WAVE-22560, RM502Q-AE 5G HAT for Raspberry Pi, quad antennas LTE-A, multi band, With Case

Price:
US$532.76
WAVE-22560
Delivery within 2-3 weeks
+
Add to wish list

The WAVESHARE 22560 is a communications HAT For the Raspberry Pi. It comes with quad antennas, an RM502Q-AE and a case for your projects.

Features

  • Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android
  • USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication
  • Standard M.2 B KEY slot, compatible with different 5G modules: RM500U-CN / RM500Q-GL / RM500Q-AE / RM502Q-AE series
  • Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
  • Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
  • Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
  • 2x SIM card slot, dual card single standby, switchable via AT command
  • High efficiency power supply circuit, up to 3A output current

Standard M.2 B KEY Slot (RM502Q-AE)

  • Region / Provider: Global (except China)
  • Operating temperature: -30 °C ~ +70 °C
  • Extension temperature: -40 °C ~ +85 °C
  • Dimensions: 30.0 × 52.0 × 2.3 (mm)
  • Weight: 8.7 (g)
  • Power supply: 3.135~4.4 V, typical 3.7 V
  • Power consumption
    • 80 μA @ shutdown
    • 4.2 mA @ hibernate
    • 39 mA @ USB 2.0, idle
    • 54.5 mA @ USB 3.0, idle
  • FREQUENCY BAND
    • 5G:
      • 5G NR NSA: n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48*, n66, n71, n77, n78, n79
      • 5G NR SA: n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48*, n66, n71, n77, n78, n79
    • LTE:
      • LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12(B17), B13, B14, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71
      • LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48
      • LAA: B46
    • UMTS:
      • WCDMA: B1, B2, B3, B4, B5, B6, B8, B19
    • GNSS: GPS / GLONASS / BeiDou (Compass) / Galileo
  • DATA RATE
    • 5G SA Sub-6: downlink 4.2 Gbps; uplink 450 Mbps
    • 5G NSA Sub-6: downlink 5 Gbps; uplink 650 Mbps
    • LTE downlink 2 Gbps; uplink 200 Mbps
    • UMTS downlink 42 Mbps; uplink 5.76 Mbps

* means developing/planning/processing

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series And Jetson Nano, Stackable Design For More HATs

Case

Multiple Installation Methods, Convenient For Various Application Such As Industry

Applications

Dimensions

Shipping List

Weight: 0.579 kg

  1. Protection case kit x1
  2. M.2 TO 4G/5G HAT x1
  3. 5G Module x1
  4. Antenna 4pcs x1
  5. IPEX adapter cable 4pcs x1
  6. GNSS antenna x1
  7. 2*20PIN pin header x1
  8. 5V 3A Type-C power adapter x1
  9. Dual plug USB3.0 cable x1
  10. USB3.0 adapter x1
  11. USB2.0 adapter x1
  12. SMA protective cap 4pcs x1
  13. Screws pack x1

WIKI

Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov