This is a D.I.Y .4 DOF Robot Wooden Manipulator Arm Kit with Clamp Claw for Arduino, Raspberry Pi
This is an economical 4-DOF robotic arm. Each joint can driven by a MG90S servo and can be controlled using Arduino, or Raspberry Pi.
Features:
- Affordable 4-DOF manipulators, each articulated with MG90S servo, the overall use of wood material, lightweight.
- Mechanical parts are highly versatile
- Wood board laser cutting, precision
Specifications:
- Name: 4-DOF Robot Arm Kit
- Material: Wood (assorted hardware)
- Weight: about 200g
- Servo: 4 mini MG90S servos
- Total length of product: about 350mm
- Arm extended maximum length: about 200mm
- Gripper clamping width: 39mm
- Width: about 95mm
MG90 Servo:
- Size: 23mmX12.5mmX29.5mm
- Weight: 9 grams
- No load speed: 0.12 sec / 60 deg (4.8 V)
- Blocking torque: 1.2-1.4 kg / cm (4.8V)
- Operating temperature: -30~~+60 degrees Celsius
- Dead zone setting: 7 microseconds
- Working voltage: 4.8V-6V
WARNING
