Our Brands

Electromechanical

135 - 149
143 144 145 146 147 148 149 150 151 152 153 154 155 156 157
151 - 165
Newest Items First
15 Per Page
BLT-220XL 220XL, .200” Pitch, 10mm Wide, 558.80mm Long, Close-Ended Synchro belt (Timing Belt)
US$9.10
This classic trapezoidal pitch is the original timing belt tooth design. This tooth pitch is commonly used for conveying applications (Conveyor belts). The tooth profile is fairly low and has a large surface area at the tip of the tooth providing good support on sliding conveyor surfaces.
In stock
+ −
Add to wish list
BLT-180XL 180XL, .200” Pitch, 10mm Wide, 457.20mm Long, Close-Ended Synchro belt (Timing Belt)
US$8.82
This classic trapezoidal pitch is the original timing belt tooth design. This tooth pitch is commonly used for conveying applications (Conveyor belts). The tooth profile is fairly low and has a large surface area at the tip of the tooth providing good support on sliding conveyor surfaces.
In stock
+ −
Add to wish list
BLT-150XL 150XL, .200” Pitch, 10mm Wide, 381.00mmLong, Close-Ended Synchro belt (Timing Belt)
US$5.95

This classic trapezoidal pitch is the original timing belt tooth design. This tooth pitch is commonly used for conveying applications (Conveyor belts). The tooth profile is fairly low and has a large surface area at the tip of the tooth providing good support on sliding conveyor surfaces.

In stock
+ −
Add to wish list
BLT-78XL XL78, .200” Pitch, 10mm Wide, 198.12mm Long, Close-Ended Synchro belt (Timing Belt)
US$4.54
This classic trapezoidal pitch is the original timing belt tooth design. This tooth pitch is commonly used for conveying applications (Conveyor belts). The tooth profile is fairly low and has a large surface area at the tip of the tooth providing good support on sliding conveyor surfaces.
In stock
+ −
Add to wish list
RT314005 Relay, SPST Power PCB 5VDC 16A Non-Latching
US$8.23
Relay, SPST Power PCB 5VDC 16A Non-Latching. Coil resistance 61 OHMS. Contact 1 Form A.
Delivery within 2-3 weeks
+ −
Add to wish list
GAMES-09 Zero Delay USB Arcade Encoder Kit
US$15.33
This device allows you to connect your old/new arcade buttons controller to your computer via USB. It works instantly without any delay for best gaming experience. It Supports all arcade Joysticks and Push Buttons of size 2.8 connector. It works on Windows 7/8/10 as well as Raspberry Pi’s RetroPi operating system. It supports most arcade emulators i.e. MAME, JAMMA etc..  It is very simple to use. All you need is to connect your arcade controls into the encoder board with the included wires, then plug the encode via the provided USB plug like any modern controller would. And then enjoy your arcade games!
In stock
+ −
Add to wish list
SENS-H206 H206 Opto-coupler Speed Measuring and Counting Sensor
US$4.89
This is a wide voltage range, high resolution, responsive, digital output speed module. It is capable of measuring the rotational speed of the provided wheel accurately and rapidly. It is ideal for applications where one wants to get the rpm of a certain motor. It includes a wheel with slots around the edges that allows the photo-electric sensor to measure the motor speed.
In stock
+ −
Add to wish list
MOT-JGY370-12V18 12VDC/18RPM Reversible High Torque Worm Geared DC Motor
US$15.33
This is a high torque geared DC motor with a 90 degrees output shaft. It consists of a DC motor with a metal worm gear mated to a transmission. It is capable of delivering adequate torque for your needs such as situations that require high amount of torque without the precision of a stepper motor (i.e. opening a door or a window mechanism, small winch, diy kits, etc.)
In stock
+ −
Add to wish list
MOT-JGY370-12V10 12VDC/10RPM Reversible High Torque Worm Geared DC Motor
US$15.33
This is a high torque geared DC motor with a 90 degrees output shaft. It consists of a DC motor with a metal worm gear mated to a transmission. It is capable of delivering adequate torque for your needs such as situations that require high amount of torque without the precision of a stepper motor (i.e. opening a door or a window mechanism, small winch, diy kits, etc.)
In stock
+ −
Add to wish list
MOT-JGY370-12V40 12VDC/40RPM Reversible High Torque Worm Geared DC Motor
US$15.33
This is a high torque geared DC motor with a 90 degrees output shaft. It consists of a DC motor with a metal worm gear mated to a transmission. It is capable of delivering adequate torque for your needs such as situations that require high amount of torque without the precision of a stepper motor (i.e. opening a door or a window mechanism, small winch, diy kits, etc.)
In stock
+ −
Add to wish list
SERVO-HORN 25T Metal Servo Horn/Arm
US$2.79
This is an aluminum bolt-on arm for 995, 996, 946 servos. It is great for application where plastic arms are simply too weak for the amount of torque the servo is outputting. It is great for RC and DIY projects with torque. Two m2 screws are included to fasten and clamp the arm into the servo. The mounting threads are M3 sized (M3 screws are not included).
In stock
+ −
Add to wish list
FUSE-KIT-GMA GMA Fuse Kit
US$14.94
This is a 100 piece GMA (5x20mm) Fast Blow Fuse Kit.  Contains 10 different values from 0.2A to 20A.  Comes in a plastic container with fuses identified in labeled dividers.
In stock
+ −
Add to wish list
MOD-150 5A 12VAC Circuit over load protection Relay module
US$13.13
This breakout board protects your circuit from over loading or shorting via a switching relay.  Specifications: Operating Voltage: 5VDC. Maximum current detection: 5A. Dimensions: 48 X 40 X 22 mm (L x W x D).
In stock
+ −
Add to wish list
BLT-GT2-S-1M Steel-Reinforced, GT2, 2mm Pitch, 6mm wide, 1meter long open-ended Belt
US$5.59
Excellent for linear movement of x and y axis components. The embedded steel cables make this belt reliable and stretch-free for long term use. The grooves are 2mm and work effectively on 2mm pitch GT2 tooth pulleys.
In stock
+ −
Add to wish list
413-ADA Large push-pull solenoid
US$23.03
This solenoid in particular is nice and strong, with a 40mm long body and a 'captive' armature with a return spring. This means that when activated with up to 12VDC, the solenoid moves and then the voltage is removed it springs back to the original position, which is quite handy. Many lower cost solenoids are only push type or only pull type and may not have a captive armature (it'll fall out!) or don't have a return spring. This solenoid has 4xM3 (metric) threaded holes in the bottom for easy mounting.
In stock
+ −
Add to wish list
135 - 149
143 144 145 146 147 148 149 150 151 152 153 154 155 156 157
151 - 165