The Waveshare 32049 is the CM5-to-Pi5-Adapter module which is the CM5 To Pi 5 Adapter Board for Raspberry Pi 5, an alternative solution for Raspberry Pi 5, with Onboard Audio Header, and supports connecting to Microphone.
Part No.:CM5-to-Pi5-Adapter
* the CM5 is NOT included.
Package Contents:
CM5-to-Pi5-Adapter × 1
Audio-Adapter × 1
MX1.25 4PIN dual-plug cable ~200mm × 1
Screws pack × 1
CM5 To Pi 5 Adapter Board
Designed for Raspberry Pi Compute Module 5
Specifications
|
CM5 socket |
Suitable for all variants of Compute Module 5 |
|
Networking |
Gigabit Ethernet RJ45 port |
|
Connector |
16PIN PCIe (PCIe Gen2/3 × 1) |
|
USB |
USB 3.2 Gen1 × 2; |
|
MIPI |
MIPI 4-lane interface × 2 (22pin 0.5mm FPC connector) |
|
Video |
HDMI port × 2, supports dual 4K outputs |
|
Audio |
Onboard audio header comes with an audio adapter for connecting 3.5mm headphone / microphone, enabling audio input and output |
|
Storage |
TF card socket for Compute Module 5 Lite (without eMMC) variants |
|
Fan Header |
5V, 4PIN JST-SH PWM connector |
|
Power input |
DC 5V 5A |
|
Dimensions |
85 × 56 (mm) |
Check the Compute Module 5 Variants
Based on Raspberry Pi CM5
Use CM5 to reproduce the original appearance of the Pi 5 as much as possible.
Compatible with the interfaces of the Raspberry Pi 5
Install CM5 Easily
Onboard 40 PIN GPIO header and Standard CM5 connector
Supports Access To Compute Module 5 Lite / eMMC Series Boards
Onboard USB Audio Decoder Chip
Compared to the Raspberry Pi 5, the CM5-to-Pi5-Adapter adds an audio header,
supports microphone input.
What's On Board
P5
- CM5 socket
Suitable for all variants of Compute Module 5 - 40PIN GPIO interface
Suitable for connecting to various HAT / HAT+ modules - Power supply / Programming
5V / 5A power supply, or used for eMMC burning - STAT LED
Dual-color LED indicator - PSW power button
Long press to force power off, short press to soft power off or on - PCIe interface
for connecting various PCIe expansion boards - RTC battery header
for connecting an external RTC battery to maintain real-time clock operation - BOOT button
Press before powering on and release after powering on to enter the burning mode - Micro HDMI port × 2
supports 4k output - Extended audio interface
Expands audio header via USB, comes with an audio adapter for connecting 3.5mm headphone/Microphone - PoE 4PIN header
for connecting to PoE module - Dual MIPI interfaces
for connecting to DSI displays or CSI cameras - 4PIN JST-SH PWM Fan header
for connecting cooling fan, 5V power supply - USB 2.0 port × 2
- USB 3.2 Gen1 port × 2
Dual USB 3.2 Gen1 ports, supports simultaneous read and write, up to 5 Gbps speed. - Gigabit Ethernet RJ45 port
Supports 10M / 100M / 1000M network access - TF card slot
for connecting a TF card with pre-burnt image (Lite variant ONLY) - IO-VREF selection
CM5 IO logic level: 3.3V (default) or 1.8V - Other function pins
Hardware disable function or write protection
Wiki: CM5-to-Pi5-Adapter
