Our Brands

Development Boards

23 - 37
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
39 - 53
Newest Items First
15 Per Page
WRL-18034 ESP32-C3 WROOM Module - 4MB (PCB Antenna)
US$5.41
The Espressif ESP32-C3 is the next version of the popular ESP32 Bluetooth® and WiFi enabled module. This module features a single core, RISC-V-based processor with WiFi and Bluetooth LE 5.0 radios built into the SoC. The module features a PCB antenna and castellated plated pins for surface-mount soldering. This variation has 4 MB of on-board SPI flash and is the 85 °C temperature tolerant version.
Delivery within 2-3 weeks
+ −
Add to wish list
DEV-18615 Ethernet Kit for Teensy 4.1
US$5.49
The Ethernet Kit for Teensy 4.1 from PJRC includes an Ethernet MagJack connector, a bare circuit board, one ribbon cable, two headers, and a capacitor. As this is a kit that require assembly, some beginner-level soldering is required.
In stock
+ −
Add to wish list
3671-ADA Adafruit CSI or DSI Cable Extender for Raspberry Pi
US$4.32
The Adafruit CSI or DSI Cable Extender for Raspberry Pi t lets you connect two 15-pin 1.0mm pitch cables end-to-end and extend the length.
In stock
+ −
Add to wish list
DFR0914 4-Channel Level Converter (12V to 5V), Din Rail
US$14.51
This 12V to 5V level converter module with 4-channel Optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 5V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
DFR0913 4-Channel Level Converter (12V to 3.3V), Din Rail
US$13.60
This 12V to 3.3V level converter module with 4-channel Optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 3.3V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
DFR0912 2-Channel Level Converter (12V to 5V), Din Rail
US$10.87
This 12V to 5V level converter module with 2-channel optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 5V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
DFR0911 2-Channel Level Converter (12V to 3.3V), Din Rail
US$10.87
This 12V to 3.3V level converter module with 2-channel optocoupler isolation features common anode / common cathode / differential signal inputs. The level shifter translates signal level from 12V to 3.3V and offers PNP output (NPN to PNP available). It can be used for signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion, signal level voltage conversion and so on.
In stock
+ −
Add to wish list
FIT0807 PiTray Clip Din Rail Mount (Compatible for Raspberry Pi and NVIDIA Jetson Nano)
US$9.96
PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail installation solution suitable for industrial setup, home automation application as well as cluster building.
In stock
+ −
Add to wish list
WAVE-20808, Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Plus version (Pre-soldered headers)
US$15.24
The WAVE-20808 is an MCU board that incorporates the RP2040 microcontroller, with a dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins
In stock
+ −
Add to wish list
WAVE-20335, Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Mini version (Pre-soldered header)
US$9.05
The WAVE-20335 is a small MCU board. It uses the RP2040 microcontroller chip designed by Raspberry Pi, has 264KB of SRAM and 2MB of onboard Flash memory. It's extremely compact yet packs a punch with its processing power and peripherals.
In stock
+ −
Add to wish list
WAVE-20891, Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD 0.96" (Pre-soldered header)
US$21.61
The WAVE-20891 is a small MCU board designed for the Raspberry Pi Pico. It uses the RP2040 microcontroller chip and has an onboard 0.96inch IPS display, a Lithium battery recharge/discharge header, and a high-efficiency DC-DC buck-boost chip.
In stock
+ −
Add to wish list
WAVE-20203, Dual Gigabit Ethernet Mini-Computer For Raspberry Pi Compute Module 4 (not included), Metal Case, with Cooling Fan
US$90.77
The WAVE-20203 is a base board that can be used with Raspberry Pi Compute Module 4, and supports 7~12V DC power supply, onboard three USB3.2, dual Gigabit Ethernet ports.
In stock
+ −
Add to wish list
WRL-18583 ESP32-S2 WROOM Module - 4MB (PCB Antenna)
US$5.41
It's best to think of the ESP32-S2 WROOM Module as the next step in the ESP32 WROOM module line. It builds on the benefits of the original ESP32 WROOM Module with new and improved features such as security, display support, and increased environmental performance.
In stock
+ −
Add to wish list
DEV-16832 SparkFun OpenLog Artemis
US$81.56
The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line of code! OpenLog Artemis, or "OLA," automatically detects, configures, and logs Qwiic sensors. The OLA is specifically designed for users who just need to capture a lot of data to a CSV and get back to their larger project.
Delivery within 2-3 weeks
+ −
Add to wish list
SEN0494, 12.3MP Camera Module for NVIDIA Jetson Nano & Raspberry Pi CM3
US$103.75
The Raspberry Pi High Quality Camera is the latest camera board from Raspberry Pi Foundation. It adopts the IMX477R sensor, and requires a C- or CS-mount lens to work. It is compatible with Raspberry Pi series boards, offers higher resolution (12.3MP) and higher sensitivity (nearly 50% greater area per pixel for improved low-light performance) than the existing Camera Module V2.
In stock
+ −
Add to wish list
23 - 37
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
39 - 53