Development Boards

US$2.79
This enclosure is an acrylic based enclosure designed for the Pi Zero W and Pi Zero V1.3. This enclosure consists of a bottom and top plate with mounting screws and spacers included in the packaging. The plates come with a special brown paper to help protect the acrylic plate, as soon as it is removed you will be able to see through the plate.
In stock
+
Add to wish list

US$6.94
This enclosure consists of a bottom and top cover with mounting screws inside the case. The screws are recommended for fastening the Pi Zero to the bottom cover and the fastening the top cover to the bottom cover to prevent accidental opening. The cut outs allow for MicroSD insertion,
In stock
+
Add to wish list

US$17.25
DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals, and perceive this world. Raspberry Pi is a common master control board which is powerful in its functions, but the I/O pins of Raspberry Pi can read digital signals only, what's more, only through an external analog-to-digital conversion (ADC) module can it read signals of analog sensor or device, it is not convenient to use. DFRobot I2C ADS1115 16-bit ADC module is specially designed for Raspberry Pi and Gravity series analog sensors, which greatly reduces the difficulty of using the Gravity series analog sensors, plug and play, no welding, very convenient. The number of Gravity series sensors is large and its wide variety can meet the needs of various sensors of the Raspberry Pi.
In stock
+
Add to wish list

US$84.75
This SIM7000E Arduino NB-IoT/LTE/GPRS expansion shield is a wireless communication module produced by DFRobot and the design is based on SIMCom SIM7000E. This wireless communication module is designed for Arduino controllers, supporting multi-frequency LTE-FDD communication, dual-frequency GPRS/EDGE communication, NB-IoT communication. No matter prototype developments or small-batch productions, SIM7000C Arduino NB-IoT/LTE/GPRS expansion shield is the best solution to applications of low power consumption, low latency and meddle-throughput. Besides onboard GNSS (Global Navigation Satellite System), SIM7000E supports American GPS, Russian GLONASS, European Galileo, Japanese QZSS and Chinese BeiDou Navigation Satellite System. It can be widely applied to IoT applications such as long-distance control, moving tracking, long distance data uploading and shared bikes.
Delivery within 2-3 weeks
+
Add to wish list

US$5.59
This enclosure is a simple black cover designed for the Pi Zero W and Pi Zero V1.3. This enclosure consists of a bottom and top cover with mounting screws inside the case.
In stock
+
Add to wish list

US$6.94

This White and Red enclosure is designed specifically for the Raspberry Pi Zero W and Pi Zero V1.3.  This enclosure consists of the bottom cover with three different white covers. The first cover is the I/O slot cut-out for connecting to the GPIO pins [Highly recommend for Pi-Zero-WH], the second cover is for attaching a camera to the raspberry pi zero (please note if you have headers connected you cannot use this cover) and the final cover is a plain white cover (please note if you have headers connected you cannot use this cover).

In stock
+
Add to wish list

US$3.15
This tiny adapter cable has an additional ground inside touching a reversed pin on the microUSB side allowing the users to connect the device to their android phone or devices and load USB devices or even interface a USB mouse.
In stock
+
Add to wish list

US$2.79

This is a simple Mini HDMI connector that will plug into any device that has a Mini HDMI output port similar to the Raspberry Pi zeros and convert to a standard HDMI output to connect to your TV or monitor.

In stock
+
Add to wish list

US$12.69
Expand the connectivity of your Pi allowing you to connect keyboards, mice, WIFI dongles, and other USB devices while also having a super-handy Ethernet port for wired network connectivity. It is robustly constructed with good cable strain relief.
In stock
+
Add to wish list

US$29.98
This is a Raspberry Pi Zero W with Headers pre-soldered onto the board. The Raspberry Pi Zero W extends the Pi Zero family. Launched at the end of February 2017, the Pi Zero W has all the functionality of the original Pi Zero, but comes with added connectivity, consisting of: 802.11 b/g/n wireless LAN. Bluetooth 4.1. Bluetooth Low Energy (BLE).
In stock
+
Add to wish list

US$5.59
ST’s STM8S series of mainstream 8-bit microcontrollers covers a large variety of applications in the industrial, consumer and computer markets, particularly where large volumes are concerned. Based on the STM8 proprietary core, the STM8S series benefits from ST's 130 nm technology and advanced core architecture performing up to 20 MIPS at 24 MHz. In addition to embedded EEPROM and RC oscillators, the rich number of I/Os offered and the performance of its embedded peripherals is recognized as a differentiating key point versus competition.
In stock
+
Add to wish list

US$19.95
This board is one of the easiest way to connect the Raspberry Pi GPIO pins without the hassle of having jumpers going everywhere. It expands the 40-pin GPIO of Raspberry Pi to another set of 2x20 female pins in addition to an extra 40 pins male jumpers, it also includes a pair of mini jumpers to configure the GPIO. The expanded GPIO layout is clearly being labelled and the press-to-release terminal blocks make connecting sensors and devices to your PI a joy. It is compatible with raspberry pi 3 Pi 2 model B and B+.
In stock
+
Add to wish list

US$5.98
This neat little shield mounts on the WEMOS-D1 Mini and allows the user to power the controller using a 3.7VDC LiPo Battery. It is not only capable of charging the battery but also powering the board with a micro USB cable or with any 5VDC power adapter. A resettable fuse triggers and shuts down the system when the amperage drawn exceeds 1A whenever there is a short or too much amperage drawn from the battery.
In stock
+
Add to wish list

US$14.92
The A-Star 328PB Micro is a tiny programmable module featuring the ATmega328PB AVR microcontroller, a backward-compatible replacement for the popular ATmega328P that features more general-purpose I/O and many additional peripherals. This module provides access to all 24 digital input/output pins (of which 9 can be used as PWM outputs and 8 as analog inputs), all on a board measuring only 1.3″ × 0.7″. It ships preloaded with an Arduino-compatible serial bootloader that enables programming through the Arduino IDE via a USB-to-serial adapter, and the ISP pins are accessible for programming with an AVR programmer. This version features a 20 MHz resonator and a 5 V regulator that can be powered from 5.5 V to 15 V supplies.
In stock
+
Add to wish list

US$8.79
The ALPHA 8F328P-U is an Arduino compatible development board. You can use Arduino IDE to burn your program (Check attachment tab for driver or Here or Here) . The MCU used by ALPHA 8F328P-U is LGT8F328P, a MEGA328P compatible chip. The USB chip used is the HT42B534-1. The 8F328D architecture design is relatively new, with a simple peripheral function makes it far stronger than the MEGA328 especially the programming encryption capability is far beyond that of the MEGA328.
In stock
+
Add to wish list