Our Brands

Development Boards

19 - 33
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
35 - 49
Newest Items First
15 Per Page
410-299 JTAG-HS3 Programming Cable
US$72.66
The JTAG-HS3 is an affordable high-speed Xilinx® FPGA programming solution. The HS3 builds on the successful JTAG-HS1 by adding an open-drain buffer to pin 14 allowing for the debugging of Xilinx Zynq-SOC processors. It can be attached to target boards using Xilinx's 2x7 connector*, and is compatible with all Xilinx tools, including iMPACT™, ChipScope™, and EDK.
In stock
+ −
Add to wish list
410-300 Genesys 2 Kintex-7 FPGA Development Board
US$1,237.28
The Genesys 2 is a high-performance, ready-to-use FPGA development board built around the Xilinx Kintex-7 FPGA. The Genesys 2 is a powerhouse for data and video processing applications, but offers a variety of peripherals making it a great solution for a wide array of projects. Everything needed for robust multimedia applications is already available on the board: DisplayPort connectors, HDMI sink and source, 16-bit VGA, 128x32 pixel OLED screen, and an audio codec with four 3.5mm jacks. One can quickly get started with A/V, image processing, or other multimedia applications without needing additional hardware.
Delivery within 2-3 weeks
+ −
Add to wish list
471-015 Zybo Z7: Zynq-7000 ARM/FPGA SoC Development Board Zybo Z7-20 with SDSoC Voucher
US$644.18
The Zybo Z7 is a ready-to-use embedded software and digital circuit development board built around the Xilinx Zynq™-7000 family. The Zynq-7000 tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. A rich set of multimedia and connectivity peripherals make the Zybo Z7 a formidable single-board computer. A MIPI CSI-2 compatible Pcam connector, HDMI input, HDMI output, and high DDR3L bandwidth establish the Zybo Z7 as an affordable, yet capable, solution for high-end embedded vision applications. Attaching additional hardware is made easy by the Zybo Z7's Pmod connectors, allowing access to Digilent's catalog of over 70 Pmod peripheral boards, including motor controllers, sensors, displays, and more.
Delivery within 2-3 weeks
+ −
Add to wish list
410-248 ZedBoard Zynq-7000 ARM/FPGA SoC Development Board
US$824.60
The ZedBoard is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC (APSoC). Take advantage of the Zynq-7000 APSoCs tightly coupled ARM® processing system and 7-Series programmable logic to create unique and powerful designs with the ZedBoard. This board contains everything necessary to create a Linux®, Android®, Windows®, or other OS/RTOS based design. Additionally, several expansion connectors expose the processing system and programmable logic I/Os for easy user access.
Delivery within 2-3 weeks
+ −
Add to wish list
410-251 JTAG-SMT2: Surface-mount Programming Module
US$67.11
The JTAG-SMT2 uses a 3.3V main power supply and a separate Vref supply to drive the JTAG signals. All JTAG signals use high speed, 24mA, three-state buffers that allow signal voltages from 1.8V to 5V and bus speeds of up to 30MBit/sec. The JTAG bus can be shared with other devices as systems hold JTAG signals at high-impedance, except when actively driven during programming. The SMT2 module is CE certified and fully compliant with EU RoHS and REACH directives. The module uses a standard Type-A to Micro-USB cable available for purchase from Digilent, Inc.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-21474, Dual-Mode Bluetooth Module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1
US$9.96
The WAVE-21474 is a 5.1 Bluetooth module designed for the Raspberry Pi Pico. It supports SPP and BLE and can be controlled via UART commands.
In stock
+ −
Add to wish list
WAVE-21179, ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi, With LCD and Pinheader
US$22.52
The WAVE-21179 is a wifi development board with compact size and plenty of peripherals. It has an integrated low-power WiFi SoC chip, a built-in LED Display and preinstalled headers for easy installation.
Delivery within 2-3 weeks
+ −
Add to wish list
ARD-JMP-KIT Basic Electronics Component Jump Starter Kit for Arduino
US$12.76

This electronic components kit contains the basic items including a breadboard, jumper wires, resistors, buttons and more to help you get started with learning Arduino or any electronic project.

In stock
+ −
Add to wish list
WT32-ETH01 Embedded WiFi Bluetooth-Compatible Ethernet Serial Port Wireless Module Network Combo Serial to Ethernet Module based on ESP32
US$34.08
The WT32-ETH01 is an embedded WiFi Bluetooth-Compatible Ethernet Serial Port Wireless Module Network Combo.
In stock
+ −
Add to wish list
AM-143 NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
US$3.75
This is an adjustable square wave signal generator with pulse frequency duty cycle using the good old NE555 Chip to output a pulse at a frequency determined by an adjustable resistance at the end of the module. LOad in between 5 and 12V and it’ll output a square wave.
In stock
+ −
Add to wish list
WAVE-20265, PL2303 USB To UART (TTL) Communication Module V2, USB-A Connector
US$5.41
The WAVE-20265 is a USB To UART (TTL) Communication Module V2 with a USB-A Connector.
In stock
+ −
Add to wish list
TEL0148, Fermion: Serial Data Logger for Arduino
US$7.25
The TEL0148 is a Data Logger for the Arduino. It supports a 32GB TF card and can be connected directly to a PC computer.
In stock
+ −
Add to wish list
MOD-XH-M802 Passive Mixer Tone Amplifier Module Board High and Low Voltage
US$6.75
This is a Passive Mixer Tone Amplifier Module Board High and Low Voltage
In stock
+ −
Add to wish list
DFR0789 Gravity: LED Switch Kit
US$36.25
This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little buttons can be used with micro:bit to realize various fun interactive projects, such as switch, backlight keyboard, music player panel, and recording control panel.
In stock
+ −
Add to wish list
DFR0785 Gravity: LED Button Kit
US$40.00
This is a simple LED-illuminated switch button. It’s just like a common switch button but lights up different colors(red/yellow/green/blue/white) when pressed down, which gives us visual feedback. These little buttons can be used with controllers like micro:bit, Arduino, etc., to realize various fun interactive projects.
In stock
+ −
Add to wish list
19 - 33
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
35 - 49