Our Brands

Development Boards

62 - 76
70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
78 - 92
Newest Items First
15 Per Page
Analog Discovery 2: 100MS/s USB Oscilloscope, Logic Analyzer and Variable Power Supply
US$558.60
Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analog Devices and supported by Xilinx University Program, Analog Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with analog and digital circuits in virtually any environment, in or out of the lab. The analog and digital inputs and outputs can be connected to a circuit using simple wire probes; alternatively, the Analog Discovery BNC Adapter and BNC probes can be used to connect and utilize the inputs and outputs.
In stock
+ −
Add to wish list
PYNQ-Z1: Python Productivity for Zynq-7000 ARM/FPGA SoC
US$450.22
The PYNQ-Z1 board is designed to be used with PYNQ, a new open-source framework that enables embedded programmers to exploit the capabilities of Xilinx Zynq All Programmable SoCs (APSoCs) without having to design programmable logic circuits. Instead, the APSoC is programmed using Python and the code is developed and tested directly on the PYNQ-Z1. The programmable logic circuits are imported as hardware libraries and programmed through their APIs in essentially the same way that the software libraries are imported and programmed.
Delivery within 2-3 weeks
+ −
Add to wish list
Basys 3 Artix-7 FPGA Trainer Board: Recommended for Introductory Users
US$254.75
The Basys 3 is an entry-level FPGA development board designed exclusively for Vivado Design Suite, featuring Xilinx Artix-7 FPGA architecture. Basys 3 is the newest addition to the popular Basys line of FPGA development boards, and is perfectly suited for students or beginners just getting started with FPGA technology. The Basys 3 includes the standard features found on all Basys boards: complete ready-to-use hardware, a large collection of on-board I/O devices, all required FPGA support circuits, a free version of development tools, and at a student-level price point.
In stock
+ −
Add to wish list
Cmod S7: Breadboardable Spartan-7 FPGA Module
US$113.52
The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.
In stock
+ −
Add to wish list
Cmod A7 35T: Breadboardable Artix-7 FPGA Module
US$138.60
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and MicroBlaze embedded soft-core processor designs using Xilinx's development software, Vivado. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just 0.7” by 2.75”, it can also be loaded in a standard socket and used in embedded systems.
Delivery within 2-3 weeks
+ −
Add to wish list
Adafruit HUZZAH32 – ESP32 Breakout Board
US$19.06
This breakout is basically the 'big sister' of our HUZZAH 8266, but instead of an ESP8266 it has the '32! We've pared down our popular Feather ESP32, removing the battery charger and USB-serial converter. You just get a regulator, some protection diodes, two buttons and an LED. For some projects, where price and size are at a premium, you can program this board over the 'FTDI cable' breakout when needed, and leave it alone otherwise.
Delivery within 2-3 weeks
+ −
Add to wish list
40V 50A MOSFET Isolation module for Arduino
US$3.69
With the help of optocoupler isolation, this module separate the control signal and power of the controlled device, which increases rigidity of the interference. This module uses D4184 MOSFET and highly suitable for any microcontrollers, Arduino operated at 3V or 5V. This is widely used to control the start and stop of the motor, solenoid valve and other tributary equipment’s.
In stock
+ −
Add to wish list
Sipeed MAIX-I module WiFi version (1st RISC-V 64 AI Module, K210 inside)
US$18.98
Inherit the advantage of K210's small footprint, Sipeed MAIX-I module, or called M1, integrate K210, 3ch dcdc power, 8MB/16MB/128MB Flash (M1w module add wifi chip esp8285 on it) into Square Inch Module.
In stock
+ −
Add to wish list
Sipeed MAIX Binocular Camera for Dock/Go/Bit
US$26.98
Sipeed Binocular camera module is a camera expansion board for Maix AI development boards designed for AI and Binocular stereo vision applications. It supports Binocular stereo vision and depth vision. The camera(OV2640 or OV7725) and I2S mic are optional.
In stock
+ −
Add to wish list
Sipeed 6+1 Microphone Array for Dock/Go/Bit
US$25.98
AI is pervasive today, from consumer to enterprise applications. With the explosive growth of connected devices, combined with a demand for privacy/confidentiality, low latency and bandwidth constraints, AI models trained in the cloud increasingly need to be run at the edge. MAIX is Sipeed’s purpose-built module designed to run AI at the edge, we called it AIoT. It delivers high performance in a small physical and power footprint, enabling the deployment of high-accuracy AI at the edge, and the competitive price make it possible embed to any IoT devices. As you see, Sipeed MAIX is quite like Google edge TPU, but it act as master controller, not an accelerator like edge TPU, so it is more low cost and low power than AP+edge TPU solution.
In stock
+ −
Add to wish list
Simple 2 DOF Tilt Sensor for Arduino RPI-1031
US$4.98
This is a simple 2-degrees-of-freedom digital sensor for 5V microcontrollers. It features 4 pins; 5VDC, GND, S1 and S2. The S1 and S2 are the digital output of the two tilt angles.
In stock
+ −
Add to wish list
4-DOF Metal Robot Arm Kit for Raspberry Pi, Bluetooth+WiFi version
US$81.85
This 4-DOF Metal Robot Arm Kit for Raspberry Pi contains all the components required to build your own robotic arm controlled with your smart phone using bluetooth or WIFI.
In stock
+ −
Add to wish list
4-DOF micro:bit Metal Robot Arm Kit for micro:bit, Bluetooth
US$81.67
This starter robotic arm kit for micro:bit includes: servo driver board, metal mechanical arm structure, and 4x metal gear servos. When used with the micro:bit, it is easy to control the arm by smart phone through Bluetooth connection.
In stock
+ −
Add to wish list
UART to WIFI Transmission Module
US$19.95
This module is designed to connect serial devices to the internet easily. It is based on the universal serial interface to meet the network standard embedded module. It features built-in TCP/IP protocol stack, to achieve the serial port, Ethernet and WIFI.
In stock
+ −
Add to wish list
ESP32 WiFi and Bluetooth Development Board with OV2640 2MP Camera 
US$15.33
The ESP32-CAM has a very competitive small form factor not to mention the camera module that can operate independently as a minimum system with a footprint of 27x40.5x4.5 mm and a deep sleep current of up to 6mA only!
Delivery within 2-3 weeks
+ −
Add to wish list
62 - 76
70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
78 - 92