Our Brands

Wireless Bluetooth

1 2 3 4
Newest Items First
15 Per Page
WL-JDY-67 JDY-67 dual-mode Bluetooth audio module
US$4.54
The  JDY-67 adopts a three-mode Bluetooth solution design, supports audio and BLE and SPP to work at the same time, supports serial commands to set the...
In stock
+ −
Add to wish list
WL-BT04-E Wireless Serial Port Transparent Bluetooth Module
US$6.32

Adds Bluetooth connectivity to your project! Operates at 5V, which means you can interface this simple device to any micro controllers. This bluetooth module is BLE4.2 Version and comes with SPP3.0 module.The added simplicity of the six pre-soldered connectors results in a very easy n' quick plug and play for any future projects. This device can work up to 10 meters, the voltage supplied must not exceed 6v and it is not reverse polarity protected. Use this device for any project you may have in mind and rest assured this Bluetooth based device will consume less power than a traditional WIFI Module! No Firmware = No Fuss, logic Levels of RX & TX are 3.3V.

In stock
+ −
Add to wish list
WL-TTGO-T-ENERGY T18- WiFi and Bluetooth Module 18650 Battery ESP32 WROVER Development Board
US$20.88
This module has s ingle-/dual-core 32-bit LX6 microprocessor combining  Wi-Fi and Bluetooth wireless capabilities. ESP32 development board comes with...
In stock
+ −
Add to wish list
ZIG-500 Smart RF04EB ZigBee Emulator Downloader Enterprise Edition CC1110 CC2530 Bluetooth
US$13.60
This CC Debugger is primarily used for debugging and programming the flash on CCxxxx 8051-based System-on-Chip (SoC) devices from . CC Debugger also supports CCxxxx RF transceivers. In addition, CC Debugger is used for configuring the CC85xx devices with PurePath Wireless Configurator.
In stock
+ −
Add to wish list
IBEACON-2032, iBeacon Module Bluetooth 4.0 BLE Support Near-field Positioning Sensor Wireless Acquisition
US$17.70
This module is a iBeacon Bluetooth module 4.0+ used as support for near-field positioning sensor wireless acquisition.
In stock
+ −
Add to wish list
AB-02 BLE Bluetooth 5.0 Low Power Mesh Networking Module
US$7.11
This is a general-purpose Bluetooth module designed by Ensign Technology for the Internet of Things.
In stock
+ −
Add to wish list
nRF52832 BLE4.2 Module with PA
US$17.73
The PTR9618PA ultra-low power Bluetooth Low Energy/ANT/2.4GHz Proprietary Multi-protocol modules based on the Nrf52832 from Nordic Semiconductor. The module with an ARM Cortex M4F 32 bit processor, embedded 2.4GHz transceiver, and integrated antenna provide a complete solution with no additional RF design, allowing faster time to market, while simplifying designs, reducing BOM costs, also reduce the burden of Regulatory approvals to enter the world market.
In stock
+ −
Add to wish list
ESP32-PICO-KIT Development Board
US$33.53
ESP32-PICO-KIT is a mini IoT development board with functionalities of WiFi and Bluetooth. With a size of 52x 20.3x10mm, the module integrates a 4 MB SPI flash, and a USB-UART Bridge circuit, allowing the developers to connect the board a PC’s USB port for downloading and debugging. Featuring a compact body, robust performance and low power, this product is well suited for any space-limited or battery-operated applications, such as wearable electronics, medical equipment, sensors, and other IoT products.
In stock
+ −
Add to wish list
ESP32 WIFI+BLE Module (IPEX antenna)
US$10.95
ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features an IPEX antenna, a 4MB external SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The module targets a wide variety of applications from low power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding.
In stock
+ −
Add to wish list
ESP32 WIFI+BLE Module (PCB antenna)
US$10.95
ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The module targets a wide variety of applications from low power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding.
In stock
+ −
Add to wish list
WD-4510AC 2-in-1 Wireless Wi-Fi 2.4G/5G Bluetooth 5.0 USB Dongle
US$17.97
Need a Bluetooth or a WiFi Adapter and you only have one free USB port available? This device solves that particular issue, you can now have Wi-Fi and Bluetooth in one device. Plug and Play works with Windows, MAC OS and Linux.
In stock
+ −
Add to wish list
Wireless Bluetooth MP3 Audio Receiver board
US$9.79

Wireless Bluetooth Receiver and player stereo dual speaker powered via microUSB or Lipo battery Bluetooth 4.2

In stock
+ −
Add to wish list
JDY-10M Bluetooth 4.0 Module
US$13.99
JDY-10 transparent transmission module is based on Bluetooth 4. 0 protocol standard, working at 2. 4GHz frequency range. This module can maximum transmit at 50 meters with low power consumption. It uses GFSK Modulation technique.
In stock
+ −
Add to wish list
JDY-16 Low power High speed Bluetooth 4.2 BLE module
US$7.23
Want to add latest Bluetooth connectivity to your project? Here is the JDY-16 smallest Bluetooth module with latest 4.2 BLE version. This operates from 1.8 to 3.3 V DC, which means you can interface this simple device to any microcontrollers. This version Bluetooth modules supports Transparent, IO, RTC, PWM functions and has high speed data rate @ 115200 baud rate. This new module works on 3 modes of operation and supports UART and I2C communication mode.
In stock
+ −
Add to wish list
JDY-19 Ultra Low power Bluetooth 4.2 BLE module
US$4.98
JDY-19 is a transparent transmission module based on Bluetooth 4.2 protocol standard, working at the 2.4GHz frequency. This module works with the maximum transmission power of 4dB and up to 80 meters distance. This operates from 1.8 to 3.6 V DC, which means you can interface this simple device to any microcontrollers.
In stock
+ −
Add to wish list
1 2 3 4