Our Brands

Development Boards

67 - 81
75 76 77 78 79 80 81 82 83 84 85 86 87 88 89
83 - 97
Newest Items First
15 Per Page
WAVE-14972 240x240, 1.3inch IPS LCD display HAT for Raspberry Pi
US$19.59
This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface. Trying to add a control interface for your Pi? This compact display would be the ideal choice.
In stock
+ −
Add to wish list
WAVE-15141 Li-ion Battery HAT for Raspberry Pi, 5V Output, Quick Charge
US$26.59
The Li-ion Battery HAT integrates SW6106 power bank management chip, allows providing 5V regulated power supply to your Pi from a 14500 battery, makes the Pi becomes a portable device. It will charge the battery as well, supports bi-directional quick charge. This module can be used as a universal mini power bank, also works with other 5V devices.
In stock
+ −
Add to wish list
WAVE-14882 RS485 CAN HAT for Raspberry Pi
US$19.59

The RS485 CAN HAT will enables your Pi to communicate with other devices stably in long-distance via RS485/CAN functions. Features: Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ CAN function, onboard CAN controller MCP2515 via SPI interface, with transceiver SN65HVD230. RS485 function, controlled via UART, half-duplex communication, with transceiver SP3485. Reserved control pins, allows to work with other control boards. Comes with development resources and manual (examples in wiringPi/python).

In stock
+ −
Add to wish list
ARD-616N Micro SD card and RTC Data Logging Shield for Arduino Nano/Micro - V3
US$13.60
If you are new to the Arduino platform, you should get one of these! It will get you going quickly - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program.
In stock
+ −
Add to wish list
Atmega328P Microcontroller Board Compatible with Arduino Uno R3
US$18.15

The Arduino Uno is a microcontroller board based on the ATmega328 Chip. It features 14 digital input/output pins which six of can be used as a PWM output, along with six analog inputs, a 16 MHz low profile crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

In stock
+ −
Add to wish list
TFPGA-P TinyFPGA Programmer
US$13.93
If you have yourself a TinyFPGA A-series board then you are definitely going to need this handy TinyFPGA Programmer. The TinyFPGA Programmer is a very simple USB-JTAG bridge designed to program bitstreams onto TinyFPGA A1 and A2 boards. Rather than an FTDI2232 USB interface chip the TinyFPGA Programmer uses a PIC16F1455 USB microcontroller and equipped with a micro USB connector. While not compatible with the FTDI2232 chip, the PIC micro has a much lower overall cost allowing your hardware to be cheaper overall!
In stock
+ −
Add to wish list
PI-ADS1115 Raspberry Pi 16 Bits I2C ADS1115 4 Channel ADC Module
US$18.13
The ADS1115 are precision analog-to-digital converters (ADCs) with 16 bits of resolution offered in an ultra-small, an MSOP-10 package. 
Data are transferred via an I2C-compatible serial interface, four I2C slave addresses can be selected, it operate from a single power supply at 3.3V.
In stock
+ −
Add to wish list
SENS-PPD42NS PPD42NS Dust Particle Sensor Module With Cable - 5VDC
US$9.94
This module features an infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air.
In stock
+ −
Add to wish list
OM-K-SK OMEGA2+ STARTER KIT
US$119.94
Jump-start your IoT development with the Omega2 Starter Kit, it includes everything you need to create 8 circuits that will teach you how to control LEDs, read inputs, control and read external sensors and displays, learn Python, and much more. Step by step instructions for building each circuit with the included parts can be found in the online Starter Kit Guide. Each Kit includes an Omega2+, an Expansion Dock, and a variety of electronics components that belong in the collection of every student of IoT, all nicely packed up in a stylish plastic carrying case.
In stock
+ −
Add to wish list
MOD-DS28E17 DS28E17 1-Wire-to-I2C Master Bridge Module
US$21.95
The DS28E17 is a 1-Wire slave to I2C master bridge device that interfaces directly to I2C slaves at standard (100kHz max) or fast (400kHzmax). Data transfers serially by means of the 1-Wire® protocol, which requires only a single data lead and a ground return.
In stock
+ −
Add to wish list
ARD-LP-21 LilyPad Yellow LED Module- 3VDC (5pcs)
US$3.07

This is a simple pack of five Yellow LilyPad LEDs that allow to be sewed into clothing or whatever else you can dream up.

In stock
+ −
Add to wish list
ARD-LP-22 LilyPad Green LED Module- 3VDC (5pcs)
US$3.07

This is a simple pack of five Green LilyPad LEDs that allow to be sewed into clothing or whatever else you can dream up.

In stock
+ −
Add to wish list
ARD-LP-23 LilyPad Blue LED Module- 3VDC (5pcs)
US$3.07
This is a simple pack of five Blue LilyPad LEDs that allow to be sewed into clothing or whatever else you can dream up.
In stock
+ −
Add to wish list
ARD-LP-24 LilyPad Red LED Module- 3VDC (5pcs)
US$3.07
This is a simple pack of five Red LilyPad LEDs that allow to be sewed into clothing or whatever else you can dream up.
In stock
+ −
Add to wish list
MOT-L6201 L6201, Single 1 Amp 48 Volt DC Motor Driver for 5v microcontrollers
US$15.33
This motor driver module can handle up to 48 volts and handle a maximum of 1 amp of current. Based on the L6201, a full bridge drive controller board allowing for backwards and forwards motion which is similar to the L298N.
In stock
+ −
Add to wish list
67 - 81
75 76 77 78 79 80 81 82 83 84 85 86 87 88 89
83 - 97