Our Brands

Development Boards

129 - 143
137 138 139 140 141 142 143 144 145 146 147 148
Newest Items First
15 Per Page
BOB-00499 SSOP to Dip Adapter 20 Pins
BOB-00499 SSOP to Dip Adapter 20 Pins
US$5.53
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We've made these 0.635mm devices fit just fine.
In stock
+ −
Add to wish list
BOB-08276 Breakout Board for XBee Module
BOB-08276 Breakout Board for XBee Module
US$3.91
This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly.
In stock
+ −
Add to wish list
BOB-00500 SSOP to Dip Adapter 28 Pins
BOB-00500 SSOP to Dip Adapter 28 Pins
US$5.53
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We've made these 0.635mm devices fit just fine. 
In stock
+ −
Add to wish list
BOB-00497 SSOP to Dip Adapter 8 Pins
BOB-00497 SSOP to Dip Adapter 8 Pins
US$4.01
8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We've made these 0.635mm devices fit just fine.
In stock
+ −
Add to wish list
BOB-10616 TLC5940 Breakout
BOB-10616 TLC5940 Breakout
US$29.00
This is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of this useful IC. All 16 PWM channels are broken out to standard 0.1" headers, which run alongside convenient voltage and ground rails.
In stock
+ −
Add to wish list
BOB-10680 Shift Register Breakout - 74HC595
BOB-10680 Shift Register Breakout - 74HC595
US$7.71
This is a breakout for the SOIC version of the 74HC595 shift register IC. Clock in data and latch it to free up IO pins on your micro. All pins from the IC are broken out to standard 0.1" spaced headers.
Delivery within 2-3 weeks
+ −
Add to wish list
BOB-09816 OpAmp Breakout
BOB-09816 OpAmp Breakout
US$11.10
This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed.
In stock
+ −
Add to wish list
BOB-00716 Breakout Board for RJ45
BOB-00716 Breakout Board for RJ45
US$1.92
This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for breadboarding or create your own RJ45 cable connection.
In stock
+ −
Add to wish list
BOB-09110 Breakout Board for Thumb Joystick
BOB-09110 Breakout Board for Thumb Joystick
US$4.10

This is a PCB for the Thumb Joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners. Dimensions: 1" X 1.25"

Delivery within 2-3 weeks
+ −
Add to wish list
BOB-09118 Opto-Isolator Breakout
BOB-09118 Opto-Isolator Breakout
US$9.76
This is a board designed for opto-isolation and electrically isolates a controller from the high-power system by use of an opto-isolator IC. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.
In stock
+ −
Add to wish list
BOB-10467 LED Tactile Button Breakout
BOB-10467 LED Tactile Button Breakout
US$3.50
This is a PCB for the LED tactile button and easy to use on your next project. Populate the board according to the polarity of the LED on the switch. The markings for the switch are irrelevant and can be reversed.
In stock
+ −
Add to wish list
27911 Gyroscope Module 3-Axis L3G4200D
27911 Gyroscope Module 3-Axis L3G4200D
US$41.99
This is a low power 3-axis angular rate sensor featuring temperature data as an added bonus. Raw angular rate and temperature data measurements are accessed from the selectable digital I2C or SPI interface.
Delivery within 2-3 weeks
+ −
Add to wish list
BOB-10402 EM-406 Connector Breakout
BOB-10402 EM-406 Connector Breakout
US$6.93
This is a simple breakout board that uses a vertical SMD connector for the EM401 or EM406 GPS module cables.
In stock
+ −
Add to wish list
BOB-00193 Adapter Board for Microchip ICD and ICD2
BOB-00193 Adapter Board for Microchip ICD and ICD2
US$6.93
This is a small PCB that adapts the standard Microchip 6-Pin RJ11 connector to the Olimex 6-Pin .1" Molex Connector.
Delivery within 2-3 weeks
+ −
Add to wish list
BOB-09056 Analog / Digital MUX Breakout
BOB-09056 Analog / Digital MUX Breakout CD74HC4067
US$10.17
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip can be used to connect 16 analog sources (like sensors) to 5 pins on a microcontroller.
Delivery within 2-3 weeks
+ −
Add to wish list
129 - 143
137 138 139 140 141 142 143 144 145 146 147 148