ARD-618 Wireless Capable Joystick Development Board
This is a standard joystick board that comes with one joystick and seven push buttons. What makes this board remarkable is that it has a switch to change the output voltage to 3.3v or 5v. Just above the joystick you have access to a 8 pin adapter that is designed for the nRF24L01 and on the opposite side you have access to Bluetooth port. You can choose to get this board up and running with a wireless module or Bluetooth module.
If you are not using a wireless module, then you can insert a nokia 5110 LCD in the ports that have the nokia label on them. If you are not using Bluetooth you have access to the I2C port located under the push buttons!
All you need is to connect to any Arduino compatible board, preferably an uno, mega or due and some external power for your uno!
This board also supports +nRF24L01 for long range distance!
WARNING
