Our Brands

Development Boards

95 - 109
103 104 105 106 107 108 109 110 111 112 113 114 115 116 117
111 - 125
Newest Items First
15 Per Page
2471-ADA Adafruit HUZZAH ESP8266 Breakout
US$15.33

The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs.

In stock
+ −
Add to wish list
126-POLOLU 23201a Serial Adapter Fully Assembled
US$16.10
This deluxe serial port adapter (RS-232 adapter) converts logic-level signals to the higher voltages required for RS-232 and similar serial ports. Unlike competing units, the Pololu serial adapter operates over a 3-5.5 V supply range and gives you access to all eight of the signal lines available on a DB9 connector, including five transmit lines and three receive lines.
In stock
+ −
Add to wish list
3117-POLOLU A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge
US$46.13
This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors.
In stock
+ −
Add to wish list
AM-115 TTL I/O Level Converter Module
US$11.35
Use this device to step voltage down to communicate with Arduino mini, nano and etc. devices. Connect Direction and Enable to GND to the direction for a step up voltage from 3v to 5v for connecting sensors. This unit has 8 channels for multiple connections great for microcontrollers!
In stock
+ −
Add to wish list
AM-JOYSTICK Analog Joystick Module for Arduino
US$3.53
Looking for a 2 axis joystick with a push button for your project, want to create your own remote control or arcade device? This unit will provide all that on a breakout board simple to connect to any microcontroller and start working on your project!
In stock
+ −
Add to wish list
ARD-LEONARDO Arduino Leonardo Compatible ATmega32U4 Board
US$23.49
This is an Arduino Leonardo 100% compatible. Comes with USB cable.
In stock
+ −
Add to wish list
DEV-13343 LilyPad Reed Switch
US$11.41
The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that you can currently use the LilyPad Button and Switch. In order to make it more durable for wearable use, we’ve used a different style of reed switch, which is insulated.
In stock
+ −
Add to wish list
BB-MICROSD Micro SD Card board
US$4.39
Want to save data onto a MicroSD card, this device allows you connect and interface with Arduino Uno in a breeze. Read and Write to the SD Card and add versatility to your projects, runs with the MicroSD card library in Arduino IDE.
In stock
+ −
Add to wish list
PI2-CASE-H Acrylic Housing for RPI2 Model B
US$11.35
Looking for a clear see through casing for the Raspberry PI 2 Model B and Raspberry Pi B+? This acrylic casing allows for the installation of a fan and comes with two heatsink.
In stock
+ −
Add to wish list
WIFI-100 Esp8266 Lua Microcontroller and PWM Motor Shield
US$25.87
This microcontroller has some comparable functionality to the Arduino mini and is a great IoT device!  This device comes with a PWM shield and push button to select what power source you want for your motors. Capable of communicating with other devices since it has a esp-12e soldered onto the microcontroller.
In stock
+ −
Add to wish list
ARD-DS1307 Tiny RTC DS1307 Real time Clock
US$3.99
This compact device can be soldered with headers (not included) and assembled for real time precision based projects. Using the I2C interface makes it easy to interfacing with any microcontroller. Comes with a 3.6v rechargeable li-ion battery, assuming you have a charger for it.
In stock
+ −
Add to wish list
T-30-BL Mini Digital Voltmeter - Blue
US$4.54
This device is based on Blue Seven Segment Displays at the size of 0.28 inch per digit. It operates from 2.6v to 30v (max) and has two leads both negative and positive, making this very simple to integrate to your circuit. You may need to calibrate the values on the back next to the 16 pin IC using a 1mm screw.
In stock
+ −
Add to wish list
T-30-R Mini Digital Voltmeter - Red
US$4.54
This device is based on Red Seven Segment Displays at the size of 0.28 inch per digit. It operates from 2.6v to 30v (max) and has two leads both negative and positive, making this very simple to integrate to your circuit. You may need to calibrate the values on the back next to the 16 pin IC using a 1mm screw.
In stock
+ −
Add to wish list
T-30-GN Mini Digital Voltmeter-Green
US$4.54
This device is based on green Seven Segment Displays at the size of 0.28 inch per digit. It operates from 2.6v to 30v (max) and has two leads both negative and positive, making this very simple to integrate to your circuit. You may need to calibrate the values on the back next to the 16 pin IC using a 1mm screw.
In stock
+ −
Add to wish list
T-40 USB Voltage/Current Meter
US$7.20
Not to fret with this USB Voltage/Current Meter, compact portable and simple plug and play device makes reading values from a USB device seem easy. Features a blue Seven Segment Display that will display over time intervals voltage and current draw.
In stock
+ −
Add to wish list
95 - 109
103 104 105 106 107 108 109 110 111 112 113 114 115 116 117
111 - 125