MOT-17HS8401B 17HS8401B Nema 17 42x42x48mm 1.7A Bi-Polar Dual Phase 1.8° Stepper Motor

17HS8401B Nema 17 42x42x48mm 1.7A Bi-Polar Dual Phase 1.8° Stepper Motor

17HS8401 bi-polar stepper motors are used very commonly in a lot of 3D printers and RepRap CNC machines. It can also be used in general control machinery, automation and robotics applications.

A NEMA 17 stepper motor is a stepper motor with a 1.7 x 1.7 inch (42.3 x 42.3 mm) faceplate. The motor conveniently connects via a typical 6 pin JST connector.

This unit comes with a 6-pin female JST to 4 pin female header cable.

Specifications

• Phase: 2-phase step drive
• Step angle: 1.8 ± 5% °/Step
• Current: 1.7 A/phase
• Resistance: 1.8 ± 10% Ω/Phase
• Inductance: 3.2 ± 20% mH/Phase
• Holding Torque: 52 N.cm (4.6 lb.in)
• Detent Torque: 2.6 N.cm (0.23 lb.in)
• Rotational Inertia: 68 g.cm² (0.37 oz.in²)
• Insulation Class: B (see table below for temperatures)
• Ambient Temperature Required: -20 to 50°C (-4 to 122°F)
• Pinout: Red = A+
  Green = A-
  Black = B+
  Blue = B-
  *The two unused pins are “common pins” and are used in uni-polar mode.
• Body Dimensions: 41.8 x 41.8 x 47.3 mm ( 1.65 x 1.65” x 1.86” )
• Shaft Diameter: 5mm
• Shaft Length: 21mm
• Weight: 350g (12.4 oz.)