Our Brands

Development Boards

50 - 64
58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
66 - 80
Newest Items First
15 Per Page
2-DOF Pan-Tilt HAT for Raspberry Pi
US$27.23
This is a 2-DOF pan-tilt kit designed for Raspberry Pi. With onboard PCA9685 PWM chip and TSL2581 ambient light sensor, it allows the Pi to control camera movement and sense light intensity through I2C interface.
In stock
+ −
Add to wish list
10.1inch Capacitive Touch Screen LCD (E), 1024×600, HDMI, IPS, Fully Laminated Screen, Supports Raspberry Pi, Jetson Nano, And PC
US$163.75
Device & System Support: Raspberry Pi: Supports Raspbian, 10-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free. Supports all versions of Raspberry Pi. Jetson Nano: Supports Ubuntu, single point touch, driver free. PC: Supports Windows 10 / 8.1 / 8 / 7, 10-points touch, driver free. Game Console: Xbox360, PS4, Switch...
In stock
+ −
Add to wish list
Uninterruptible Power Supply UPS HAT For Raspberry Pi, Stable 5V Power Output
US$31.65
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time. Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable. Onboard 5V regulator, up to 2.5A continuous output current. 5V USB output, convenient for powering other boards.
In stock
+ −
Add to wish list
Uninterruptible Power Supply UPS Module For Jetson Nano, Stable 5V Power Output
US$36.32
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time. 0.91" OLED for displaying info like batteries voltage, IP address, RAM usage, etc. Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable. Onboard 5V regulator, up to 2.5A continuous output current.
In stock
+ −
Add to wish list
2 Channel Stereo Audio Amplifier Module 5W+5W (PAM8403) Bluetooth 5.0
US$8.47
2 Channel Stereo 5W+5W(PAM8403) Bluetooth 5.0 Audio Amplifier Module This 5W audio amplifier features the PM8403 amplifier chip integrated...
In stock
+ −
Add to wish list
LilyPad Wearable Kit with Lilypad Arduino,LED and Sensors
US$59.95
LilyPad proto snap development kit is designed to learn how to add projects to Art Wearables(e-Textile) where to do electronic clothing.
In stock
+ −
Add to wish list
MOD-LM2662 Switched Capacitor Positive to Negative Voltage Conversion Module +5V/-5V 200mA
US$5.49
LM2662 Switched Capacitor Positive to Negative Voltage Converter Module +5V/-5V 200mA The maximum efficiency of 99%. The charge pump circuit is...
In stock
+ −
Add to wish list
BB-USBC Type C Male USB 3.1 Test Breakout Board
US$4.54
Board size: 20.6*10MM, Board thickness: 0.8MM sheet: FR-4 glass fiber board
In stock
+ −
Add to wish list
BB-USBC1 TYPE C Male to TYPE C Female USB 3.1 to 24pins Breakout Test Board, Double-sided
US$8.60
Board size: 20.6*36.2MM, Hole spacing: 2.54MM, Aperture: 1.0MM, Board thickness: 0.8MM sheet: FR-4 glass fiber board
In stock
+ −
Add to wish list
BB-USBC3  TYPE C female USB 3.1 to 24pins Breakout Test Board, Double-sided
US$9.46
 
In stock
+ −
Add to wish list
SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, global band support
US$53.95
This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
In stock
+ −
Add to wish list
Pmod AD5: 4-channel 4.8 kHz 24-bit A/D Converter
US$82.09
The Pmod AD5 is an analog-to-digital converter that utilizes a fourth order sigma-delta modulator, a programmable gain array, and on-chip digital filtering, all powered by the Analog Devices AD7193. With 24 bits of resolution on up to 8 different analog input channels, users may read the highly accurate voltage measurements with an rms noise as low as 11 nV through SPI.
In stock
+ −
Add to wish list
Pmod BT2: Bluetooth Interface
US$52.48
The Pmod BT2 is a powerful peripheral module employing the Roving Networks® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for updating the RN-42 firmware if needed.
In stock
+ −
Add to wish list
Pmod DA3: One 16-bit D/A Output
US$52.48
The Pmod DA3 is a 16-bit Digital-to-Analog converter powered by the Analog Devices AD5541A. The single-ended SMA output provides a clean, guaranteed monotonic analog output from the provided information given through an interface similar to SPI.
In stock
+ −
Add to wish list
Pmod I2S2: Stereo Audio Input and Output
US$39.36
The Digilent Pmod I2S2 features a Cirrus CS5343 Multi-Bit Audio A/D Converter and a Cirrus CS4344 Stereo D/A Converter, each connected to 3.5mm Audio Jacks. These circuits allow a system board to transmit and receive stereo audio signals via the I2S protocol. The Pmod I2S2 supports 24-bit resolution per channel at input sample rates up to 108KHz.
Delivery within 2-3 weeks
+ −
Add to wish list
50 - 64
58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
66 - 80