Our Brands

Wireless

1 - 14
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
16 - 26
Newest Items First
15 Per Page
27mm 315MHz Spring Antenna
US$0.99
This is a gold plated spring antenna designed for a wireless communication system for frequency 315MHz. it has good VSWR, stable performance and good anti vibration.
In stock
+ −
Add to wish list
433MHz RF Antenna with SMA Connector
US$6.99
This is a Folded rubber rod antenna designed for a wireless communication system for frequency 433MHz. it has good VSWR, stable performance and good anti vibration.
In stock
+ −
Add to wish list
433MHz 3dBi RF Antenna with SMA Connector
US$5.59
This is an elbow 90 degrees antenna designed for a wireless communication system with frequency of 433MHz. it has good VSWR, stable performance and good anti vibration.
In stock
+ −
Add to wish list
433MHz RF Antenna with SMA Connector
US$5.59
This is an elbow rod antenna designed for a wireless communication system for frequency 433MHz. it has good VSWR, stable performance and good anti vibration.
In stock
+ −
Add to wish list
ESP32 WiFi and Bluetooth Development Board with OV2640 2MP Camera 
US$15.33
The ESP32-CAM has a very competitive small form factor not to mention the camera module that can operate independently as a minimum system with a footprint of 27x40.5x4.5 mm and a deep sleep current of up to 6mA only!
Delivery within 2-3 weeks
+ −
Add to wish list
Wireless Zigbee CC2531 Sniffer Packet USB Protocol Analyzer Module
US$12.59
The CC2531 is a USB enabled true system-on-chip (SoC) solution for IEEE 802.15.4, ZigBee and RF4CE applications. It enables USB dongles or USB upgradable network nodes to be built with low total bill-of-material costs.
Delivery within 2-3 weeks
+ −
Add to wish list
Molex Flexible GNSS Antenna - U.FL (Adhesive)
US$6.85
The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS, Galileo, BeiDou, and GLONASS in three different frequency bands (1561 +/-3MHz, 1575 +/-3MHz, 1602 +/-3MHz).
Delivery within 2-3 weeks
+ −
Add to wish list
SparkFun GNSS Chip Antenna Evaluation Board
US$38.28
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries. Six different chip antennas have been populated on this board, each with a U.FL connector to attach your chip to the antenna! We've even v-scored the board so you can snap the six antenna's apart and just have the one you need. If you aren't picky about your antenna and/or each of the antennas work well for your applications, you will get six antennas to use in various project. Since these are GNSS antennas, they will work with GPS as well as GLONASS, Galileo, BeiDou, and other worldwide systems.
In stock
+ −
Add to wish list
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
US$67.50
The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot of space. The on-board ZOE-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, BeiDou, and Galileo constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
Delivery within 2-3 weeks
+ −
Add to wish list
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
US$55.93
The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery, you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
Delivery within 2-3 weeks
+ −
Add to wish list
ANT-9145 SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
US$3.49
This RF adapter cable adapts the u.FL connection on an electronics module to an external antenna SMA connection. Often times, small electronics save space by using a u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM) on the PCB. This panel-mount SMA cable will connect to an antenna with RP-SMA (with pin in center). Most WiFi devices/routers that have a connector use RP-SMA.
In stock
+ −
Add to wish list
Adafruit RFM96W LoRa Radio Transceiver Breakout - 433 MHz - RadioFruit
US$30.73
Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren't so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can't send data as fast but you can send data a lot farther.'
In stock
+ −
Add to wish list
Adafruit RFM95W LoRa Radio Transceiver Breakout - 868 or 915 MHz - RadioFruit
US$30.73
Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren't so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can't send data as fast but you can send data a lot farther.'
Delivery within 2-3 weeks
+ −
Add to wish list
433MHz Antenna Module for LORA RA-02
US$4.19
This is the antenna suitable for Lora RA-02 Development board. It works at the 433MHz frequency and comes with IPEX connector.
In stock
+ −
Add to wish list
2.4GHz JDY-40 Wireless Communication Module
US$4.19
This is developed by 2.4GHz technology, with a distance of 120 meters. It uses a serial communication interface, which is simple and quick to use. You can use this product when you need to wireless communication using the serial port.
In stock
+ −
Add to wish list
1 - 14
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
16 - 26