Our Brands

Wireless

1 - 12
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
14 - 26
Newest Items First
15 Per Page
Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz - RadioFruit
US$48.91
This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the high power requirements of WiFi.
In stock
+ −
Add to wish list
SIM7600CE-T 4G(LTE) Shield for Arduino
US$120.00
SIM7600CE-T 4G(LTE) Shield is a 4G/3G/2G communication and GNSS positioning module. This shield is as small as a credit card and compatible with controller boards like Arduino UNO, arduino Leonardo, arduino Megaetc. The frequency bands that SIM7600CE-T 4G(LTE) Shield supports are LTE-TDD/ LTE-FDD/HSPA+/TD-SCDMA/EVDO and GSM/GPRS/EDGE. It also supports LTE-CAT4(with uplink rate 50 Mbps and downlink rate 150 Mbps).
Delivery within 2-3 weeks
+ −
Add to wish list
ESP-12S, WiFi Module Based on ESP8266
US$6.99
The ESP-12S is a WiFi module based on ESP8266, with built-in 32Mbit Flash, in the small SMD16 package. There're also onboard PCB antenna and metal shield. In short, it's a small form factor and fairly high cost effective WiFi module.
In stock
+ −
Add to wish list
SX1262 LoRa HAT for Raspberry Pi, 915MHz Frequency Band, for America
US$36.39
This is a Raspberry Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
In stock
+ −
Add to wish list
STM32 IoT Microcontroller with LoRa Node 433MHz
US$34.99

This is a LoRa Node end device that is based on the STM32L151CBU6, which is an ultra low-power MCU based on ARM Cortex M3 Architecture. It also comes with a 433MHz module that is capable of LoRa based communication and a 433MHz antenna!

In stock
+ −
Add to wish list
Wireless Bluetooth MP3 Audio Receiver board
US$9.79

Wireless Bluetooth Receiver and player stereo dual speaker powered via microUSB or Lipo battery Bluetooth 4.2

In stock
+ −
Add to wish list
4G / 3G / GNSS HAT for Raspberry Pi, LTE CAT4, for North America
US$97.99
The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
In stock
+ −
Add to wish list
JDY-10M Bluetooth 4.0 Module
US$13.99
JDY-10 transparent transmission module is based on Bluetooth 4. 0 protocol standard, working at 2. 4GHz frequency range. This module can maximum transmit at 50 meters with low power consumption. It uses GFSK Modulation technique.
In stock
+ −
Add to wish list
USB TO ESP8266 Mini Development Board
US$9.98
This USB development board based on the ESP8266 module. The board comes with CH340 USB to TTL Logic converter which makes programming easier. It is easy to connect the board to the PC and debug it. ESP-07 is a WIFI serial transceiver module, based on the ESP8266 SoC, the SoC has built a TCP/IP protocol stack.
In stock
+ −
Add to wish list
Industrial Serial TTL UART to WiFi Module
US$19.95
WIFI232-A2 is a high performance UART WiFi module with shield case and onboard antenna. It is designed for occasions where large data flow is required and power consumption will not be a concern.
In stock
+ −
Add to wish list
Grove - GPS
US$39.95
This Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 (U-blox 6 is old version) and serial communication configuration. It features 22 tracking / 66 acquisition channel GPS receiver. The sensitivity of tracking and acquisition both reach up to -160dBm, making it a great choice for personal navigation projects and location services, as well as an outstanding one among products of the same price class.
In stock
+ −
Add to wish list
8 Relay Wireless Remote Control
US$33.59
Features: 8 Relay Module with Remote Control. Remotely control up to 8 devices up to 200 meters away. Eight 10 Amp relays rated at 125VAC. Extremely easy to set up and use. This remote control is perfect for domestic applications such as remote lighting and appliance control, up down control for motorized window shades, electric door entrance access, etc. Excellent as a simple wireless remote control for robotics applications. The relays are set to toggle action (press once to activate relay, press same button second time to release) Multiple relays can be activated to stay on at the same time.
In stock
+ −
Add to wish list
2 Relay Wireless Remote Control
US$17.99
Features: 2 Relay Module with Remote Control. Remotely control up to 2 devices up to 200 meters away. Two 10 Amp relays rated at 125VAC. Extremely easy to set up and use. This remote control is perfect for domestic applications such as remote lighting and appliance control, up down control for motorized window shades, electric door entrance access, etc. Excellent as a simple wireless remote control for robotics applications. The relays can be set to toggle action, momentary or jog action by setting the jumper next to the programming button. Multiple relays can be activated to stay on at the same time.
In stock
+ −
Add to wish list
GPS Shield With Antenna
US$34.75
The GPS Shield is base on the ublox's NEO-6M receiver module , and the footprints is compatible with Arduino/MEGA boards. The regular GPS pins (RX, TX) can be connected to D0-D7 of Arduino. Support software SerialPort and Micro SD card interface. It's very easy to use. You just need read SerialPort and then you will get the GPS data. The GPS Shield module interfaces to the customer and application via one serial port, which uses CMOS voltage levels. support 3.3V / 5V IO operating. That's means 100% all Arduino mainboard compatible.
In stock
+ −
Add to wish list
RFM69 Shield
US$15.24
The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. It’s perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.
In stock
+ −
Add to wish list
1 - 12
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
14 - 26