Opto/Illumination

US$11.78
This is a general OLED display Module, 0.91inch diagonal, 128x32 pixels, with embedded controller, communicating via I2C interface. Features: 0.91inch small form factor. 128x32 high resolution. I2C interface, requires only two signal pins. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
In stock
+
Add to wish list

US$24.98
This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface. Features: 128x128 high resolution, 65K colors, clearly displays colorful images. Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
In stock
+
Add to wish list

US$6.99
This is a simple power distribution board made for LED strips. It consist of 11 rows of 4-pin jumpers suitable for LED Strips.
In stock
+
Add to wish list

US$34.94
This kit features four RGB led strips of length 500mm each. The driver includes two ports; one USB (power input) and the second is to be connected to the LED strips (power output). To control the colour, scan the QR code located on the LED driver and download "MAGIC HOME" app to be able to control all its features. Total strip length is 2 meters.
In stock
+
Add to wish list

US$15.33
This device has it all! It is the equivalent of the fancy equipment you may find in motion sensing lamp posts that turn on the light whenever they sens somebody passing by and off when no one is around to save energy.
In stock
+
Add to wish list

US$0.88
Character Size: 7.8 mm x 14.22 mm (0.31 x0.56”). Wavelength: 626 nm. If - Forward Current: 20 mA. Vf - Forward Voltage: 2.1 V.
In stock
+
Add to wish list

US$0.88
Character Size: 7.8 mm x 14.22 mm (0.31 x0.56”). Wavelength: 626 nm. If - Forward Current: 20 mA. Vf - Forward Voltage: 2.1 V.
In stock
+
Add to wish list

US$1.29
SFH 203 P          Photodiode Radial 5mm 850nm. Features Dark Current: 1nA Reverse Voltage: 50 V Rise Time: 5 ns Fall Time: 5 ns Half Intensity...
In stock
+
Add to wish list

US$27.99
This is a a 4 meter 12vdc led strip that has an epoxy coating, offering an IP rating of 67. This strip comes with an IR remote to control the brightness by 100%, 50% or 25%. You can also increase or decrease the brightness using the Bright + and Bright – buttons.
In stock
+
Add to wish list

US$19.95
The Mi-Light RGBW LED Controller Box is a 2.4GHz RF controllable LED accessory that enables your non-addressable LED strips to change color, dim, and select pre-loaded modes via the Mi-Light Remote Control.
In stock
+
Add to wish list

US$19.95
The Mi-Light 4-Zone LED Remote Controller is a 2.4GHz RF LED accessory that allows you to change the color and dim non-addressable LED strips attached to the RGBW LED Controller Box without the need of a smart phone app.
In stock
+
Add to wish list

US$27.99
This bundle includes an 8x8 RGB matrix module along with a LED matrix driver shield. With both plugged and powered from the Arduino, you are able to create different shapes in different colours!
In stock
+
Add to wish list

US$19.53
DFRobot FireBeetle series is low-power development board designed for the IoT projects. This FireBeetle covers display module is equipped with 128x64 resolution OLED and new version of SSD1360 driver IC, uses I2C interface, supports for the Arduino library and microPython coding program, fully compatible with the Gravity I2C OLED-2864 screen.
In stock
+
Add to wish list

US$41.93
DFRobot FireBeetle series is low-power development component designed for Internet of Things(IoT). This FireBeetle Covers-ePaper Black&White&Red Display Module(SPI) features a 2.13-inch electronic ink screen with 212x104 resolution and SPI interface, supporting Arduino library and microPython programming. This module is suitable for the current main control board of Firebeetle series. It has the characteristics of small size, compact layout, plug and play, low power consumption and good display effect. Compared with the traditional electronic ink screen it displays better and it integrates the GT30L24A3W/foreign language font chip. But compared with the traditional black-and-white electronic ink screen within 1s refresh speed, this screen refresh speed is relatively slow (at least once 12s). And it only suitable for static pictures or text display, but not for dynamic refresh.
Delivery within 2-3 weeks
+
Add to wish list

US$41.93
DFRobot FireBeetle Series is a low power development component designed for Internet of Things (IoT). This 2.13-inch black and white electronic epaper screen with SPI interface and 250 * 122 resolution, supporting Arduino library and microPython programming. This module is suitable for the current main control board of Firebeetle series. It has the characteristics of small size, compact layout, plug and play, low power consumption and good display effect. It also integrates the GT30L24A3W multi-language font chip, but only suitable for static picture or text display, not suitable for dynamic refresh.
In stock
+
Add to wish list