The Waveshare 32176 is the CM5-DUAL-ETH-BASE module which is the 2.5Gb Dual Ethernet Base Board for Raspberry Pi CM5, Dual RJ45 Ethernet Ports, Supports Dual 4K Display Outputs and Dual MIPI Interfaces.
Part: CM5-DUAL-ETH-BASE
* for reference purposes only, the Raspberry Pi (CM5) Compute Module 5 is not included.
Package Contents:
1. CM5-DUAL-ETH-BASE x1
2. Screws and standoffs 4-pack x1
Dual Ethernet Base Board for CM5
Designed for Raspberry Pi Compute Module 5
Specifications
|
CM5 socket |
Suitable for all variants of Compute Module 5 |
|
Networking |
1000M Ethernet RJ45 port |
|
Connector |
Raspberry Pi 40PIN GPIO Header |
|
USB |
USB 3.2 Gen1 × 1 |
|
MIPI |
4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector) |
|
Video |
HDMI port × 2, supports dual 4K display outputs |
|
M.2 |
M.2 M KEY (PCIe Gen2/3 x 1) |
|
Storage |
TF card socket for Compute Module 5 Lite (without eMMC) variants |
|
Fan Header |
5V, 4PIN JST-SH PWM fan connector |
|
Others |
Onboard EEPROM and Encryption chip |
|
Power Input |
7V~36V wide voltage range |
|
Dimensions |
the base board: 109.0 × 91.5 (mm) |
What's the differences?
|
CM5 Base Board |
Interface count and specifications |
|||||||||||
|
PoE |
Gigabit |
40PIN |
PCIe |
USB① |
MIPI |
HDMI |
RTC |
Fan |
Power |
Features |
||
|
|
|
√ |
|
3.0×1 |
×2 |
|
SH1.0 |
√ |
5V |
CM5 sized |
||
|
|
×1 |
√ |
16PIN PCIe |
3.0×1 |
×2 |
√ |
SH1.0 |
√ |
5V |
CM5 sized |
||
|
|
×1 |
√ |
16PIN PCIe |
3.0×2 |
×2 |
×2 |
ML/CR1220 |
√ |
5V |
mini size |
||
|
|
×1 |
√ |
M.2 M KEY |
3.0×2 |
×2 |
×2 |
ML/CR1220 |
√ |
5V |
mini size, onboard EEPROM and encryption chip |
||
|
|
×2 |
√ |
|
3.0×1 |
|
|
SH1.0 |
√ |
5V |
dual ETH |
||
|
|
1G ×1 |
√ |
M.2 M KEY |
3.0×1 |
×2 |
×2 |
ML/CR1220 |
√ |
7V~36V |
dual ETH, onboard EEPROM and Encryption chip |
||
|
√ |
×1 |
√ |
M.2 M KEY |
3.0×2 |
×2 |
×2 |
ML/CR1220 |
√ |
5V |
USB×4 |
||
|
③ |
×1 |
√ |
M.2 M KEY |
3.0×2 |
×2 |
×2 |
ML/CR1220 |
√ |
5V |
Official IO base board |
||
|
Note |
① USB 3.0 is equivalent to USB 3.2 Gen1. |
|||||||||||
Connecting with Compute Module 5
standard CM5 socket and color-coded Raspberry Pi 40PIN GPIO header
suitable for Compute Module 5 Lite / eMMC series module
Supports connecting to M.2 NVMe Drive
Faster reading/writing speed compared to the TF card slot of Raspberry Pi,
greatly improving reading/writing efficiency of the system or files,
Supports booting Pi5 from NVME Solid State Drive
Applicable M.2 drive sizes
NVMe Drive Slot Support
More rich interfaces
What's On Board
- CM5 socket
Suitable for all variants of Compute Module 5 - 40PIN GPIO header
Suitable for connecting to various HAT / HAT+ modules - Programming
used for eMMC burning - PSW power button
Long press to force power off, short press to soft power off or on - BOOT button
Press before powering on and release it after powering on to enter burning mode - STAT LED
Dual LED indicators - DC power jack
- DC-DC power chip
- M.2 M KEY
Supports 2280 / 2260 / 2242 / 2230 NVMe Solid State Drives or AI modules - M.2 LED
keeps blinking when NVMe drive reading / writing - MIPI Interfaces
for connecting to DSI displays or CSI cameras - HDMI ports
Supports dual 4K outputs - RTC battery header
for connecting an external RTC battery to maintain real-time clock operation - USB 2.0 HUB chip
- USB 2.0 ports
- USB 3.2 Gen1 port
supports up to 5 Gbps reading / writing speed - 2500M Ethernet RJ45 port
supporting 10M / 100M / 1000M / 2500M network connections - 1000M Ethernet RJ45 port
supporting 10M / 100M / 1000M network connections - FAN header
for connecting the cooling fan, 5V, 4PIN JST-SH PWM fan connector - EEPROM and encryption chip
- USB to 2500M Ethernet chip
- TF card slot
for connecting a TF card with pre-burnt image (Lite variant ONLY) - Other function pins
Hardware disable function, write protection and chip address selection - IO-VREF selection
CM5 IO logic level: 3.3V (default) or 1.8V
Outline dimensions
About Compute Module 5
Newly upgraded, more powerful
- Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
- More options for RAM (2GB / 4GB / 8GB / 16GB)
- More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
- Faster eMMC Flash storage, up to 200 Mbps data rate
- Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
- Adopts B to B connectors, most compatible with Compute Module 4
- Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
- Onboard PCIe Gen 2 x1 interface, allows connecting more useful mod
WIKI: CM5-DUAL-ETH-BASE
