Our Brands

Electromechanical

132 - 146
140 141 142 143 144 145 146 147 148 149 150 151 152 153 154
148 - 162
Newest Items First
15 Per Page
MOT-L298-S L298 2A per channel, Dual Motor Driver Shield for Arduino Microcontrollers
US$15.33
Dual Motor (Input A and Input B) driver to drive two motors independently, either forwards or backwards. Commonly found in RC Cars, Autonomous Cars and Arduino Cars. Can be used for driving inductive loads such as relays, solenoids and stepper motors that are Bi-Polar.
In stock
+ −
Add to wish list
FT90R 4.8-6V 360 degree Continuous Rotation Digital Servo
US$10.43
The FT90R is a micro-sized digital servo that has been built by FEETECH specifically for continuous rotation. At 6 V, it has a maximum rotation speed of around 170 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects; just throw on a pair of wheels (FS90R-W) and your robot is ready to roll!
In stock
+ −
Add to wish list
FT5121M High-Torque, High-Voltage Digital Servo
US$67.13
The FT5121M is a standard-size digital servo from FEETECH that can deliver over three times the torque of our standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the larger FT5335M giant servo, which can deliver 550 oz-in at 7.4 V, and if you need more speed in a servo with the same dimensions as the FT5121M, consider the FT5313M). The output shaft is supported by two ball bearings for reduced friction.
In stock
+ −
Add to wish list
FT5313M High-Torque Digital Servo
US$62.93
The FT5313M is a standard-size digital servo from FEETECH that can deliver over twice the torque of our standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the FT5121M, which has identical dimensions to the FT5313M). The output shaft is supported by two ball bearings for reduced friction. The FT5313M works with standard RC servo pulses, providing a running angle of approximately 120° over a servo pulse range of 900 µs to 2100 µs. Many hobby servos can be operated beyond their standard ranges by using a wider pulse range, but please note that in our tests, we were not able to expand the range of the FT5313M significantly beyond 120° (the servo did not respond to pulses below around 800 µs or above around 2100 µs, providing an approximate expanded range of 135°). This servo has a 10″ (25 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
In stock
+ −
Add to wish list
FS0307 Sub-Micro Servo
US$8.05
This is a great general-purpose actuator for tiny mechanisms. The FS0307 is a very small 4.4 g analog servo from FEETECH (formerly known as Fitec) that offers position control over an approximate 120° operating angle for servo pulses between 900 µs and 2100 µs. As with most servos, the pulse range can be expanded to achieve an expanded operating angle, but the limits of this are not specified by FEETECH. (In our tests, we were able to get an expanded range of approximately 180° over a pulse range of 650 µs to 2500 µs, but as this is not part of FEETECH’s official specifications, it is possible different units will behave differently in this regard.)
In stock
+ −
Add to wish list
FS0403 Sub-Micro Servo
US$7.49
This is a great general-purpose actuator for tiny mechanisms. The FS0403 is a very small 5 g analog servo from FEETECH (formerly known as Fitec) that offers position control over an approximate 120° operating angle for servo pulses between 900 µs and 2100 µs. As with most servos, the pulse range can be expanded to achieve an expanded operating angle, but the limits of this are not specified by FEETECH. (In our tests, we were able to get an expanded range of approximately 180° over a pulse range of 650 µs to 2500 µs, but as this is not part of FEETECH’s official specifications, it is possible different units will behave differently in this regard.) The servo has a 6″ (15 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible, and it includes additional servo horns and mounting hardware.
In stock
+ −
Add to wish list
MOT-H-55 Miniature DC Motor Metal Bracket for DIY Kits
US$0.34
This is a metal motor bracket that fastens and holds miniature dc motors and holds it against a flat surface using M2 screws. It also can be used to hold linear bearings allowing for linear shaft movement. It is great to be used in robotic projects and DIY kits. Sold by the unit.
In stock
+ −
Add to wish list
MOT-H-50 130 Type Motor Metal Bracket for DIY Kits
US$0.49
This is a metal motor bracket that fastens and holds a 130 sized dc motor and holds it against a flat surface using M2 screws. It has a thickness of 0.5mm. It is great to be used in robotic projects and DIY kits. Sold by the unit.
In stock
+ −
Add to wish list
MOT-H-11 996/995 Servos U-Shaped Bracket
US$3.49
This bracket is specifically designed for MG995 and MG996 servo motors. It allows for rotational movement on one axis. It does not include motor or installation hardware. It is made from light and strong aluminum.
In stock
+ −
Add to wish list
MOT-H-10 3x1 Plastic L Type Corner Bracket 10/pk
US$3.49
This is a plastic L-type corner bracket. It is great to be used in DIY kits for mounting motors, shafts or simply connecting two perpendicular surfaces together. The holes are 2.1 mm diameter.
In stock
+ −
Add to wish list
MOT-H-10H 1x3 Plastic L Type Corner Bracket 10/pk
US$3.49
This is a plastic L-type corner bracket. It is great to be used in DIY kits for mounting motors, shafts or simply connecting two perpendicular surfaces together. The holes are 2.1 mm diameter.  10/pk
In stock
+ −
Add to wish list
MOT-H-08 140 Motor Bracket
US$0.55
This is a white ABS DC motor mount for 140 type DC motor. It can be used as a demonstration mount for dc motors.
In stock
+ −
Add to wish list
MOT-H-05 996/995 Servos U-Shaped Bracket
US$3.49
This bracket is specifically designed for MG995 and MG996 servo motors. It allows for rotational movement on one axis. It does not include motor or installation hardware. It is made from light and strong aluminum.
In stock
+ −
Add to wish list
MOT-H-20B N20 Black Motor Support Bracket
US$1.39
This is an inexpensive motor support bracket for N20 type motors such as the Pololu Micro Metal Gear series motors. Includes mounting screws and nuts.
In stock
+ −
Add to wish list
3431-ADA Mini LED Arcade Button - 24mm Translucent Yellow
US$4.24
The buttons screw in place, so you can use with up to ~15mm thick material, and will cover up if the hole if it isn't perfectly round and clean. The action is smooth, without a strong click, yet you can definitely feel when the button is pressed. A tiny micro-switch is pre-installed, with gold plated contacts.
In stock
+ −
Add to wish list
132 - 146
140 141 142 143 144 145 146 147 148 149 150 151 152 153 154
148 - 162