberry Pi Camera supports all revisions of the Pi, it has got a Fisheye Lens that offers wider field of view and comes with infrared LED. All that makes it a great PI camera for outoor and indor projects.
In stock
+ −
Add to wish list
WAVE-14718 Colorful Display Module for micro:bit - 1.8 inch 160x128
US$19.95
This is a colorful display module designed for the BBC micro:bit, 1.8inch diagonal, 160x128 pixels, capable of displaying 65K colors.Tired of the 5x5 LED matrix? Time to get a tiny monitor for your micro:bit, this one would be the ideal choice.
In stock
+ −
Add to wish list
WAVE-11944 Raspberry Pi Zero V1.3 Camera Adapter Cable - 15cm
US$5.45
This ribbon cable allows you to connect the pi camera into your Raspberry PI Zero V1.3
To be used with the Raspberry Pi Zero V1.3 specifically.
In stock
+ −
Add to wish list
WAVE-12039 Raspberry Zero V1.3 mini Camera
US$27.99
This Raspberry Pi Camera module with cable supports Raspberry Pi Zero V1.3  and Raspberry Pi Zero W only. It features a 5 megapixel OV5647 sensor that's
In stock
+ −
Add to wish list
MOD-TS0199 PCF8591 AD/DA Converter Module
US$16.93

The PCF8591 is a single-chip, single-supply and low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing maximum of eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus.

In stock
+ −
Add to wish list
MOD-SFT-D302 SFT-D302 Dual Channel Digital Class D Digital Amplifier  2x30W - 7.5-24VDC
US$15.33
If you are looking into making a DIY boombox, look no further! This board will take care of all of the electronic work for you. Power it with a 2S/3S lipo battery, wire an audio connector to the input and you are ready to rock! Speakers, wires, connectors, lipo batteries are needed and sold separately.
In stock
+ −
Add to wish list
ARD-NANO-TS0234 Remote Controller Module for Arduino Nano and NRF24L01
US$12.59
The expansion board integrates the pin sockets for Arduino Nano and NRF24L01, as well as a 2.5D joystick. With this board, you can make a controller by yourself conveniently which can control a robot, smart car, or other smart devices.
In stock
+ −
Add to wish list
ARD-LP-FTDI LilyPad FTDI Basic Module - 5V 
US$9.23
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with Arduino boards. It can also be used for general serial applications!
In stock
+ −
Add to wish list
PIM260 Scroll Bot - Pi Zero W Project Kit
US$64.18
A robot friend to sit on your desk and scroll the news, weather, or your Twitter feed - Scroll Bot! The Scroll Bot Kit* combines the Pi Zero W with our new swish Scroll pHAT HD board, and masquerades as a friendly orange robot, perfect for sitting on your desk or on a shelf. It's ideal for scrolling messages or for simple animations and, of course, it takes advantage of the built-in wireless LAN on the Pi Zero W. It'll take around 30 minutes to assemble everything.
In stock
+ −
Add to wish list
PIM013 PiGlow
US$12.78
PiGlow is a spiral nebula of 18 coloured, individually-controllable LEDs for your Raspberry Pi. Use it for all sorts of things. And, of course, it fits inside a Pibow case! This diminutive board is compatible with the Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W, and can be controlled really simply with our PiGlow Python library. Use PiGlow for mood lighting / ambience, monitoring the status of your system, scripts, or daemons, Twitter mentions or emails, VESA-mounted behind your monitor or TV, or a zillion other things!
In stock
+ −
Add to wish list
PIM110 Picade PCB - Arduino Compatible with 3W Amp
US$31.23
This is an Arduino-compatible board with integrated 3W stereo amplifier designed for use in arcade projects (like our Picade). It behaves like a keyboard when plugged in via USB and has a default key-mapping (though you can reprogram it using the Arduino IDE). Connections are made using screw terminals for a solid, permanent installation. It uses the same micro-controller as the Arduino Leonardo (the ATmega32U4) and is pre-installed with the Arduino bootloader and our software.
In stock
+ −
Add to wish list
PIM192 Complete Kit (Host + 4 Sticks + Cables) – Mote
US$62.48
Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a USB A to micro B cable to your computer, and up to four APA102 RGB LED strips with 16 pixels on each (for a total of 64 pixels per USB controller, although the firmware can theoretically handle 128 pixels per channel). The USB controller can be powered straight from your computer, but we've provided a power boost port to which you can connect a 2+A power supply, to boost the pixel brightness to retina-searing levels. Of course, you can have several USB controllers running on the same computer, so your only real limitation is providing enough power.
In stock
+ −
Add to wish list
Automation HAT
US$32.45
We've pulled together a great set of features into this home monitoring and automation controller. With relays, analog channels, powered outputs, and buffered inputs (all 24V tolerant) you can now hook up a plethora of goodies to your Raspberry Pi all at once. Better still each channel has an indicator LEDs which means at a glance you can see what's happening with your setup. Even the analog channels have dimming LEDs that allow you to see the value they are currently sensing - swish!
In stock
+ −
Add to wish list
PIM113 Display-O-Tron HAT
US$31.23
Great for including a colourful character display and button inputs on your Raspberry Pi based projects! Includes a 16x3 character LCD display, 6-zone RGB LED backlight, bar graph, and six capacitive touch buttons all in one slim package. It's ideal for controlling your internet radio or home automation projects.
In stock
+ −
Add to wish list
PIM141 Drum HAT
US$17.04
Hook up these 8 advanced capacitive touch pads with LED indicators to start making sublime beats and control surfaces with your Raspberry Pi. Drum HAT is the much-requested companion to Piano HAT. It uses the same capacitive touch sensor to provide 8 finger-sized drum pads and an indicator LED for each pad. We added carefully-designed (we drew circles) light channels so that every pad can light up with a tap but none of the LEDs get in your way. It creates a really cool under-lighting effect, too!
In stock
+ −
Add to wish list
72 - 86
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94
88 - 102