Our Brands

Development Boards

94 - 108
102 103 104 105 106 107 108 109 110 111 112 113 114 115 116
110 - 124
Newest Items First
15 Per Page
WAVE-105 5 IO Keypad
US$6.29

By using particular IO scanning detection, the 5 IO Keypad takes only 5 IOs to control all of the onboard push buttons and joystick. 10 push buttons, 1 joystick (five positions), 5-bit interface.

In stock
+ −
Add to wish list
WAVE-10684, 2.8 inch Arduino LCD Touch Screen
US$27.07
A 2.8 inch 320 x 240 resolution Resistive touch screen. Works with Arduino compatible microcontrollers. Comes with a Micro SD Card interface onboard and is controlled via SPI. Backlight is adjustable via program.
In stock
+ −
Add to wish list
7inch HDMI LCD (C), 1024×600, IPS, with Bicolor case
US$99.95

Features: 7inch IPS screen, 1024x600 hardware resolution. Capacitive touch control. Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free. Backlight can be turned off to lower power consumption

In stock
+ −
Add to wish list
WAVE-11018, 5inch HDMI LCD (B) + Bicolor case
US$72.75
Features: 800×480 high resolution. Resistive touch control. Supports Raspberry Pi. Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images. Supports BB Black, comes with Angstrom image. For other mini-PCs, driver is required and should be developed by users. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen. HDMI interface for displaying, USB interface for touch control. Back light control to lower power consumption.
In stock
+ −
Add to wish list
WAVE-10207 4inch RPi LCD (A), 320×480, IPS
US$44.79
Designed for Raspberry Pi. Supports any revision of Raspberry Pi (directly-pluggable). Drivers provided (works with your own Raspbian/Ubuntu directly). IPS technology, high quality and perfect displaying from very wide viewing angle. 320×480 resolution. Convenient Men-Machine interface for Raspberry Pi, combined with the portable power, DIY anywhere anytime. Supports Raspbian system, enables your system to: Take photos by touching (up to 17 camera modes), Support software keyboard (system interaction without keyboard/mouse).
In stock
+ −
Add to wish list
EF03040 RPI GPIO Shield
US$13.93
RPI GPIO Shield turned Raspberry Pi GPIO into the normally-used Arduino I/O interface. The shield not only maintained most of Arduino UNO I/O interface，but also expanded IIC interface，UART TX/RX interface, and SPI interface, electronic bricks interface. RPI GPIO Shield inherited the Arduino UNO I / O all the features, which can be used to drive LED, sensors, LCD and other electronic modules and components.
In stock
+ −
Add to wish list
EF02038 Touch Shield
US$9.73
The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino projects with the touch shield. The touch shield has 12 capacitive touch pads. With this shield you can have a total of 12 touch sensitive buttons.
In stock
+ −
Add to wish list
EF02012 XBee Shield with Logic Level Converter SHD08
US$12.53
Features: With Logic Level Converter (3.3V to 5V or 1.8V to 5V or 1.8V to 3.3V). With CC1101 module connecter. Provide maximal 800mA under 3.3V. 4 indicator LED ( RSSI, ASS, Din, Dout) for XBee. Switchable of communication with FTDI-USB /Base board. Full 2.54mm break out for XBee. With wireless program hardware interfaces. Reset button for base board. Stackable interfaces.
In stock
+ −
Add to wish list
2471-ADA Adafruit HUZZAH ESP8266 Breakout
US$15.33

The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs.

In stock
+ −
Add to wish list
126-POLOLU 23201a Serial Adapter Fully Assembled
US$16.10
This deluxe serial port adapter (RS-232 adapter) converts logic-level signals to the higher voltages required for RS-232 and similar serial ports. Unlike competing units, the Pololu serial adapter operates over a 3-5.5 V supply range and gives you access to all eight of the signal lines available on a DB9 connector, including five transmit lines and three receive lines.
In stock
+ −
Add to wish list
3117-POLOLU A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge
US$46.13
This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors.
In stock
+ −
Add to wish list
AM-115 TTL I/O Level Converter Module
US$11.35
Use this device to step voltage down to communicate with Arduino mini, nano and etc. devices. Connect Direction and Enable to GND to the direction for a step up voltage from 3v to 5v for connecting sensors. This unit has 8 channels for multiple connections great for microcontrollers!
In stock
+ −
Add to wish list
AM-JOYSTICK Analog Joystick Module for Arduino
US$3.53
Looking for a 2 axis joystick with a push button for your project, want to create your own remote control or arcade device? This unit will provide all that on a breakout board simple to connect to any microcontroller and start working on your project!
In stock
+ −
Add to wish list
ARD-LEONARDO Arduino Leonardo Compatible ATmega32U4 Board
US$23.49
This is an Arduino Leonardo 100% compatible. Comes with USB cable.
In stock
+ −
Add to wish list
DEV-13343 LilyPad Reed Switch
US$6.52
The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that you can currently use the LilyPad Button and Switch. In order to make it more durable for wearable use, we’ve used a different style of reed switch, which is insulated.
In stock
+ −
Add to wish list
94 - 108
102 103 104 105 106 107 108 109 110 111 112 113 114 115 116
110 - 124