Development Boards

US$41.93
The GPS Expansion for the Onion Omega is a USB-based expansion that allows your Omega to pinpoint its location using both GPS as well as China’s Beidou satellite positioning systems. It comes with an on-board GPS antenna as well as a built-in u.FL connector to attach your own antenna. Technical Details: Accuracy: 1.8m, Search channels: 66, Tracking channels: 22, Sensitivity: -165 dBM, Update rate: 10 Hz.
In stock
+
Add to wish list

US$72.57

This is an action-packed and low-cost Arduino Kit. It includes all the components required to not only get you started, but also to allow you to deep-dive into more advanced components like RFIDs. It does not include an instruction manual. However at this point Arduino is so popular that a Google search on how to use any component will result in many tutorials.

In stock
+
Add to wish list

US$19.59
Makeblock Me Dual DC Motor Driver is the improvement version of Me Motor Driver V2.1. With on board RJ25 ports, you can drive two DC motors at a constant current of 1A (2A peak). The motor driver IC on the board is TB6612, TB6612 is a high efficiency MOSFET driver, with low heat dissipation. Over current protection included to stop the driver IC burned out. 
Delivery within 2-3 weeks
+
Add to wish list

US$9.23
This convenient DB25 Female breakout board has screw terminals to allow easy wiring and monitoring of all 25 pins from a DB25 connection. Each of the pin connections are labelled by pin number.
In stock
+
Add to wish list

US$6.15
This convenient DB9 Female breakout board has screw terminals to allow easy wiring and monitoring of all 9 pins from a serial RS232 port connection. Each of the pin connections are labelled by pin number and function.
Delivery within 2-3 weeks
+
Add to wish list

US$13.36
This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat.
In stock
+
Add to wish list

US$27.23
Small but powerful amplifier for a wide range of applications, for example MP3 player, melody generator, intercom, sound effects, headphones, radio receiver, PC sound card, music instrument...
Delivery within 2-3 weeks
+
Add to wish list

US$13.92
This is the Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board.
In stock
+
Add to wish list

US$9.16
It is a 8 channel or 8-bit logic level converter that is great for interfacing sensors or 3.3v logic components with 5v logic level microcontrollers. This unit will do the level shifting required to allow theses device to communicate without burning out each other. On the right side Vb is the input voltage reference of 5v, whereas Va and OE is the input reference of 3.3v.
In stock
+
Add to wish list

US$27.93

The Prop Shield is meant for making interactive light and sound effects on small handheld props and wearable costumes. Motion Sensors: Allows motion interactive light & sound. Audio Amplifier: Clear quality audio output to a small speaker. Fast LED Driver: Drive APA102 / Dotstar LEDs for colorful lighting with rapid response. Flash Memory: 8 Mbyte storage for images, sound clips, and data logging.

In stock
+
Add to wish list

US$7.69
This small module uses an LM358 to output a square wave at a frequency determined small jumpers and an adjustable resistance at the end of the module, with the duty cycle adjusted by the potentiometer at the center of the module. Put in between 5 and 12V and it’ll start right away.
In stock
+
Add to wish list

US$6.15
This small module uses the good old NE555 to output a pulse at a frequency determined by an adjustable resistance at the end of the module. Put in between 5 and 12V and it’ll output a square wave. A small LED lights up to show the device is powered.
In stock
+
Add to wish list

US$2.19
This small module converts logic levels for I2C communication protocols, enabling you to attach a 3.3V module to a 5V project (or vice-versa).
In stock
+
Add to wish list

US$24.02
This product includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons. This product ensures consumer's convience especially when computer is not available. Menu selection and monitoring can be easily achieved by this product even for gaming, that means you can test or debug your project by displaying information on the LCD display. This function makes sure that the project runs well.
In stock
+
Add to wish list

US$13.93
The LED Keypad Shield is an Arduino expansion shield with a 4 digit 8 segment digital tube display (common cathode). It has 5 buttons that can be used as menu select buttons or control buttons, using I2C to drive the digital tube for an easy user experience.
In stock
+
Add to wish list