Our Brands

Robotics - Actobotics/ Servocity/goBILDA

Welcome to ServoCity where you can get the parts you need to bring your ideas to life! From servos to switches, from actuators to Actobotics to goBILDA, we work hard to bring you the best components backed by unparalleled technical support.

56 - 70
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78
72 - 86
Newest Items First
15 Per Page
555200 Motor Mount H (AndyMark Orbital/REV HD Hex Motors) (Actobotics)
US$8.87
When using an AndyMark Orbital 20 Gearmotor in conjunction with this mount, the motor shaft will protrude 0.75” from the face of the motor mount. When the mount is fastened to the outside of channel, this will put the shaft exactly halfway through which is perfect for using a shaft coupler to convert to a ¼” output.
In stock
+ −
Add to wish list
555202 36mm Bore Bottom Tapped Clamping Mount (Actobotics)
US$9.96
This 36mm Bottom Tapped Clamping Mount is intended to mount a 36mm diameter gear motor to the Actobotics® 1.50” pattern (measuring 1.061”). The tapped holes allow you to easily mount this part to channel using 6-32 x 5/16” screws. The height from base to center is 0.75” in order to remain on the standard 0.75” hole spacing found throughout the Actobotics build system.
In stock
+ −
Add to wish list
1702-0032-0002 1702 Series Quad Block Motor Mount (32-2) (goBILDA)
US$9.96
This motor mount is a solid way to fasten a Neverest Orbital 20 or a REV HD Hex Planetary Gear Motor to goBILDA. The included M3 x 10mm length screws maximize the thread depth found on either motor so that you don’t have to worry about your motors coming loose during the heat of competition.
In stock
+ −
Add to wish list
1400-0032-0036 1400 Series 1-Side, 2-Post Clamping Mount (36mm Bore) (goBILDA)
US$12.69
Fasten a 36mm diameter gear motor to your robot chassis using this mount. The clamping mount measures 24mm from base to center, providing a plethora of gear ratio options while staying on the 48mm center to center dimension.
In stock
+ −
Add to wish list
1704-0001-0001 Acetal Plastic Mount for TT Right Angle Gear Motor (1-1) (goBILDA)
US$3.41
Weight: 5.5g with hardware. Material: Plastic.
In stock
+ −
Add to wish list
1701-0016-0003 1701 Series Face Tapped Motor Mount (16-3) (goBILDA)
US$9.96
This motor mount is able to fasten to the face of a 5201 Series Gear Motor (as well as other spur motors that contain a 31mm bolt-circle) while centering the output shaft with the goBILDA pattern. We’ve included (6) M3 x 6mm screws to hold the motor mount to the face of the gearbox.
In stock
+ −
Add to wish list
555120 Micro Gear Motor Enclosure (Actobotics)
US$3.59
N20 motors may be handy, but we have found them hard to handle. By sliding them into this convenient enclosure, you have numerous mounting options using 6-32 screws. The holes align with the Actobotics build system so you can fasten them, in any orientation to channel or nearly any other Actobotics part. The enclosure not only aids in mounting, but also keeps your gears free of debris and protects the motor terminals once the back cover is snapped into place.
In stock
+ −
Add to wish list
1705-0016-0001 N20 Gear Motor Enclosure (goBILDA)
US$3.59
This rigid enclosure holds tightly onto your N20 motor providing you with 4mm diameter thru-holes for mounting from the top, bottom, front, or back. Besides making it easier to mount, your N20, this enclosure provides some level of protection to the exposed gears of the N20s gearbox.
In stock
+ −
Add to wish list
555164 NEMA 11 Stepper Motor Mount (Actobotics)
US$9.60
This NEMA 11 Stepper Motor Mount attaches to the face of your motor and provides mounting holes (both 6-32 threaded and #6 thru-hole) on the Actobotics 0.77" pattern. Being able to attach the motor aligned with the ½" hole of a channel or bracket gives you a good start to the assembly you want to put in motion. The NEMA 11 mount comes with (4) M2.5 x 4mm pan head screws to fasten the motor to the mount.
In stock
+ −
Add to wish list
555168 NEMA 8 Stepper Motor Mount (Actobotics)
US$8.87
This NEMA 8 Stepper Motor Mount attaches to the face of your motor and provides mounting holes on the Actobotics 0.77" pattern. Being able to attach the motor aligned with the ½" hole of a channel or bracket gives you a good start to the assembly you want to put in motion. The NEMA 8 mount comes with (4) M2 x 4mm pan head screws to fasten the motor to the mount.
In stock
+ −
Add to wish list
1700-0016-0023 1700 Series Face Tapped Stepper Motor Mount (NEMA 23) (goBILDA)
US$14.51
The NEMA 23 motor mount provides a clean and simple way to fasten a NEMA 23 stepper motor to your project. The mount has both threaded and thru-holes on the 16mm and 32mm patterns. The included M5 screws will pass through the tabs of the motor mount and thread into the motor mount for a solid and reliable connection.
In stock
+ −
Add to wish list
1700-0016-0017 1700 Series Face Tapped Stepper Motor Mount (NEMA 17) (goBILDA)
US$13.24
This mount allows you to fasten a NEMA 17 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws hold the motor to the mount and the heads will remain below the mounting surface.
In stock
+ −
Add to wish list
1700-0016-0014 1700 Series Face Tapped Stepper Motor Mount (NEMA 14) (goBILDA)
US$11.69
This mount allows you to fasten a NEMA 14 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws hold the motor to the mount and the heads will remain below the mounting surface.
In stock
+ −
Add to wish list
1700-0016-0011 1700 Series Face Tapped Stepper Motor Mount (NEMA 11) (goBILDA)
US$9.96
The NEMA 11 stepper motor mount is able to fasten to the face of a NEMA 11 motor using the supplied pan head screws. The screws are recessed into the counterbored holes in order to leave a smooth mounting surface. There are two thru-holes and two threaded holes on the 16mm pattern so that you have options for the best way to attach the mount to your structure.
In stock
+ −
Add to wish list
1700-0016-0008 1700 Series Face Tapped Stepper Motor Mount (NEMA 8) (goBILDA)
US$8.87
This mount will fasten to the face of a NEMA 8 stepper motor using the supplied pan head screws. The threaded holes are on the 16mm pattern so that you can fasten the mount to any pattern plate or channel using M4 screws.
In stock
+ −
Add to wish list
56 - 70
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78
72 - 86